DOI QR코드

DOI QR Code

Fresh and hardened properties of concrete incorporating ground granulated blast furnace slag-A review

  • 투고 : 2016.12.22
  • 심사 : 2017.01.13
  • 발행 : 2016.12.25

초록

Several types of industrial byproducts are generated. With increased environmental awareness and its potential hazardous effects, the utilization of industrial byproducts in concrete has become an attractive alternative to their disposal. One such by-product is ground granulated blast furnace slag (GGBS), which is a byproduct of the smelting process carried out in the iron and steel industry. The GGBS is very effective in the design and development of high-strength and high-performance concrete. This paper reviews the effect of GGBS on the workability, porosity, compressive strength, splitting tensile strength, and flexural strength of concrete.

키워드

참고문헌

  1. Arabi, N. and Jauberthie, R. (2012), "Calcium silicate materials: Substitution of hydrated lime by ground granulated blast furnace slag in autoclaving conditions", J. Mater. Civil Eng., 24(9), 1230-1236. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000480
  2. Atis, C.D. and Bilim, C. (2007), "Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag", Build. Environ., 42(8), 3060-3065. https://doi.org/10.1016/j.buildenv.2006.07.027
  3. Bagheri, A.R., Zanganeh, H. and Moalemi, M.M. (2012), "Mechanical and durability properties of ternary concretes containing silica fume and low reactivity blast furnace slag", Cement Concrete Compos., 34(5), 663-670. https://doi.org/10.1016/j.cemconcomp.2012.01.007
  4. Bagheri, A. and Nazari, A. (2014), "Compressive strength of high strength class c fly ash-based geopolymers with reactive granulated blast furnace slag aggregates designed by Taguchi method", Mater. Des., 54, 483-490. https://doi.org/10.1016/j.matdes.2013.07.035
  5. Bernal, S.A., De Gutierrez, R.M. and Provis, J.L. (2012), "Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends", Constr. Build. Mater., 33, 99-108. https://doi.org/10.1016/j.conbuildmat.2012.01.017
  6. Binici, H., Aksogan, O., Gorur, E.B., Kaplan, H. and Bodur, M.N. (2008), "Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack", Constr. Build. Mater., 22(7), 1515-1526. https://doi.org/10.1016/j.conbuildmat.2007.03.024
  7. Binici, H., Durgun, M.Y., Rizaoglu, T. and Kolucolak, M. (2012), "Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates", Sci. Iran., 19(3), 366-372. https://doi.org/10.1016/j.scient.2012.04.007
  8. Cheng, A., Huang, R., Wu, J.K. and Chen, C.H. (2005), "Influence of GGBS on durability and corrosion behavior of reinforced concrete", Mater. Chem. Phys., 93(2), 404-411. https://doi.org/10.1016/j.matchemphys.2005.03.043
  9. Choi, S.J., Kim, S.H., Lee, S.J., Won, R. and Won, J.P. (2013), "Mix proportion of eco-friendly fireproof high-strength concrete", Constr. Build. Mater., 38, 181-187. https://doi.org/10.1016/j.conbuildmat.2012.07.103
  10. Deb, P.S., Nath, P. and Sarker, P.K. (2014), "The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature", Mater. Des., 62, 32-39. https://doi.org/10.1016/j.matdes.2014.05.001
  11. Deboucha, W., Oudjit, M.N., Bouzid, A. and Belagraa, L. (2015), "Effect of incorporating blast furnace slag and natural pozzolana on compressive strength and capillary water absorption of concrete", Proc. Eng., 108, 254-261. https://doi.org/10.1016/j.proeng.2015.06.145
  12. Dubey, A., Chandak, R. and Yadav, R.K. (2012), "Effect of blast furnace slag powder on compressive strength of concrete", J. Sci. Eng. Res., 3(8), I094-I098.
  13. Elahi, A., Basheer, P.A.M., Nanukuttan, S.V. and Khan, Q.U.Z. (2010), "Mechanical and durability properties of high performance concretes containing supplementary cementitious materials", Constr. Build. Mater., 24(3), 292-299. https://doi.org/10.1016/j.conbuildmat.2009.08.045
  14. Guo, X. and Shi, H. (2012), "Utilization of steel slag powder as a combined admixture with ground granulated blast-furnace slag in cement based materials", J. Mater. Civil Eng., 25(12), 1990-1993.
  15. Hadjsadok, A., Kenai, S., Courard, L., Michel, F. and Khatib, J. (2012), "Durability of mortar and concretes containing slag with low hydraulic activity", Cement Concrete Compos., 34(5), 671-677. https://doi.org/10.1016/j.cemconcomp.2012.02.011
  16. Higgins, D.D. (2003), "Increased sulfate resistance of ggbs concrete in the presence of carbonate", Cement Concrete Compos., 25(8), 913-919. https://doi.org/10.1016/S0958-9465(03)00148-3
  17. Hiraskar, K.G. and Patil, C. (2013), "Use of blast furnace slag aggregate in concrete", J. Sci. Eng., 4, 95-98.
  18. Jau, W.C. and Tsay, D.S. (1998), "A study of the basic engineering properties of slag cement concrete and its resistance to seawater corrosion", Cement Concrete Res., 28(10), 1363-1371. https://doi.org/10.1016/S0008-8846(98)00117-3
  19. Khatib, J.M. and Hibbert, J.J. (2005), "Selected engineering properties of concrete incorporating slag and metakaolin", Constr. Build. Mater., 19(6), 460-472. https://doi.org/10.1016/j.conbuildmat.2004.07.017
  20. Konsta-Gdoutos, M.S. and Shah, S.P. (2003), "Hydration and properties of novel blended cements based on cement kiln dust and blast furnace slag", Cement Concrete Res., 33(8), 1269-1276. https://doi.org/10.1016/S0008-8846(03)00061-9
  21. Kuo, W.T., Wang, H.Y. and Shu, C.Y. (2014), "Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag", Constr. Build. Mater., 63, 189-196. https://doi.org/10.1016/j.conbuildmat.2014.04.017
  22. Li, J. and Yao, Y. (2001), "A study on creep and drying shrinkage of high performance concrete", Cement Concrete Res., 31(8), 1203-1206. https://doi.org/10.1016/S0008-8846(01)00539-7
  23. Lubeck, A., Gastaldini, A.L.G., Barin, D.S. and Siqueira, H.C. (2012), "Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag", Cement Concrete Compos., 34(3), 392-399. https://doi.org/10.1016/j.cemconcomp.2011.11.017
  24. Mosavinezhad, S.H.G. and Nabavi, S.E. (2012), "Effect of 30% ground granulated blast furnace, lead and zinc slags as sand replacements on the strength of concrete", KSCE J. Civil Eng., 16(6), 989-993. https://doi.org/10.1007/s12205-012-1240-2
  25. Nath, P. and Sarker, P.K. (2014), "Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition", Constr. Build. Mater., 66, 163-171. https://doi.org/10.1016/j.conbuildmat.2014.05.080
  26. Oner, A. and Akyuz, S. (2007), "An experimental study on optimum usage of GGBS for the compressive strength of concrete", Cement Concrete Compos., 29(6), 505-514. https://doi.org/10.1016/j.cemconcomp.2007.01.001
  27. Pathan, V.G., Grhutke, V.S. and Pathan, G. (2012), "Evaluation of concrete properties using ground granulated blast furnace slag", J. lnnov. Res. Sci. Eng. Technol., 1(1), 71-79.
  28. Pavia, S.A.R.A. and Condren, E. (2008), "Study of the durability of OPC versus GGBS concrete on exposure to silage effluent", J. Mater. Civil Eng., 20(4), 313-320. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:4(313)
  29. Shafigh, P., Jumaat, M.Z., Mahmud, H.B. and Alengaram, U.J. (2013), "Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag", Constr. Build. Mater., 40, 231-238. https://doi.org/10.1016/j.conbuildmat.2012.10.007
  30. Shi, H.S., Xu, B.W. and Zhou, X.C. (2009), "Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete", Constr. Build. Mater., 23(5), 1980-1985. https://doi.org/10.1016/j.conbuildmat.2008.08.021
  31. Siddique, R. and Kaur, D. (2012), "Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures", J. Adv. Res., 3(1), 45-51. https://doi.org/10.1016/j.jare.2011.03.004
  32. Teng, S., Lim, T.Y.D. and Divsholi, B.S. (2013), "Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag", Constr. Build. Mater., 40, 875-881. https://doi.org/10.1016/j.conbuildmat.2012.11.052
  33. Topcu, I.B. and Boga, A.R. (2010), "Effect of ground granulate blast-furnace slag on corrosion performance of steel embedded in concrete", Mater. Des., 31(7), 3358-3365. https://doi.org/10.1016/j.matdes.2010.01.057
  34. Ujhelyi, J.E. and Ibrahim, A.J. (1991), "Hot weather concreting with hydraulic additives", Cement Concrete Res., 21(2), 345-354. https://doi.org/10.1016/0008-8846(91)90015-A
  35. Wainwright, P.J. and Rey, N. (2000), "The influence of ground granulated blastfurnace slag (GGBS) additions and time delay on the bleeding of concrete", Cement Concrete Compos., 22(4), 253-257. https://doi.org/10.1016/S0958-9465(00)00024-X
  36. Wang, H.Y. and Lin, C.C. (2013), "A study of fresh and engineering properties of self-compacting high slag concrete (SCHSC)", Constr. Build. Mater., 42, 132-136. https://doi.org/10.1016/j.conbuildmat.2012.11.020
  37. Xu, H., Gong, W., Syltebo, L., Izzo, K., Lutze, W. and Pegg, I.L. (2014), "Effect of blast furnace slag grades on fly ash based geopolymer waste forms", Fuel, 133, 332-340. https://doi.org/10.1016/j.fuel.2014.05.018
  38. Yeau, K.Y. and Kim, E.K. (2005), "An experimental study on corrosion resistance of concrete with ground granulate blast-furnace slag", Cement Concrete Res., 35(7), 1391-1399. https://doi.org/10.1016/j.cemconres.2004.11.010
  39. Yuksel, I., Bilir, T. and Ozkan, O. (2007), "Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate", Build. Environ., 42(7), 2651-2659. https://doi.org/10.1016/j.buildenv.2006.07.003
  40. Yusuf, M.O., Johari, M.A.M., Ahmad, Z.A. and Maslehuddin, M. (2014), "Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag", Constr. Build. Mater., 52, 504-510. https://doi.org/10.1016/j.conbuildmat.2013.11.012

피인용 문헌

  1. Durability of self compacted concrete containing slag in hot climate vol.5, pp.3, 2017, https://doi.org/10.12989/acc.2017.5.3.271
  2. Permeability and mechanical properties of binary and ternary cementitious mixtures vol.5, pp.5, 2016, https://doi.org/10.12989/acc.2017.5.5.423
  3. Properties of concrete incorporating granulated blast furnace slag as fine aggregate vol.5, pp.5, 2017, https://doi.org/10.12989/acc.2017.5.5.437
  4. Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag vol.6, pp.2, 2016, https://doi.org/10.12989/acc.2018.6.2.103
  5. Copper or ferrous slag as substitutes for fine aggregates in concrete vol.6, pp.5, 2016, https://doi.org/10.12989/acc.2018.6.5.545
  6. Effect of ground granulated blast furnace slag on time-dependent tensile strength of concrete vol.23, pp.2, 2016, https://doi.org/10.12989/cac.2019.23.2.133
  7. Strength and abrasion resistance of roller compacted concrete incorporating GGBS and two types of coarse aggregates vol.8, pp.2, 2019, https://doi.org/10.12989/acc.2019.8.2.127
  8. Assessment of concrete properties with iron slag as a fine aggregate replacement vol.9, pp.6, 2016, https://doi.org/10.12989/acc.2020.9.6.589
  9. Green Concrete for a Circular Economy: A Review on Sustainability, Durability, and Structural Properties vol.14, pp.2, 2021, https://doi.org/10.3390/ma14020351