Journal of the Korean Crystal Growth and Crystal Technology (한국결정성장학회지)

The Korea Association of Crystal Growth (한국결정성장학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the simulation for chatter vibration stability improvement of end milling process

엔드밀링 채터 안정성 개선을 위한 시뮬레이션

  • Hwang, Joon (Department of Aeronautical and Mechanical Design Engineering, Korea National University of Transportation) ;
  • Lee, Won-Kuk (Department of Advanced Mechanical Design Engineering, Korea National University of Transportation)
  • 황준 (한국교통대학교 공과대학 항공.기계설계학과) ;
  • 이원국 (한국교통대학교 산업대학원 첨단기계설계학과)
  • Received : 2016.01.26
  • Accepted : 2016.02.12
  • Published : 2016.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

End milling process is one of the broadly used manufacturing process for precision machined parts and products. Machining performance is often limited by chatter vibration at the tool-workpiece interface. Chatter vibration is a type of machining self-excited vibration which originated from the variation in cutting forces and the flexibility of the machine tool structure. Even though lots of cutting tooling methods are developed and used in machining process, precise analysis of cutting tooling effect in view of chatter vibration behavior. This study presents numerical and experimental approaches to verify and effects of various cutting parameters to affect to chatter vibration stability. Acquired knowledge from this study will apply the optimal cutting conditions to improve a machining process.

엔드밀링 공정은 3차원 형상의 다양한 부품, 제품, 금형을 가공하는데 널리 사용되고 있는 핵심 가공 프로세스이다. 가공정밀도 요구수준과 가공형상 난이도 수준이 날로 높아짐에 따라 가공정밀도 요구특성의 지속적인 향상에도 불구하고, 공작기계와 절삭공구를 이용한 절삭가공공정에서의 채터 진동은 아직도 개선의 여지가 많이 남아있다. 특히, 더욱 고속화, 고정밀화 되고 있는 가공현장에서 채터진동의 효과적인 감소대책에 대한 다양한 연구가 필요하다. 본 연구에서는 이러한 문제점을 해결하기 위해 엔드밀링공정에서 발생하기 쉬운 채터진동의 안정성을 향상시키기 위해 절삭모델에 근거한 채터진동 안정성 시뮬레이션 방법론을 연구하고, 엔드밀링 절삭조건이 채터진동에 미치는 영향을 다양한 조건하에서 예측하고자 하였다. 본 연구결과를 더욱 발전시켜 채터진동과의 상관성을 연구하고, 향후 채터진동 저감형 가공시스템 개발을 위한 근간 기술자료로 활용코자 한다.

Keywords

References

  1. G. Totis and M. Sortino, "Development of a modular dynamometer for triaxial cutting force measurement in turning", Int. J. of Machine Tool & Manufacture 51 (2011) 34. https://doi.org/10.1016/j.ijmachtools.2010.10.001
  2. V. Savas and C. Ozay, "The optimization of the surface roughness in the process of tangential turn-milling using genetic algorithm", The Int. J. of Advanced Manufacturing Technology 37 (2007) 335.
  3. F.I. Compean, D. Olvera, F.J. Campa, L.N. Lopez de Lacalle, A. Elias-Zuniga and C.A. Rodriguez, "Characterization and stability analysis of a multivariable milling tool by the enhanced multistage homotopy perturbation method", The Int. J. of Machine Tools & Manufacture 33 (2012) 28.
  4. C.K. Chang and H. Lu, "Design optimization of cutting parameters for side milling operations with multiple performance characteristics", The Int. J. of Advanced Manufacturing Technology 32 (2007) 18. https://doi.org/10.1007/s00170-005-0313-5
  5. V. Savas and C. Ozay, "The optimization of the surface roughness in the process of tangential turn-milling using genetic algorithm", The Int. J. of Advanced Manufacturing Technology 37 (2007) 335.
  6. J. Hwang, "A study on the chatter vibration characteristics sumulation for cutting tooling of turning machine tool", J. Korean Cryst. Growth Cryst Technol. 24 (2014) 274. https://doi.org/10.6111/JKCGCT.2014.24.6.274
  7. J.Y. Lim, M.J. Yoon, T.H. Kim, S.Y. Kim and T.G. Kim, "A study on the mechanical properties of structure rolled steel and stainless steel for the $CO_2$ welding", J. Korean Cryst. Growth Cryst. Technol. 23 (2013) 207. https://doi.org/10.6111/JKCGCT.2013.23.4.207