DOI QR코드

DOI QR Code

Analytical model of expansion for electric arc furnace oxidizing slag-containing concrete

  • Shu, Chun-Ya (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Kuo, Wen-Ten (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Juang, Chuen-Ul (Department of Civil Engineering, National Kaohsiung University of Applied Sciences)
  • 투고 : 2016.03.31
  • 심사 : 2016.06.18
  • 발행 : 2016.11.25

초록

This study applied autoclave expansion and heat curing to accelerate the hydration of concrete and investigated how these methods affect the expansion rate, crack pattern, aggregate size effect, and expansion of electric arc furnace oxidizing slag (EOS)-containing concrete. An expansion prediction model was simulated to estimate the expansion behavior over a long period and to establish usage guidelines for EOS aggregates. The results showed that the EOS content in concrete should range between 20% and 30% depending on the construction conditions, and that coarse aggregates with a diameter of ${\geq}4.75-mm$ are not applicable to construction engineering. By comparison, aggregates with a size of 1.18-0.03 mm resulted in higher expansion rates; these aggregates can be used depending on the construction conditions. On Day 21, the prediction model attained a coefficient of determination ($R^2$) of at least 0.9.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science and Technology of Taiwan

참고문헌

  1. ASTM C1260 (2014), "Standard test method for potential Alkali reactivity of aggregates (Mortar-Bar Method)".
  2. ASTM C1293 (2015), "Standard test method for determination of length change of concrete due to Alkali-Silica reaction".
  3. ASTM C150 (2016), "Standard specification for Portland cement".
  4. ASTM C151 (2015), "Standard test method for autoclave expansion of Portland cement".
  5. ASTM C33 (2016), "Standard specification for concrete aggregates".
  6. Deshpande, N., Londhe, S. and Kulkarni, S.S. (2013), "Modelling compressive strength of recycled aggregate concrete using neural networks and regression", Con. Res. Let., 4 (2), 580-590.
  7. Kawamura, M., Takomoto, K. and Hasaba, S. (1983), "Application of quantitative EDXA analysis and micro hardness measurements to the study of alkali-silica reaction mechanisms", Proceedings 6th Int. Conf. Danish Concrete Association, 167-174 (Copenhagen).
  8. Kelham, S. (1996), "The effect of cement composition and fineness on expansion associated with delayed ettringite formation", Cem. Concrete Compos., 18(3), 171-179. https://doi.org/10.1016/0958-9465(95)00013-5
  9. Khan, S.U., Ayub, T. and Rafeeqi, S.F.A. (2013), "Prediction of compressive strength of plain concrete confined with ferrocement using Artificial Neural Network (ANN) and comparison with existing mathematical models", Am. J. Civ. Eng. Arch., 1(1), 7-14. https://doi.org/10.12691/ajcea-1-1-2
  10. Kuo, W.T. and Shu, C.Y. (2014), "Application of high-temperature rapid catalytic technology to forecast the volumetric stability behavior of containing steel slag mixtures", Constr. Build. Mater., 50(15), 463-470. https://doi.org/10.1016/j.conbuildmat.2013.09.030
  11. Kuo, W.T. and Shu, C.Y. (2015), "Effect of particle size and curing temperature on expansion reaction in electric arc furnace oxidizing slag aggregate concrete", Constr. Build. Mater., 94 (30), 488-493. https://doi.org/10.1016/j.conbuildmat.2015.07.019
  12. Kuo, W.T. and Shu, C.Y. (2015), "Expansion behavior of low-strength steel slag mortar during hightemperature catalysis", Comput. Concrete, 16(2), 261-274. https://doi.org/10.12989/cac.2015.16.2.261
  13. Kuo, W.T., Shu, C.Y. and Han, Y.W. (2014), "Electric arc furnace oxidizing slag mortar with volume stability for rapid detection", Constr. Build. Mater., 53(28), 635-641. https://doi.org/10.1016/j.conbuildmat.2013.12.023
  14. Lan, L.H. and Guo, W.Q. (2007), "Treatment of cement with un-certificated stability and stability test of concrete", Shanxi Arch., 33(34), 165-166.
  15. Lin, C.M., Chen, C.H., Li, C.C., Chang, K.L. and Wu, W. (2015), "The study of dephosphorization and desulfurization during steelmaking using the recycling refining slag of activation", Min. Metall., 59(1), 101-110.
  16. Liu, J., Li, H. and He, C. (2011), "Predicting the compressive strength of concrete using rebound method and artificial neural network", ICIC. Express. Let., 5(4), 1115-1120.
  17. Puertas, F., Garcia-Diaz, I., Barba, A., Gazulla, M.F., Palacios, M., Gomez, M.P. and Martinez-Ramirez, S. (2008), "Ceramic wastes as alternative raw materials for Portland cement clinker production", Cement Concrete Compos., 30(9), 798-805. https://doi.org/10.1016/j.cemconcomp.2008.06.003
  18. Ramyar, K., Topal, A. and Andi, O. (2005), "Effects of aggregate size and angularity on alkali-silica reaction", Cement Concrete Res., 35(11), 2165-2169. https://doi.org/10.1016/j.cemconres.2005.03.010
  19. Saccani, A. and Bignozzi, M.C. (2010), "ASR expansion behavior of recycled glass fine aggregates in concrete", Cement Concrete Res., 40(4), 531-536. https://doi.org/10.1016/j.cemconres.2009.09.003
  20. Shi, J.P. and Li, X. (2010), "Build 28d compressive strength forecasting equation by curve fitting", Cement Eng., 4, 77-78.
  21. Shu, C.Y. and Kuo, W.T. (2015), "Expansion behavior of concrete containing different steel slag aggregate sizes under heat curing", Comput. Concrete, 16(3), 487-502. https://doi.org/10.12989/cac.2015.16.3.487
  22. Tavakoli, H.R., Omran, O.L., Shiade, M.F. and Kutanaei, S.S. (2014), "Prediction of combined effects of fibers and nanosilica on the mechanical properties of self-compacting concrete using artificial neural network", Latin Am. J. Solid. Struct., 11(11), 1906-1923. https://doi.org/10.1590/S1679-78252014001100002
  23. US Federal Highway Administration, Rec. Mater. Highway. Environ. available at http://www.tfhrc.gov/hnr20/recycle accessed on May 2 (2010).
  24. Wang, G. (2010), "Determination of the expansion force of coarse steel slag aggregate", Constr. Build. Mater., 24, 1961-1966. https://doi.org/10.1016/j.conbuildmat.2010.04.004
  25. Wang, G., Wang, Y. and Gao, Z. (2010), "Use of steel slag as a granular material: volume expansion prediction and usability criteria", J. Hazard. Mater., 184(1), 555-560. https://doi.org/10.1016/j.jhazmat.2010.08.071
  26. Wang, W.C. (2014), "Feasibility of stabilizing expanding property of furnace slag by autoclave method", Constr. Build. Mater., 68, 552-557. https://doi.org/10.1016/j.conbuildmat.2014.06.082
  27. Yin, L.Q. and Xie, L. (2007), "The application study of circulating fluidized bed boiler slag", Elect. P. Environ. Protect., 23(6), 60-62.
  28. Yu, S.K. (2011), "ASR expansion behavior of recycling waste fine aggregates in concrete", Master. Degree. Thesis., National Central University, Zhongli (in Chinese).
  29. Zhang, Q.J. and Deng, M. (2009), "Review on the expansion mechanism of cement paste mixed with Mgotype expansion agent", College of Mater. Sci. Eng., Nanjing Uni. Tech., 111-115 (in Chinese).

피인용 문헌

  1. Prediction of expansion of electric arc furnace oxidizing slag mortar using MNLR and BPN vol.20, pp.1, 2016, https://doi.org/10.12989/cac.2017.20.1.111
  2. Properties of concrete incorporating granulated blast furnace slag as fine aggregate vol.5, pp.5, 2017, https://doi.org/10.12989/acc.2017.5.5.437
  3. Feasibility and Characterization Mortar Blended with High-Amount Basic Oxygen Furnace Slag vol.12, pp.1, 2016, https://doi.org/10.3390/ma12010006
  4. Research Progress on Skid Resistance of Basic Oxygen Furnace (BOF) Slag Asphalt Mixtures vol.13, pp.9, 2020, https://doi.org/10.3390/ma13092169
  5. Expansion inhibition of steel slag in asphalt mixture by a surface water isolation structure vol.21, pp.8, 2016, https://doi.org/10.1080/14680629.2019.1601588