한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제24권1호
  • /
  • Pages.39-46
  • /
  • 2016
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

HCVT 구현 가능성 평가를 위한 해석모델 개발 및 특성검토

Developing Analysis Model for Evaluation of HCVT Materialization Possibility, and Examining It's Characteristics

  • 노대경 (가천대학교 대학원 기계공학과) ;
  • 정동수 (한국기계연구원 신뢰성평가센터) ;
  • 장주섭 (가천대학교 기계공학과)
  • Noh, Daekyung (Department of Mechanical Engineering, Graduate School, Gachon University) ;
  • Jung, Dongsoo (Department of System Reliability, KIMM) ;
  • Jang, Joosup (Department of Mechanical Engineering, Gachon University)
  • 투고 : 2015.06.16
  • 심사 : 2015.10.05
  • 발행 : 2016.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reviews design validity before manufacturing HCVT prototype through simulation. The component part is being devided, modeled and checked if it works well to an designer's original intent about some active modes. Also, the dynamic characteristic is examined how it changes according to alteration of pressure, friction and leak rate. Finally, HCVT design plan is being confirmed if it could be materialized through those analysis.

키워드

참고문헌

  1. D. T. Kim, "Pressure Ripple Reduction of Hydraulic Pump.Motor in HST," KSMTE Spring Conference Proceedings, pp.117-123, 2003.
  2. D. T. Kim and I. G. Yun, "Pressure Ripple Characteristics of Hydrostatic Transmission (HST)," KSMTE Autumn Conference Proceedings, pp.222-227, 1998.
  3. Y. H. Yoon, J. S. Jang and Y. S. Lim, "Analysis Model Development for Hydraulic Component and System Design," Transactions of KSFC, Vol.9, No.1 pp.56-69, 2012.
  4. D. K. Noh, J. S. Jang and S. Y. Uh, "Development of Injection Molding Machine Simulation Model Based on Hydraulic Circuit, and Operating Characteristic Examination," Transactions of KSAE, Vol.22, No.2, pp.7-16, 2014. https://doi.org/10.7467/KSAE.2014.22.2.007
  5. SimulationX User Manual and Library Manual, ITI GmbH, 2011.