DOI QR코드

DOI QR Code

Design of a Steel Structural Building Using Double Split Tee Connections without Shear Tabs

전단탭이 없는 상·하부 스플릿 티 접합부를 적용한 강구조물의 설계

  • Yang, Jae Guen (Department of Architectural Engineering, Inha University) ;
  • Kim, Yong Boem (Department of Architectural Engineering, Inha University)
  • Received : 2016.01.28
  • Accepted : 2016.03.28
  • Published : 2016.04.27

Abstract

Double split tee connection has various strength, stiffness, and energy dissipation capacity according to changes of thickness of T-stub flange and gauge distance, number, and diameter of high-strength bolt. If the double split tee connection is applied to a low- or medium-rise steel structure, a shear tab can't be applied for supporting shear force because of geometrical limitation. So it is required to propose details of improved double split tee connection to support shear force as well as flexural force. This research was performed to see if enough rotational stiffness is found when the double split tee connection without shear tab which was obtained through analytic and experimental researches by Yang et al. is applied to a low- or medium-rise steel structure. Also, it was seen if the low- or medium-rise steel structure having double split tee connection without shear tab has safe structural behavior, as well as material saving effect.

금상 하부 스플릿 티 접합부는 접합부를 구성하는 T-stub 플랜지의 두께, 고장력볼트의 게이지 거리, 고장력볼트의 개수 및 직경 등의 변화에 따라서 상이한 강도, 강성, 에너지소산능력 등을 발현한다. 이러한 상 하부 스플릿 티 접합부가 중 저층 강구조물에 적용될 경우에 전단력을 지탱하는 전단탭을 적용할 수 없는 상황이 발생한다. 이 때문에 충분한 휨모멘트지지능력뿐만 아니라 전단력도 지탱할 수 있는 개선된 상 하부 스플릿 티 접합부상세의 제안이 필요하다. 이 연구는 양재근 등이 해석적 연구와 실험적 연구를 수행하여 얻은 전단탭이 없는 상 하부 스플릿 티 접합부가 중 저층의 강구조물에 적용되었을 때 충분한 회전강성을 발현하는 가를 평가하기 위하여 진행하였다. 또한, 전단탭이 없는 상 하부 스플릿 티 접합부를 적용한 중 저층 강구조물이 안전한 구조적거동양상을 나타냄과 동시에 무차원화 된 초기 회전강성을 구조해석에 적용하여 재료적 물량저감 효과도 나타낼 수 있는 가를 평가하기 위하여 진행하였다.

Keywords

References

  1. 김희동, 양재근, 이재윤, 이형동(2014) 상. 하부 T-stub 접합부의 초기회전강성 평가, 한국강구조학회논문집, 한국강구조학회, 제26권, 제2호, pp.133-142. (Kim, H.D., Yang, J.G., Lee, J.Y., and Lee, H.D. (2014) Evaluation of the Initial Rotational Stiffness of a Double Split Tee Connection, International Journal of Steel Structures, KSSC, Vol.26, No.2, pp.133-142.)
  2. Faella, C., Piluso, V., and Rizzano, G. (2000) Structural Steel Semi-Rigid Connections: Theory, design, and software, CRC Press.
  3. 양재근, 최정환, 김현광, 박재호(2012) 무보강 상.하부 ㄱ형강 접합부의 소성휨모멘트 저항능력 예측을 위한 실험 및 해석적연구, 한국강구조학회논문집, 한국강구조학회, 제23권, 제5호, pp.547-555. (Yang, J.G., Choi, J.H., Kim, H.K., and Park, J.H. (2012) International Journal of Steel Structures, KSSC, Vol.23, No.5, pp.547-555.)
  4. FEMA-350 (2000) Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, prepared by the SAC Joint Venture for the Federal Emergency Management Agency, Washington DC.
  5. Piluso, V., Faella, C., and Rizzano, G. (2001) Ultimate Behavior of Bolted T-stubs. I : Theoretical Model, Journal of Structural Engineering, ASCE, Vol.127, No.6, pp. 686-693. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(686)
  6. Piluso, V., Faella, C., and Rizzano, G. (2001) Ultimate Behavior of Bolted T-stubs. II : Model Validation, Journal of Structural Engineering, ASCE, Vol.127, No.6, pp. 694-704. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(694)
  7. Swanson, J.A., Kokan, D.S., and Leon, R.T. (2002) Advanced Finite Element Modeling of Bolted T-stub Connection Components, Journal of Constructional Steel Research, Elsevier, Vol.58, No.5, pp.1015-1031. https://doi.org/10.1016/S0143-974X(01)00098-0
  8. Thornton, W.A. (1985) Prying Action: A General Treatment, Journal of Environmental Engineering, AISC, Vol.22, pp.67-75.
  9. 양재근, 이형동, 김용범, 배다솔(2015) 전단탭이 없는 상.하부 스플릿 티 접합부의 접합상세 제안, 한국강구조학회, KSSC, 제27권, 제5호, pp.423-433. (Yang, J.G., Lee, H.D., Kim, Y.B., and Pae, D.S. (2015) Proposal of Connection Details for a Double Splte Tee Connection Without a Shear tab, International Journal of Steel Structures, KSSC, Vol.27, No.5, pp.423-433.)
  10. Girao Coelho, A.M., Simoes da Silva, L., and Bijlaard, F.S.K. (2006) Finite-Element Modeling of the Nonlinear Behavior of Bolted T-stub Connections, Journal of Structural Engineering, ASCE, Vol.132, No.6, pp.918-928. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(918)
  11. Lemonis, M.E. and Gantes, C.J. (2006) Incremental Modeling of T-Stub Connections, Journal of Mechanics of Materials and Structures, Vol.1, No.7, pp.1135-1159. https://doi.org/10.2140/jomms.2006.1.1135
  12. Stankiewicz, B. (2002) Experimental Tests of T-stub Joints and Refined Finite Element Method Computer Model, EUROSTEEL 2002, Coimbra, Portugal.
  13. Richard, R.M., Hsia, W., and Chmielowiec, M. (1988) Derived Moment-Rotation Curve for Double-Framing Angles, Comput. & Struct, Elsevier Science Ltd., 3, pp.485-494