한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제19권1호
  • /
  • Pages.35-42
  • /
  • 2016
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

항공기 시스템 레벨 열관리 기술개발 동향

The Trend of System Level Thermal Management Technology Development for Aero-Vehicles

  • Kim, Youngjin (Department of Mechanical Engineering, Pusan National University) ;
  • Son, Changmin (Department of Mechanical Engineering, Pusan National University)
  • 투고 : 2015.09.16
  • 심사 : 2016.01.15
  • 발행 : 2016.02.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Modern aircraft is facing the increase of power demands and thermal challenges. In accordance with the application of more electric technology and advanced mission requirement, aircraft system requires increase of power generation and it cause increase of internal heat generation. Simultaneously, restrictions have significantly been imposed to the thermal management system. Modern aircraft must maintain low radar observability and infra-red signature. In addition, new composite aircraft skins have reduced the amount of heat that can be rejected to the environment. The combination of these characteristics has increased the challenges faced by thermal management. In order to mitigate the thermal challenges, the concept of system level thermal management should be applied and new modeling and simulation tools need to be developed. To develop and utilize system level thermal management technology, three key points are considered. Firstly, the performance changes of subsystems and components must be assessed at an integrated thermal system. It is because that each subsystem and component interacts with other subsystems or components and it can directly effects on overall system performance. Secondly, system level thermal management requirements and solutions must be evaluated early in conceptual design process as vehicle and propulsion system configuration decisions are being made. Finally, new component level thermal management technologies must focus on reducing heat generation and increasing the availability of heat sinks.

키워드

참고문헌

  1. Rory A. Roberts, Scott M. Eastbourn, "Generic Aircraft Thermal Tip-to-Tail Modeling and Simulation," AIAA 2011-5971, 47th AIAA/ASME/ SAE/ASEE Joint Propulsion Conference & Exhibit, July, 2011.
  2. Rory A. Roberts, Daniel D. Decker, "Control Architecture Study Focused on Energy Savings of an Aircraft Thermal Management System," GT2013-95922, Proceedings of ASME Turbo Expo 2013, June, 2013. https://doi.org/10.1115/GT2013-95922
  3. Rory A. Roberts, Scott M. Eastbourn, "Vehicle Level Tip-to-Tail Modeling of an Aircraft," International Journal of Thermodynamics, Vol. 17, No. 2, pp. 107-115, 2014.
  4. Mitch Wolff, "Hardware in the Loop - Aircraft Electric Laboratory," RTO-MP-AVT-178-23, Specialists' Meeting, 2010.
  5. Werner J. A. Dahm "Future Requirements for Thermal Management: Applications and Challenges on the Horizon," Thermal Science & Materials Workshop, August, 2011.
  6. Mitch Wolff, "INVENT "Tip-to-Tail" Energy/Engine /Power/Thermal Modeling, Simulation, & Analysis (MS&A)," 5th Annual Research Consortium for Multidisciplinary System Design Workshop, June, 2010.
  7. Mark Bodie, Greg Russell, Kevin McCarthy, Eric Lucus, "Thermal Analysis of an Integrated Aircraft Model," AIAA 2010-288, 48th AIAA Aerospace Sciences Meeting, January, 2010.
  8. Eric A. Walters, Steve Iden, "INVENT Modeling, Simulation, Analysis and Optimization," AIAA 2010-287, 48th AIAA Aerospace Sciences Meeting, January, 2010.
  9. https://www.cso.nato.int/abstracts, NATO Science & Technology Organization Scientific Publications
  10. http://www.crescendo-fp7.eu/, Collaborative and Robust Engineering using Simulation Capability Enabling Next Design Optimisation
  11. Mitch Wolff, "Integrated Thermal/Power/Propulsion/Vehicle Modeling Issues Related to a More Electric Aircraft Architecture," RTO-MP-AVT-178-28, Specialists Meeting, 2010.
  12. Mark Bodie, Mitch Wolff, "Robust Optimization of an Aircraft Power Thermal Management System," AIAA 2010-7086, 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, July, 2010.
  13. Youngjoon Yoo, Hyungju Lee, Seongki Min, Kiyoung Hwang, Jinshik Lim, "A Study on a Modeling and Simulation Program of an Environmental Control System with a Phase Change Heat Exchanger," AIAA 2011-6675, AIAA Modeling and Simulation Technologies Conference, August, 2011.
  14. Ricardo Gandolfi, Luiz Felipe Pellegrini, Silvio de Oliveira Jr., "More Electric Aircraft Analysis Using Exergy as a Design Comparison Tool," AIAA 2010-809, 48th AIAA Aerospace Sciences Meeting, August, 2011.
  15. Adam C. Maser, Elena Garcia, and Dimitri N. Mavris, "Thermal Management Modeling for Integrated Power Systems in a Transient, Multidisciplinary Environment," AIAA 2009-5505, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, August, 2009.
  16. Craig P. Lawson, James. M. Pointon, "Thermal Management of Electromechanical Actuation on an All-Electric Aircraft," ICAS 2008, 26th International Congress of the Aeronautical Sciences, 2008.
  17. David A. Woodburn, Thomas Wu, Louis Chow, Quinn Leland, Wendell Brokaw, Jared Bindl, Nicholas Rolinski, Lei Zhou, Yeong-Ren Lin, and Brett Jordan, "Dynamic Heat Generation Modeling of High Performance Electromechanical Actuator," AIAA 2010-290, 48th AIAA Aerospace Science Meeting Including the New Horizons Forum and Aerospace Exposition, January, 2010.
  18. Rui Zhou, Neil Garrigan, Kevin Leamy, Tom Tucker, "Modeling, Simulation and Preliminary Design Integration for Vehicle Level Energy Systems," RTO-MP-AVT-178-07, Specialists' Meeting, 2010.