DOI QR코드

DOI QR Code

Evaluation on Flexural Behavior of Hybrid Beams with Rigid Joint Connecting Steel and Precast Concrete Elements

강재 보-PC 보가 강접합 연결된 하이브리드 보의 휨 거동 평가

  • Seo, Eun-A (Structural Engineering Research Institute, Korean Institute of Civil engineering and Building technology) ;
  • Yang, Keun-Hyeok (Department of Plant.Architectural Engineering, Kyonggi University) ;
  • Hong, Seung-Hyun (Han-Ju ST Co., Ltd.)
  • 서은아 (한국건설기술연구원 구조융합연구소) ;
  • 양근혁 (경기대학교 플랜트.건축공학과) ;
  • 홍승현 ((주)한주에스티)
  • Received : 2015.03.30
  • Accepted : 2015.09.30
  • Published : 2016.02.29

Abstract

A hybrid precast concrete beam system with a simple rigid connection was proposed to compensate the limitations and shortcomings of the conventional bolt connection associated with the H-beams embedded into concrete beams. Three beam specimens with fixed both ends were tested under one-point top cyclic loading to explore the effectiveness of the developed hybrid beam system in transferring externally applied flexure to a column. The main parameter considered was the length ($L_s$) of H-beam, which was selected to be $0.25L_I$, $0.5L_I$, and $1.0L_I$, where $L_I$ is the distance from the support to the point of inflection. All beam specimens showed a better displacement ductility ratio than the reinforced concrete beams with the same longitudinal reinforcement index, indicating that the cyclic load-deflection curve and ductility were insignificantly affected by $L_s$. The continuous strain distribution along the beam length and the prediction of the ultimate load based on the collapse mechanism ascertained the structural adequacy of the developed rigid connection.

기존의 강재 보가 콘크리트에 매립되어 볼트접합 연결되는 기존 하이브리드 접합법의 한계와 단점을 개선하기 위하여 단순한 강접합 절점을 갖는 하이브리드 PC 콘크리트 보 시스템을 개발하였다. 개발된 하이브리드 시스템의 원할한 하중전달을 파악하기 위하여 양단 고정단의 보 실험체 3개를 반복 집중하중 하에서 실험하였다. 주요 변수는 강재 보의 길이로서 지점에서 변곡점까지의 거리의 0.25, 0.5 및 1.0배로 변하였다. 모든 실험체는 동일 주철근 지수를 갖는 철근콘크리트 보에 비해 높은 변위 연성비를 나타냈는데, 보의 반복하중-처짐 관계 및 연성은 강재 보의 길이에 영향을 받지 않았다. 보 길이에 따른 연속 변형률 분포 및 붕괴하중에 기반한 극한하중 예측으로부터 제시된 강접합 절점은 구조적 효율성을 갖는다고 판단된다.

Keywords

References

  1. Moon, J. H., and Oh, Y. H., "Evaluation of Design Method and Shear Transfer Capacity on the Horizontal Interface of PC Composite Beams", Journal of the Korea Concrete Institute, Vol.25, No.1, 2013, pp.81-90. https://doi.org/10.4334/JKCI.2013.25.1.081
  2. Kim, O. J., Moon, J. H., and Lee, L. H., "Shear Strength of RS Hybrid Steel Beam with Reinforced Concrete Ends", Journal of Architectural Institute in Korea, Vol.17, No.5, 2001, pp.27-34.
  3. Yang, K. H., Oh, M. H., Kim, M. H., and Lee, H. C., "Flexural Behavior of Hybrid Precast Concrete Beams with H-Steel Beams at Both Ends", Engineering Structures, Vol.32, No.9, 2010, pp.2940-2949. https://doi.org/10.1016/j.engstruct.2010.05.013
  4. Roeder, C. W., "Overview of Hybrid and Composite Systems for Seismic Design in the United States", Engineering Structures, Vol.20, No.4, 1998, pp.353-363.
  5. Kim, S. E., and Nguyen, H. T., "Finite Element Modeling and Analysis of a Hybrid Steel-PSC Beam Connection", Engineering Structures, Vol.32, 2010, pp.2227-2569.
  6. Yang, K. H., Evaluation of Structural Performance and Establishment of Design Guideline of HRC-2 Beams, Technical Report(KCI R 15-002), Korea Concrete Institute, 2014.
  7. KBC 2009, Korean Building Code, KBC, Architectural Institute of Korea, 2009.
  8. FEMA 356, Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA, Washington DC., 2000.
  9. Yang, K. H., "Evaluation of Structural Performance and Establishment of Design Guideline of HRC-2 Beams", Technical Report KCI R 15-002, Korea Concrete Institute, 2015.
  10. Sheikh, S. A., and Khoury, S. S., "A Performance-Based Approach for the Design of Confining Steel in Tied Columns", ACI Structural Journal, Vol.94, No.4, 1997, pp.421-431.
  11. Mattock, A. H., "Discussion of 'Rotational Capacity of Reinforced Concrete Beam' by W. G. Corley", Journal of the Structural Division, ASCE, Vol.94, 1967, pp.519-522.
  12. Yang, K. H., Mun, J. H., Cho, M. S., and Kang, T. H. K., "A Stress-Strain Model for Various Unconfined Concrete in Compression", ACI Structural Journal, Vol.111, No.4, 2014, pp.819-826.