DOI QR코드

DOI QR Code

Developing Track Ballast Characteristic Guideline In Order To Evaluate Its Performance

  • Sadeghi, J.M. (Iran University of Science and Technology-School of Railway Engineering) ;
  • Zakeri, J. Ali (Iran University of Science and Technology-School of Railway Engineering) ;
  • Najar, M. Emad Motieyan (Iran University of Science and Technology-School of Railway Engineering)
  • Published : 2016.12.31

Abstract

In spite of recent advances in ballasted railway track, the correct choice of ballast for rail track is still considered critical because aggregates progressively deteriorate under traffic loading and environmental exposures. Various ballast requirements, functions and duties have been defined by researchers, railway companies and countries' regulations even though it needs to be integrated to make following proper decision during track operation and maintenance. A proper understanding of ballast properties and suitable tests are prerequisites for minimizing maintenance costs. This paper presents a capable classification for ballast characteristics which need to be investigated beforehand to such a way, firstly to assign ballast functions, secondly need to clarify ballast requirements, thirdly to map appropriate tests to evaluate ballast characteristics and then it must be such that if ballast cannot carry out one of these duties, be able to call there is ballast defect. The paper is structured in order to achieve these objectives.

Keywords

References

  1. Alva-hurtado, J. and E. Selig (1979). "Static and Dynamic Properties of Railroad Ballast."
  2. Alva-Hurtado, J. and E. Selig (1981). Permanent strain behavior of railroad ballast. Proceedings of The International Conference on Soil Mechanics and Foundation Engineering, 10th.
  3. Aursudkij, B. (2007). A laboratory study of railway ballast behaviour under traffic loading and tamping maintenance, University of Nottingham.
  4. Bach, H. and P. Veit (2013). Evaluation of attrition tests for railway ballast.
  5. Bathurst, R. J. and G. P. Raymond (1987). Geogrid reinforcement of ballasted track.
  6. Brattli, B. (1992). "The influence of geological factors on the mechanical properties of basic igneous rocks used as road surface aggregates." Engineering Geology 33(1): 31-44. https://doi.org/10.1016/0013-7952(92)90033-U
  7. Chanda, M. and R. Krishna (2003). "Selection and testing of ballast stones for underground railway tracks." African Journal of science and technology 4(2): 42-50.
  8. Chrismer, S. (1986). "Considerations of factors affecting ballast performance." American Railway Engineering Association 87.
  9. Dalton, C. (1973). "Field Durability Tests on Ballast Samples as a Guide to the Significance of the Specification Requirements." Canadian National Railways Technical Research Centre, St. Laurent, Quebec, Canada: 40.
  10. Debra, L. B. and T. S. Ernest (1990). "Abrasion tests for railroad ballast."
  11. DIPILATO, M., E. Steinberg and R. SIMON (1983). Ballast And Subgrade Requirements Study: Railroad Track Substructure--Design and Performance Practices, Federal Railroad Administration.
  12. Esveld, C. (2001). "Modern railway track."
  13. Hay, W. W. (1982). Railroad engineering, John Wiley & Sons.
  14. Indraratna, B. and D. Ionescu (1999). Deformation of ballast under static and dynamic loading. Pre-failure Deformation Characteristics of Geomaterials: Proceedings of the Second International Symposium on Pre-Failure Deformation Characteristics of Geomaterials: Torino 99: Torino, Italy 28-30 September, 1999, CRC Press.
  15. Indraratna, B., D. Ionescu, D. Christie and R. Chowdhury (1997). "Compression and degradation of railway ballast under one-dimensional loading." Faculty of Engineering-Papers: 403.
  16. Indraratna, B., H. Khabbaz and J. Lackenby (2003). Behaviour of railway ballast under dynamic loads based on large-scale triaxial testing. AusRAIL PLUS 2003, 17-19 November 2003, Sydney, NSW, Australia.
  17. Indraratna, B., H. Khabbaz and W. Salim (2004). "Ballast-formation-track interaction mechanism based on large scale laboratory testing." CORE 2004: New Horizons for Rail: 30.
  18. Indraratna, B., H. Khabbaz, W. Salim and D. Christie (2006). "Geotechnical properties of ballast and the role of geosynthetics."
  19. Indraratna, B., J. Lackenby and D. Christie (2005). "Effect of confining pressure on the degradation of ballast under cyclic loading."
  20. Indraratna, B., S. Nimbalkar and D. Christie (2009). "The performance of rail track incorporating the effects of ballast breakage, confining pressure and geosynthetic reinforcement."
  21. Ionescu, D. (2005). "Ballast degradation and measurement of ballast fouling." Railway technical review(2).
  22. Ionescu, D., B. Indraratna and H. D. Christie (1998). Deformation of railway ballast under dynamic loads. Conference on Railway Engineering Proceedings: Engineering Innovation for a Competitive Edge, Central Queensland University.
  23. Johansson, E., S. Lukschova and K. Miskovsky (2011). "Petrographic characteristics of granitoid and gabbroid intrusive rocks as a tool for evaluation of mechanical properties." E. Johansen (2011): Technological properties of rock aggregates. PhD Thesis, Lulea University of Technology, Lulea, Sweden.
  24. Johnson, D. (1985). Investigation of practical ballast specification requirements, Association of American Railroads.
  25. Kerr, A. D. (2003). Fundamentals of railway track engineering.
  26. Key, A. J. (1998). Behaviour of two layer railway track ballast under cyclic and monotonic loading, University of Sheffield.
  27. Knutson, M. (1977). Materials Foundation Study-Ballast and Foundation Materials Research Program, Tech. Rep FRA-OR&D-77-02, Federal Railroad Administration, Washington, DC, USA.
  28. Li, D. and E. T. Selig (1995). "Wheel/track dynamic interaction: track substructure perspective." Vehicle System Dynamics 24(sup1): 183-196. https://doi.org/10.1080/00423119508969624
  29. Meeker, L. E. (1990). Engineering and economic factors affecting the cost of railroad ballast.
  30. Nalsund, R. (2014). "Railway ballast characteristics, selection criterion and performance."
  31. Ozcelik, Y. (2011). "Predicting Los Angeles abrasion of rocks from some physical and mechanical properties." Scientific Research and Essays 6(7): 1612-1619.
  32. Parkin, A. and G. Adikari (1981). Rockfill deformation from large scale tests. Proceedings of the 10th International Conference Soil Mechanical and Foundations Engineering Stockholm.
  33. Raymond, G., P. Gaskin, J. Davies, K. Van Dalen and O. Svec (1975). Laboratory Performance of Railroad Ballast. Second Australia-New Zealand Conference on Geomechanics, Institution of Engineers, Australia.
  34. Raymond, G. P. (1978). "Design for railroad ballast and subgrade support." Journal of the Geotechnical Engineering Division 104(1): 45-60.
  35. Raymond, G. P. (1979). "Railroad ballast prescription: state-of-the-art." Journal of Geotechnical and Geoenvironmental Engineering 105(2).
  36. Raymond, G. P. and J. R. Davies (1978). "Triaxial tests on dolomite railroad ballast." Journal of Geotechnical and Geoenvironmental Engineering 104(ASCE 13835).
  37. Raymond, G. P., P. N. Gaskin and O. Svec (1975). Selection and performance of railroad ballast.
  38. Raymond, G. P. and D. R. Williams (1978). "Repeated load triaxial tests on a dolomite ballast." Journal of Geotechnical and Geoenvironmental Engineering 104(7).
  39. Robnett, Q., M. Thompson, W. Hay, S. Tayabji and R. Knutson (1975). Technical data bases report. Ballast and Foundation Materials Research Program.
  40. Selig, E., T. Yoo and C. Panuccio (1982). MECHANICS OF BALLAST COMPACTION. VOLUME I: TECHNICAL REVIEW OF BALLAST COMPACTION AND RELATED TOPICS.
  41. Selig, E. T. and J. M. Waters (1994). Track geotechnology and substructure management, Thomas Telford.
  42. Sharpe, P. (2000). Trackbed investigation. Journal and report of proceedings-Permanent Way Institution, Permanent Way Institution.
  43. Siller, T. (1980). "Properties of railroad ballast and subballast for track performance prediction." Master's project report. Con-crete Tie Correlation Study, Department of Civil Engineering, University of Massachusetts, Amherst.
  44. Simon, R., L. Edgers and J. Errico (1983). Ballast and Subgrade Requirements Study: Railroad Track Substructure-Materials Evaluation and Stabilization Practices.
  45. Thompson, M. (1977). "FAST Ballast and Subgrade Materials Evaluation." Ballast and Foundation Materials Research Program, University of Illinois at Urbana-Champaign. for US Federal Railroad Administration, Report No. FRA/ORD-77/32.
  46. Watters, B., M. Klassen and A. Clifton (1987). Evaluation of ballast materials using petrographic criteria.