Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Y2O3 and La2O3 on the Sintering Behavior of Alumina

Y2O3 및 La2O3 첨가가 알루미나의 소결거동에 미치는 영향

  • 이근봉 (경남대학교 대학원 첨단공학과) ;
  • 강종봉 (경남대학교 나노 신소재학과)
  • Received : 2015.12.31
  • Accepted : 2016.01.11
  • Published : 2016.02.27
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, to increase the strength and enhance the sintering property of $Al_2O_3$, $Y_2O_3$ and $La_2O_3$ were added; the effects of these additions on the sintering characteristics of $Al_2O_3$ were observed. Adding 1% of $Y_2O_3$ to $Al_2O_3$ repressed the development of abnormal particles and reduced the grain boundary migration of $Al_2O_3$, curbing pores to capture particles; as such, the material showed a fine microstructure. But, when over 2% of $Y_2O_3$ was added, the sintering property was reduced because of abnormal particle grain growth and pore formation in particles. Adding 1% of $Y_2O_3$ and $La_2O_3$ to $Al_2O_3$ led to the development of abnormal particles and formed pores in the particles; when over 3% of $La_2O_3$ was added, the sintering property was reduced because the shape of the $Al_2O_3$ particles changed to angled plates.

Keywords

References

  1. H. P. Cahoon and C. J. Christensen, J. Am. Ceram. Soc., 39, 337 (1956). https://doi.org/10.1111/j.1151-2916.1956.tb15599.x
  2. T. Ikegami, K. Kotani and K. Eguchi, J. Am. Ceram. Soc., 70, 885 (1987). https://doi.org/10.1111/j.1151-2916.1987.tb04911.x
  3. H. S. Kim, Trans. Korean Soc. Mech. Eng. A, 31, 425 (2007).
  4. J. W. Lee, H. S. Yoon, U. S. Chae, H. J. Park, U. Y. Hwang, H. S. Park, D. R. Park and S. J. Yoo, Korean Chem. Eng. Res., 43, 503 (2005).
  5. L. Qiao, H. Zhou, H. Xue and S. Wang, J. Euro. Ceram. Soc., 23, 61 (2003). https://doi.org/10.1016/S0955-2219(02)00079-1
  6. R. L. Coble, J. Appl. Phys., 32, 793 (1961). https://doi.org/10.1063/1.1736108
  7. M. Bettman, R. E. Chase, K. Otto and W. H. Weber, J. Catal., 117, 447 (1989). https://doi.org/10.1016/0021-9517(89)90354-0
  8. H. Schaper, E. B. M. Doesburg and L. L. Van Reijen, Appl. Catal., 7, 211 (1983). https://doi.org/10.1016/0166-9834(83)80009-8
  9. A. Celikkaya and T. J. Anderson, U. S. Patent, 7, 258 (2007).
  10. D. H. Riu, Y. M. Kong and H. E. Kim, J. Eur. Ceram. Soc., 20, 1475 (2000). https://doi.org/10.1016/S0955-2219(00)00023-6
  11. M. W. Yu and S. J. Lee, Korean J. Met. Mater., 52, 451 (2014). https://doi.org/10.3365/KJMM.2014.52.6.451