DOI QR코드

DOI QR Code

Fracture behavior and pore structure of concrete with metakaolin

  • 투고 : 2016.04.13
  • 심사 : 2016.10.15
  • 발행 : 2016.06.25

초록

Metakaolin, a dehydroxylated product of the mineral kaolinite, is one of the most valuable admixtures for high-performance concrete applications, including constructing reinforced concrete bridges and impact- and fire-resistant structures. Concretes produced using metakaolin become more homogeneous and denser compared to normal-strength concrete. Yet, these changes cause a change of volume throughout hardening, and increase the brittleness of hardened concrete significantly. In order to examine how the use of metakaolin affects the fracture and mechanical behavior of high-performance concrete we produced concretes using a range of water to binder ratio (0.42, 0.35 and 0.28) at three different weight fractions of metakaolin replacement (8%, 16% and 24%). The results showed that the rigidity of concretes increased with using 8% and 16% metakaolin, while it decreased in all series with 24% of metakaolin replacement. Similar effect has also been observed for other mechanical properties. While the peak loads in load-displacement curves of concretes decreased significantly with increasing water to binder ratio, this effect have been found to be diminished by using metakaolin. Pore structure analysis through mercury intrusion porosimetry test showed that the addition of metakaolin decreased the critical pore size of paste phases of concrete, and increasing the amount of metakaolin reduced the total porosity for the specimens with low water to binder ratios in particular. To determine the optimal values of water to binder ratio and metakaolin content in producing high-strength and high-performance concrete we applied a multi-objective optimization, where several responses were simultaneously assessed to find the best solution for each parameter.

키워드

과제정보

연구 과제 주관 기관 : TUBITAK (The Scientific & Technical Research Council of Turkey)

참고문헌

  1. Abdul Razak, H. and Wong, H.S. (2005), "Strength estimation model for high-strength concrete incorporating metakaolin and silica fume", Cement Concrete Res., 35(4), 688-695. https://doi.org/10.1016/j.cemconres.2004.05.040
  2. Akcay, B. and Tasdemir, M.A. (2009), "Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete", Constr. Build. Mater., 23(1), 353-363. https://doi.org/10.1016/j.conbuildmat.2007.11.015
  3. Akcay, B. and Tasdemir, M.A. (2015), "Investigation of microstructure properties and early age behavior of cementitious materials containing metakaolin", Proceedings of the 10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures (CONCREEP 10), Vienna, 2015 (Hellmich C, Kolleger J and Pichler B (eds)), pp 1468-1475.
  4. Asbridge, A.H., Walters, G.V. and Jones, T.R. (1994), "Ternary blended concretes OPC/ggbfs/metakaolin", Concrete Across Borders Denmark, 941-947.
  5. Badogiannis, E., Kakali, G., Dimopoulou, G., Chaniotakis, E. and Tsivilis, S. (2005), "Metakaolin as a main cement constituent. Exploitation of poor Greek kaolins", Cement Concrete Compos., 27(2), 197-203. https://doi.org/10.1016/j.cemconcomp.2004.02.007
  6. Badogiannis, E., Papadakis, V.G., Chaniotakis, E. and Tsivilis, S. (2004), "Exploitation of poor Greek kaolins: strength development of metakaolin concrete and evaluation by means of k-value", Cement Concrete Res., 34(6), 1035-1041. https://doi.org/10.1016/j.cemconres.2003.11.014
  7. Brooks, J.J. and Megat Johari, M.A. (2001), "Effect of metakaolin on creep and shrinkage of concrete", Cement Concrete Compos., 23(6), 495-502. https://doi.org/10.1016/S0958-9465(00)00095-0
  8. Brooks, J.J., Megat Johari, M.A. and Mazloom, M. (2000), "Effect of admixtures on the setting times of high-strength concrete", Cement Concrete Compos., 22(4), 293-301. https://doi.org/10.1016/S0958-9465(00)00025-1
  9. Caldarone, M.A., Gruber, K.A. and Burg, R.G. (1994), "High reactivity metakaolin (HRM): a new generation mineral admixture for high performance concrete", Concrete Int., 16(11), 37-40.
  10. Cassagnabere, F., Mouret, M., Escadeillas, G., Broilliard, P. and Bertrand, A. (2010), "Metakaolin, a solution for the precast industry to limit the clinker content in concrete: Mechanical aspects", Constr. Build. Mater., 24(7), 1109-1118. https://doi.org/10.1016/j.conbuildmat.2009.12.032
  11. Courard, L., Darimont, A., Schouterden, M., Ferauche, F., Willem, X. and Degeimbre R. (2003), "Durability of mortars modified with metakaolin", Cement Concrete Res., 33(9), 1473-1479. https://doi.org/10.1016/S0008-8846(03)00090-5
  12. Curcio, F., DeAngelis, B.A. and Pagliolico, S. (1998), "Metakaolin as a pozzolanic microfiller for high-performance mortars", Cement Concrete Res., 28(6), 803-809. https://doi.org/10.1016/S0008-8846(98)00045-3
  13. Derringer, G. and Suich, R. (1980), "Simultaneous optimization of several response variables", J. Qual. Tech., 12(4), 214-219. https://doi.org/10.1080/00224065.1980.11980968
  14. Ding, J.T. and Li, Z. (2002), "Effects of metakaolin and silica fume on properties of concrete", ACI Mater. J., 99(4), 393-398.
  15. Duan, P., Shui, Z., Chen, W. and Shen, C. (2013), "Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete", Constr. Build. Mater., 44, 1-6. https://doi.org/10.1016/j.conbuildmat.2013.02.075
  16. Dubey, A. and Banthia, N. (1998), "Influence of high-reactivity metakaolin and silica fume on the flexural toughness of high-performance steel fiber-reinforced concrete", ACI Mater. J., 95(3), 284-292.
  17. Frias, M. and Cabrera, J. (2001), "Influence of MK on the reaction in MK/lime and MK-blended cement systems at $20^{\circ}C$", Cement Concrete Res., 31(4), 519-527. https://doi.org/10.1016/S0008-8846(00)00465-8
  18. Frias, M., Sanches de Rojas, M.I. and Cabrera, J. (2000), "The effect that the pozzolanic reaction of metakaolin has on the heat evaluation in metakaolin-cement mortars", Cement Concrete Res., 30(2), 209-216. https://doi.org/10.1016/S0008-8846(99)00231-8
  19. Guneyisi, E., Gesoglu, M. and Mermerdas, K. (2008), "Improving strength, drying shrinkage, and pore structure of concrete using metakaolin", Mater. Struct., 41(5), 937-949. https://doi.org/10.1617/s11527-007-9296-z
  20. Guneyisi, E., Gesoglu, M., Algin, Z. and Mermerdas, K. (2014), "Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method", Compos. Part B: Eng., 60, 707-715. https://doi.org/10.1016/j.compositesb.2014.01.017
  21. Hassan, A.A.A., Lachemi, M. and Hossain, K.M.A. (2012), "Effect of metakaolin and silica fume on the durability of self-consolidating concrete", Cement Concrete Compos., 34(6), 801-807. https://doi.org/10.1016/j.cemconcomp.2012.02.013
  22. Hillerborg, A., Modeer, M. and Peterson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6(6), 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
  23. Khatib, J.M., Sabir, B.B. and Wild, S. (1996), "Some properties of metakaolin paste and mortar", Proceedings of the International Congress, Concrete in the Service of Mankind-Concrete for Environmental Enhancement and Protection, Theme 6-Waste Materials and Alternative Product, University of Dundee (Dhir RK and Dyer DT (eds)) London E&FN Spon, pp. 637-644.
  24. Madandoust, R. and Mousavi, S.Y. (2012), "Fresh and hardened properties of self-compacting concrete containing metakaolin", Constr. Build. Mater., 35, 752-760. https://doi.org/10.1016/j.conbuildmat.2012.04.109
  25. Moukwa, M., Lewis, B.G., Shah, S.P. and Ouyang, C. (1993), "Effects of clays on fracture properties of cement-based materials", Cement Concrete Res., 23(3), 711-723. https://doi.org/10.1016/0008-8846(93)90022-2
  26. Murat, M. (1983), "Hydration reaction and hardening of calcined clays and related minerals", Cement Concrete Res., 13(2), 259-266. https://doi.org/10.1016/0008-8846(83)90109-6
  27. Poon, C.S., Kou, S.C. and Lam, L. (2006), "Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete", Constr. Build. Mater., 20(10), 858-865. https://doi.org/10.1016/j.conbuildmat.2005.07.001
  28. Qian, X. and Li, Z. (2001), "The relationships between stress and strain for high-performance concrete with metakaolin", Cement Concrete Res., 31(11), 1607-1611. https://doi.org/10.1016/S0008-8846(01)00612-3
  29. Ramezanianpour, A.A. and Bahrami Jovein, H. (2012), "Influence of metakaolin as supplementary cementing material on strength and durability of concretes", Constr. Build. Mater., 30, 470-479. https://doi.org/10.1016/j.conbuildmat.2011.12.050
  30. RILEM Technical Committee 50-FMC (1985), "Draft Recommendation: Determination of the fracture energy of mortar and concrete by means of three-point bend test on notched beams", Mater. Struct., 18(4), 287-291. https://doi.org/10.1007/BF02472918
  31. Sfikas, I.P., Badogiannis, E.G. and Trezos, K.G. (2014), "Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin", Constr. Build. Mater., 64, 121-129. https://doi.org/10.1016/j.conbuildmat.2014.04.048
  32. Siddique, R. and Klaus, J. (2009), "Influence of metakaolin on the properties of mortar and concrete: a review", Appl. Clay Sci., 43(3-4), 392-400. https://doi.org/10.1016/j.clay.2008.11.007
  33. Vejmelkova, S., Pavlikova, M., Keppert, M., Kersner, Z., Rovnanikova, P., Ondracek, M., Sedlmajer, M. and Cerny, R. (2010), "High performance concrete with Czech metakaolin: Experimental analysis of strength, toughness and durability characteristics", Constr. Build. Mater., 24(8), 1404-1411. https://doi.org/10.1016/j.conbuildmat.2010.01.017

피인용 문헌

  1. Effect of metakaolin on the properties of conventional and self compacting concrete vol.5, pp.1, 2017, https://doi.org/10.12989/acc.2017.5.1.31
  2. Durability properties of concrete containing metakaolin vol.6, pp.2, 2018, https://doi.org/10.12989/acc.2018.6.2.159
  3. Probabilistic seismic demand of isolated straight concrete girder highway bridges using fragility functions vol.7, pp.3, 2016, https://doi.org/10.12989/acc.2019.7.3.183
  4. Autogenous Shrinkage, Pozzolanic Activity and Mechanical Properties of Metakaolin Blended Cementitious Materials vol.23, pp.11, 2016, https://doi.org/10.1007/s12205-019-2401-3
  5. Influence of coarse aggregate properties on specific fracture energy of steel fiber reinforced self compacting concrete vol.9, pp.2, 2016, https://doi.org/10.12989/acc.2020.9.2.173
  6. Algorithms to measure carbonation depth in concrete structures sprayed with a phenolphthalein solution vol.9, pp.3, 2016, https://doi.org/10.12989/acc.2020.9.3.257
  7. Degradation reliability modeling of plain concrete for pavement under flexural fatigue loading vol.9, pp.5, 2020, https://doi.org/10.12989/acc.2020.9.5.469
  8. Nano Silica and Metakaolin Effects on the Behavior of Concrete Containing Rubber Crumbs vol.1, pp.3, 2016, https://doi.org/10.3390/civileng1030017