DOI QR코드

DOI QR Code

Economic Comparison of the Concrete Structural Work for the System Form and the Truss Deck

시스템 폼과 트러스 데크의 골조 공사 경제성 비교 분석

  • Received : 2016.09.09
  • Accepted : 2016.11.23
  • Published : 2016.11.30

Abstract

The reduction of construction duration and cost is two of main success factors in the modern construction industry. Since reinforced concrete is the most economical material for construction, the large-scale form-work of concrete is also related to the competitiveness of construction method. Thus, the application of appropriate form-work system is one of key factors to reduce the construction cost, improve the quality of the finished concrete, shorten the construction period, and reduce the form-work collapse during the construction. The study conducted the case study to identify the cost differences between the steel-wire truss deck system and the table system form-work system. To compare the construction cost of two different form-work methods, the study estimated the total price for the form-work module of $14.4m{\times}4.8m$ with material quantities. This study identified that the slab cost of truss deck form-work system was 15% lower than the table system form-work even though the combination form-work cost of beam and slab for the truss desk was 19% higher than the combination form-work costs of system form-work. In addition, the study identified that the truss-deck form-work system also required the additional steel reinforcement of 77% compared to the table system form-work. Finally, the study concluded that the table system form-work could reduce the total construction costs of 15% through lowering the form-work cost of beam and slab, and steel reinforcement.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. Park, S. (2009). A study on suggestions safety management checklist by the system form, M.S. Dissertation, Yeungnam University.
  2. Lee, S. (2009). A Study regarding the problems in applying system forms to apartment houses and the improving methods for the problems, M.S. Dissertation, Yeungnam University.
  3. Park, J. (2010). An experimental study and proposed design method for triangulated truss type deck, M.S. Dissertation, Hoseo University.
  4. Ahn, J. (2003). Experimental test and performance evaluation of the truss deck, M.S. Dissertation, Hoseo University.
  5. Kim, H. (2010). Research on system form method construction case in the apartment housing project, M.S. Dissertation, Yeungnam University.
  6. Choi, Y. (2008). Hindrance factor and improvement of large-sized system form work in an apartment building construction, M.S. Dissertation, Hanyang University.
  7. Kim, T. (2013). Advanced system formwork and construction planning model for tall building construction, Ph.D. Dissertation, Korea University.
  8. Heo, B., Kwak, M., Bae, K., Jung, S., & Kang, S. (2007), Flexural capacity of the profiled steel composite beams with truss deck plate, Journal of Korean Society of Steel Construction, 19(4), 413-423.
  9. Choi, B., Moon, H., Han, H., & Han, K. (2009). Push-out performance test of composite steel truss deck using light weight concrete, Journal of Korean Society of Steel Construction, 21(1), 15-26.
  10. Sho, K., & Park. H. (2009). A study on the application of steel wire truss deck with continuous lattices to the longitudinal direction, Journal of the Architectural Institute of Korea Structure & Construction, 25(7), 165-172.
  11. Jin, S. (2012). An economic analysis according to the number of use by concrete form types, M.S. Dissertation, Chung-Ang University.
  12. Jang, Ho. (2009). The proposal of the construction method of reformation system form through the comparative study of staircase construction using a conventional type and system form, M.S. Dissertation, Tongmyong University.
  13. Han, S. (2000). A study of the reinforced concrete floor system according to the economic point of view, M.S. Dissertation, Suwon University.
  14. Chun, H. (2006). A study on economic effects of deck plate slab form system of RC frames, M.S. Dissertation, Kwandong University.
  15. Chung, P. (2008). Wooden system form typically substituting deck plate using truss rebars, M.S. Dissertation, Tongmyong University.