Journal of the Korean Crystal Growth and Crystal Technology (한국결정성장학회지)

The Korea Association of Crystal Growth (한국결정성장학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the manufacture of dissimilar metal jewelry using 3D printer

3D printer를 이용한 이종금속 주얼리 제작에 관한 연구

  • Lee, Jung-Soo (Program of IT-Design Fusion, Graduate School of NID Fusion Technology, Seoul National University of Science and Technology) ;
  • Cha, Kyung-Chul (Department of Metal Art & Design, Seoul National University of Science and Technology)
  • 이정수 (서울과학기술대학교 NID융합기술대학원, IT.디자인융합프로그램) ;
  • 차경철 (서울과학기술대학교 금속공예학과)
  • Received : 2016.01.18
  • Accepted : 2016.02.12
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

In the late 1990's implementation of CAD/CAM systems in 3D printer has been led to many changes in the jewelry industry. Low cost 3D printer has been started advertising in the jewelry in 2009 after expiration of key patents of FDM scheme. Mass jewelry production process will vary in appliance with direct production process of 3D printer production line. The studies presented in this variation is the jewelry manufacturing process using a 3D Printer and the different metals with different colors were also produced for bonding the prototype jewelry. Increasing the possibilities of 3D printer through them, presents a variety of jewelry mass production methods.

1990년대 후반 3D Printer를 활용한 CAD/CAM 시스템의 도입은 주얼리 산업에 많은 변화를 가져오게 되었다. 2009년 FDM방식의 특허 만료를 시작으로 주요 특허가 풀리면서 저가의 3D Printer가 주얼리 산업에 보급되었다. 주얼리 대량생산프로세스는 3D Printer가 생산라인의 한 부분을 차지하는 직접제조 프로세스로 변화할 것이다. 이러한 변화에 본 연구는 3D Printer를 활용한 주얼리 제조 프로세스를 제시하고, 다른 색상의 이종금속이 접합된 주얼리 시제품을 제작하였다. 이를 통하여 3D printer의 활용범위를 높이고, 주얼리 대량생산 방법의 다양성을 제시하였다.

Keywords

References

  1. J.Y. Koh, O.S. Song, J.H. Ryu and S.G. Shin, "Jewelry design automization using a 3D CAD", J. Academiaindustrial Technol. 2 (2001) 95.
  2. S.G. Choi, "RP equipment and samples for making jewelery", Cad & Graphics (2006) 114.
  3. S.C. Park, "About Korean precious metal industrial activation plan research", J. Korea Contents Asso. 9 (2009) 619.
  4. J.S. Lee and H.S. Kim, "A study on jewelry-making using a multi-casting", J. Korean Cryst. Growth Cryst. Technol. 22 (2012) 224.
  5. J.H. Lee, "A study on quality improvement of silver jewelry in lost wax casting", Graduate School of Techno Design Kookmin University (2014) 13.