The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristic Analysis and Test of IPMSM for e-4WD of the Hybrid Electric Vehicle

HEV용 e-4WD 구동을 위한 매입형 영구자석 동기전동기의 특성해석 및 시험

  • Jung, Soo-Jin (Dept. of Electrical Engineering, Hanyang University) ;
  • Lee, Ju (Dept. of Electrical Engineering, Hanyang University)
  • Received : 2015.11.16
  • Accepted : 2016.03.31
  • Published : 2016.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the performance design and analysis for an Interior Permanent-Magnet Synchronous Motor (IPMSM) that will be used as a traction motor in the e-4WD system of hybrid SUV(Sports Utility Vehicle) and RV(Recreational Vehicle), are investigated using finite element method. In order to improve the accuracy of design, the tolerances of parts and assemblies as well as the material properties of permanent magnet, stator, rotor and winding etc. are considered under the conditions similar to real driving state of motor. Both no load performance test and maximum load performance test, in which real driving state and cooling condition have been considered, are also implemented via proto sample build to verify the validity of motor's performance design.

Keywords

References

  1. T. J. E. Miller and J. R. Hendershot Jr.. "Design of Brushless Permanent-Magnet motors", New York : Oxford University Press Inc., 1994.
  2. M. Tursini, F. Parasiliti, G. Fabri, E. Della Loggia,. "A fault tolerant e-motor drive system for auxiliary services in hybrid electric light commercial vehicle", Electric Vehicle Conference(IEVC), 2014 IEEE International
  3. Yong-Kak Choi, Chul-Su Kim, Jong-Jin Park,. "A study of front & rear motor power distribution for E-4WD HEV", Proceeding of the KSAE Annual Autumn Conference, pp.1250-1256, 2004
  4. Si-Young Yun, Ju Lee,. "Implementation of In-wheel Motor Driving System for Electric Vehicle", KIEE Trans. Vol. 62, N0. 6, pp. 750-755, 2013
  5. Jung Gyo Kim, Ju Lee,. "Cogging Torque Reduction of Interior Permanent Magnet Motor Using Statistical Method", KIEE Trans. Vol. 55B, No. 6, JUN, 2006
  6. Geo-chul Jeong, Chan-Bae Park, Tae-chul Jeong, Ju Lee., "A study on the Characteristics Analysis According to the Permanent Magnet Segmentation Change to IPMSM for Urban Railway Vehicle", KIEE Trans. Vol. 64, No. 10, pp. 1486-1492, 2015
  7. Won-Ho Kim, Jae-Nam Bae, Ik-Sang Jang, Chang- Sung Jin, Ju Lee,. "Design of the Traction Motor for HMMWV", Proceeding of the KIEE Annual Summer Conference, July, 2010
  8. Jin-Hwan Lee, Dong-Hyuk Park, Gyeong-Jae Park, Yong-Jae Kim, Sang-Yong Jung,. "Analysis of Interior Permanent Magnet Synchronous Motor characteristics Using Fractional Slot", Proceeding of the KIEE Annual Summer Conference, July, 2013
  9. S.H Ahn, K.W Kim, G.H Rim, J.S Kim, H.J Ryoo,. "Provisions and Status of PHEV and EV", Proceeding of the KIEE Annual Summer Conference, July, 2009
  10. Han Cheol, Seok-Myeong Jang, Ji-Hwan Choi, Hyeon-Joon Park,. "Reduction method of core loss in permanent magnet motor with distributed winding", Proceeding of the KIEE Annual Autumn Conference, November, 2012
  11. Kan Jae Lee, "A Study on the Design of Interior Permanent Magnet Synchronous Motor for HEV", Ph.D Thesis, University of Hanyang, Seoul Korea, 2004
  12. Ki Chan Kim, "A Study on the Optimal Design and Control Performance of Interior Permanent Magnet Synchronous Motor for EV/HEV", Ph.D Thesis, University of Hanyang, Seoul Korea, 2008