DOI QR코드

DOI QR Code

Analysis of Two-Span Structures Constructed by Incremental Launching Method

ILM 공법에 의해 시공된 2경간 구조물의 해석

  • Kim, Sung Hoon (Dept. of Civil Engineering, Seoul National University of Science &Technology) ;
  • Kim, Bu Kyu (Technical Support Division, SUHHAN Architects & Engineers Inc.) ;
  • Choi, Jun Hyeok (Dept. of Civil Engineering, Bucheon University)
  • 김성훈 (서울과학기술대학교 건설시스템공학과) ;
  • 김부규 ((주)서한종합건축사사무소) ;
  • 최준혁 (부천대학교 토목공학과)
  • Received : 2015.11.25
  • Accepted : 2016.01.13
  • Published : 2016.02.27

Abstract

This paper presents the structural analysis of two-span structures constructed by incremental launching method to traverse the existing facilities. The structure with a relatively short launching span can not be secure the structural stability caused by excessive deflection and overturning prior to reaching the maximum strength, because the length of the other span is different or the rear structure is not continuous. In order to estimate the stability of the construction stages of deflection and the overturning, the structural analysis was carried out. The parameters of the analysis is launching span ratio of the launching nose and the upper structure, weight ratio and so on. From the analysis result, the effects of parameters were investigated and a deflection formula of the launching nose and the condition of the overturning of structure were proposed.

본 연구는 기존의 시설물을 횡단하기 위한 목적으로 시공된 지간장이 다른 2경간 연속 구조물을 대한 압출공법을 적용에 관한 것이다. 압출구간이 비교적 짧은 구조물은 인접 경간의 길이가 다른 경우가 많고 압출시 후방 구조물이 연속되지 않는 경우가 많기 때문에 부재 단면력이 최대 내력에 도달하기 이전에 과도한 처짐과 전도가 발생하여 구조적 안정성이 확보되지 못하는 경우가 있다. 이러한 구조물의 시공단계별 구조물의 처짐과 전도에 대한 안정성을 예측하기 위해서 해석적 연구를 수행하였다. 해석에서의 매개변수는 압출추진코와 상부구조물의 길이비, 지간비, 중량비 등이다.해석결과로부터 매개변수의 영향을 분석하였고 압출추진코에서의 구조물의 처짐과 전도 발생 조건식을 제시하였다.

Keywords

References

  1. Rosignoli, M. (1997) Influences of the Incremental Launching Construction Method on the Sizing of Prestressed Concrete Bridge Decks, Instn Civ. Engrs. Structs & Bldges, Vol.122, No.3, pp.316-325.
  2. Rosignoli, M. (1998) Nose Deck Interaction In Launched Prestressed Concrete Bridges, Bridge Engineering, Vol.3, No.1, pp.21-27. https://doi.org/10.1061/(ASCE)1084-0702(1998)3:1(21)
  3. Rosignoli, M. (1999) Presizing of Prestressed Concrete Launched Bridge, ACI Structural Journal, Vol.96, No.5 pp.705-710.
  4. 이환우, 정두희, 안태욱(2006) 변단면 압출추진코와 ILM 교량 상부단면의 상호작용 해석, 한국전산구조공학회논문집, 한국전산구조공학회 제19권, 제2호, pp.139-142. Lee, H.W., Jung, D.H., and Ahn, T.W. (2006) Interaction Analysis Between Tapered Sectional Launching Nose and Superstructure Section of ILM Concrete Bridge, J. Comput. Struct. Eng. Inst. Koerea, COSEI, Vol.19, No.2, pp. 139-142 (in Korean).
  5. Shojaei, A., Tajmir, H. and Haji Akbara Fini, S. (2014) Analysis of incrementally Launched Bridges: A Parametric Matrix Based Study, International Journal of Bridge Engineering, Vol.2, No.1, pp.17-42.
  6. 이환우, 장재엽(2010) 상부단면과의 상호작용을 고려한 ILM 교량용 압출추진코의 최적화 설계식, 한국전산구조공학회논문집, 한국전산구조공학회, 제23권, 제1호, pp. 53-60. Lee, H.W. and Jang, J.Y. (2010) Design Formula for Launching Nose of ILM Bridge Considering the Interaction Behavior with Superturecture Sections, J. Comput. Struct. Eng. Inst. Koerea, COSEIK, Vol.23, No.1, pp.53-60 (in Korean).
  7. 최항용, 서석구, 오명석, 오세환, 김희성(2007) 이중합성 연속 박스거더교에 대한 가설공법별 발생 단면력 검토, 한국강구조학회논문집, 한국강구조학회, 제19권, 제6호, pp. 681-693. Choi, H.Y., Suh, S.K., Oh, M.S., Oh, S.H., and Kim, H.S. (2007) Temporary Stresses by Applying Construction Methods for Continuous Steel-Concrete Double Composite Box Girder Bridges, Journal of Korean Society of Steel Construction, KSSC, Vol.19, No.6, pp.681-693 (in Korean).
  8. 최항용, 서석구, 오명석, 오세환(2008) 압출가설시 발생하는 휨모멘트의 최소화 조건을 통한 압출노즈의 최적설계, 대한토목학회논문집, 대한토목학회, 제28권, 제4A호, pp. 487-495. Choi, H.Y., Suh, S.K., Oh, M.S., and Oh, S.H. (2007) Techniques of Optimizing the Launching Nose under Conditions of Minimizing the Launching Bending Moment, Journal of the Korean Society of Civil Engineers, KSCE, Vol.28, No.4A, pp.487-495 (in Korean).

Cited by

  1. Optimizing Double Launching Noses for Incrementally Launched Equal-Span Continuous Girder Bridges vol.26, pp.7, 2021, https://doi.org/10.1061/(asce)be.1943-5592.0001746