DOI QR코드

DOI QR Code

Cyclic Lateral Loading Test for Cast-In-Place Concrete-Filled Hollow PC Columns Using Permanent Inner form

영구 내부거푸집을 이용한 현장타설 콘크리트 채움중공 PC기둥의 반복횡가력실험

  • Lee, Ho-Jun (Dept. of Architecture & Architectural Engineering, Seoul National University) ;
  • Park, Hong-Gun (Dept. of Architecture & Architectural Engineering, Seoul National University) ;
  • Kim, Chang-Soo (School of Civil Engineering, Shandong Jianzhu University) ;
  • Hwang, Hyeon-Jong (College of Civil Engineering, Hunan University)
  • Received : 2015.02.02
  • Accepted : 2016.01.06
  • Published : 2016.04.30

Abstract

Cast-in-place concrete-filled hollow PC (HPC) columns are used to reduce lifting load of heavy-weight PC columns and to improve the structural integrity of joints. In the present study, a new type of HPC column was proposed to improve the productivity and structural integrity of the concrete. To form the hollow PC columns, a permanent inner form was prefabricated using structural deck plates and penetrated lateral bars. Half-scale specimens of four HPC columns were tested under combined axial compression and lateral cyclic loading to evaluate the seismic resistance. In the design of test specimens, various parameters such as the spacing of lateral re-bars, the use of steel fiber, and the thickness of PC cover were considered. The test results showed that the proposed HPC columns generally exhibited satisfactory load-carrying capacity and deformation capacity without brittle failure of PC. If closely spaced hoops or fiber reinforcements are used for PC, the deformation capacity can be improved further by restraining PC spalling.

대형 PC기둥의 양중부하를 줄이고 접합부의 구조일체성을 개선하기 위한 대안으로서, 중공 PC기둥이 사용될 수 있다. 본 연구에서는 PC부의 생산성과 구조일체성을 개선한 새로운 중공 PC기둥을 개발하였다. PC부를 제작하기 위하여 구조용 골형플레이트를 내부영구거푸집과 수평 관통철근을 사용하였다. 제안된 PC기둥의 내진성능을 검증하기 위하여, 1/2 스케일의 기둥 실험체 4개에 대하여 일정 축력에서 반복 횡가력실험을 수행하였다. 실험 변수로는 횡철근 간격, 강섬유 사용여부, 그리고 PC부의 두께가 고려되었다. 실험 결과, 제안된 PC기둥은 외곽 PC부의 취성적인 파괴 없이 우수한 하중재하능력과 변형능력을 보이는 것으로 나타났다. PC부에 횡철근을 촘촘히 배근하거나 강섬유를 사용할 경우, PC 콘크리트의 탈락을 제한하여 변형능력을 증가시킬 수 있었다.

Keywords

References

  1. Kono, M., Sueoka, K., Uenishi, T., Funayama, Y., and Okihashi, T., "A Study of Outer-shell Precast Concrete Method: (Part 3) Hydraulic Pressure Experiment and Full-scale Construction Experiment", Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan, 1995, pp. 461-462 (in Japanese).
  2. Kajihara, S., Kuroshima, T., Nonogami, M., Uenishi, T. Kondoh, A., and Nitta, H., "Studies on R/C Columns using Precast Shell: (Part 2) Production of Precast Shell of Full-scale", Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan, 1999, pp.199-200 (in Japanese).
  3. Iso, K., Kubokura, T., Nagao, M., and Morimoto, T., "Research and Development on Construction Method of Outer-shell Precast Concrete Members with Sub Hoops made by Simplified Method", Journal of Architecture and Building Science, Vol.7, 1999, pp.17-22 (in Japanese).
  4. Hagiwara, Y., Yamaguchi, K., and Takami K., "Experiment of Test Production of Outer Shell Precast Concrete Column Members by Casting Method", Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan, 2001, pp. 333-334 (in Japanese).
  5. Sai, S., Kanno, K., Ohaga, Y., and Tanaka, R., "Research on the Compression Examination of Half Precast Columns using Recycled Aggregate Concrete", Summaries of Technical Papers of Annual Meeting Architectural Institute of Japan, 2005, pp. 799-800 (in Japanese).
  6. Xiao, J., Huang, X., and Shen, L., "Seismic Behavior of Semi-precast Column with Recycled Aggregate Concrete", Construction and Building Materials, Vol.35, 2012, pp.988-1001. https://doi.org/10.1016/j.conbuildmat.2012.04.062
  7. Choi, S.Y., Lee, J.Y., Jeong, G.H., Ryu, C., and Jung, B.W., "An Experimental Study on the Axial Strength of Centrifugally Formed Half-PC Columns", Journal of the Architectural Institute of Korea, Vol.20, No.2, 2000, pp.257-260 (in Korean).
  8. Seo, S.Y., Yoon, S.J., and Lee, W.J., "Evaluation of Structural Performance the Hollow PC Column Joint subjected to Cyclic Lateral Load", Journal of the Korea Concrete Institute, Vol.20, No.3, 2008, pp.335-343 (in Korean). https://doi.org/10.4334/JKCI.2008.20.3.335
  9. Lim, W.Y., Park, H.G., Oh, J.K., and Kim, C.S., "Seismic Resistance of Cast-In-Place Concrete-Filled Hollow PC Columns", Journal of the Korea Concrete Institute, Vol.26, No.1, 2014, pp.35-46 (in Korean). https://doi.org/10.4334/JKCI.2014.26.1.035
  10. ACI Committee 318, Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, 2011, p.503.
  11. Architectural Institute of Korea, Korea Building Code, 2009 (in Korean).
  12. ACI Committee 374, "Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary", ACI 374.1-05, American Concrete Institute, 2005, pp.1-9.
  13. Park, R., "State-of-the-Art Report on Ductility Evaluation from Laboratory and Analytical Testing", Proceedings of 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, Vol.8, pp.605-616.