DOI QR코드

DOI QR Code

Study on the Physical Property of PTT/Tencel/Cotton MVS Blended Yarn for High Emotional Garment (I) - Physical property of blended yarn according to yarn structure -

고감성 PTT/Tencel/Cotton MVS 혼방사 패션소재의 물성에 관한 연구 (I) - 사 구조에 따른 혼방사 물성 -

  • Received : 2015.10.05
  • Accepted : 2016.01.10
  • Published : 2016.02.28

Abstract

The evolution of spinning technology was focused on improving productivity with good quality of yarns. More detail spinning technology according to mixing of various kinds of fibre materials on the air vortex spinning system is required for obtaining good quality yarns. This paper investigated the physical properties of air vortex yarns compared with ring and compact yarns using PTT/tencel/cotton fibres. It was observed that unevenness of air vortex yarns was higher than those of ring and compact yarns, which resulted in low tenacity and breaking strain of air vortex yarns. Initial modulus of air vortex yarns was higher than those of ring and compact yarns. Yarn imperfections of air vortex yarns such as thin, thick and nep were much more than those of ring and compact yarns. These poor yarn qualities of air vortex yarn were attributed to the fasciated yarn structure with parallel fibres in the core part of the air vortex yarn. However, yarn hairiness of air vortex yarns was less and shorter than those of ring and compact yarns. Thermal shrinkage of air vortex yarns were higher than that of ring yarns, which was caused by sensible thermal shrinkage of PTT fibres on the bulky yarn surface and core part of air vortex yarns.

Keywords

References

  1. Basal, G., & Oxenham, W. (2006). Effects of some process parameters on the structure and properties of vortex spun yarn. Textile Research Journal, 76(6), 492-499. doi:10.1177/0040517506064253
  2. Beceren, Y., & Nergis, B. U. (2008). Comparison of the effects of cotton yarns produced by new, modified and conventional spinning systems on yarn and knitted fabric performance. Textile Research Journal, 78(4), 297-303. doi:10.1177/0040517507084434
  3. Erdumlu, N., Ozipek, B., & Oztuna, A. (2009). Investigation of vortex spun yarn properties in comparison with conventional ring and open-end rotor spun yarns. Textile Research Journal, 79(7), 585-595. doi:10.1177/0040517508093590
  4. Seo, A. K., Takahashi, M., Nakajima, M., Matsuo, T., & Matsumoto, T. (2004). Structure and properties of MVS yarns in comparison with ring yarns and open-end rotor spun yarns. Textile Research Journal, 74(9), 819-826. doi:10.1177/004051750407400911
  5. Kilic, G. B., & Sular, V. (2012). Frictional properties of cotton-tencel yarns spun in different spinning systems. Textile Research Journal, 82(12), 755-765. doi:10.1177/0040517511429610
  6. Kilic, M., & Okur, A. (2011). The properties of cotton-tencel and cotton promodal blended yarns spun in different spinning systems. Textile Research Journal, 81(2), 156-172. doi:10.1177/0040517510377828
  7. Lee, D. H., Choi, G. L., Na, M. H., & Cha, H. C. (2012). Mechanical properties of PET/PTT/Rayon staple blended fabrics. Textile Science and Engineering, 49(2), 126-132. doi:10.12772/TSE.2012.49.2.126
  8. Li, Q., Brady, P. R., Hurren, C. J., & Wang, X. G. (2008). The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns. Journal of the Textile Institute, 99(6), 561-568. doi:10.1080/00405000701692411
  9. Ortlek, H. G., & Ulku, S. (2005). Effect of some variables on properties of 100% cotton vortex spun yarn. Journal of the Textile Institute, 75(6), 458-461. doi:10.1177/0040517505053835
  10. Unal, P. G. (2010). Investigation of some handle properties of fabrics woven with two folded yarns of different spinning systems. Journal of the Textile Institute, 80(19), 2007-2015. doi:10.1177/0040517510369410
  11. Zhao, L., Hu, H., & Wang, S. H. (2011). Fuzzy-integrative judgement on the end-use performance of knitted fabrics made with polytrimethylene terephthalate blended yarns. Journal of the Textile Institute, 81(17), 1739-1747. doi:10.1177/0040517511410103