DOI QR코드

DOI QR Code

Impacts of Burnup-Dependent Swelling of Metallic Fuel on the Performance of a Compact Breed-and-Burn Fast Reactor

  • Hartanto, Donny (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Heo, Woong (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Chihyung (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Yonghee (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology)
  • Received : 2015.10.01
  • Accepted : 2015.12.13
  • Published : 2016.04.25

Abstract

The U-Zr or U-TRU-Zr cylindrical metallic fuel slug used in fast reactors is known to swell significantly and to grow during irradiation. In neutronics simulations of metallic-fueled fast reactors, it is assumed that the slug has swollen and contacted cladding, and the bonding sodium has been removed from the fuel region. In this research, a realistic burnup-dependent fuel-swelling simulation was performed using Monte Carlo code McCARD for a single-batch compact sodium-cooled breed-and-burn reactor by considering the fuel-swelling behavior reported from the irradiation test results in EBR-II. The impacts of the realistic burnup-dependent fuel swelling are identified in terms of the reactor neutronics performance, such as core lifetime, conversion ratio, axial power distribution, and local burnup distributions. It was found that axial fuel growth significantly deteriorated the neutron economy of a breed-and-burn reactor and consequently impaired its neutronics performance. The bonding sodium also impaired neutron economy, because it stayed longer in the blanket region until the fuel slug reached 2% burnup.

Keywords

References

  1. H. Sekimoto, K. Ryu, Y. Yoshimura, CANDLE: the new burnup strategy, Nucl. Sci. Eng. 139 (2001) 306-317. https://doi.org/10.13182/NSE01-01
  2. Tyler Ellis, Robert Petroski, Pavel Hejzlar, George Zimmerman, David McAlees, Charles Whitmer, Nicholas Touran, Jonatan Hejzlar, Kevan Weaver, Joshua C. Walter, Jon McWhirter, Charles Ahlfeld, Thomas Burke, Ash Odedra, Rod Hyde, John Gilleland, Yuki Ishikawa, Lowell Wood, Nathan Myhrvold, William H. Gates III, Traveling-wave reactors: a truly sustainable and full-scale resource for global energy needs, in: Proceedings of ICAPP 2010, San Diego (CA), 2010.
  3. E. Greenspan, F. Heidet, Energy sustainability and economic stability with breed-and-burn reactors, Prog. Nucl. Energ. 53 (2011) 794-799. https://doi.org/10.1016/j.pnucene.2011.05.002
  4. Taewoo Tak, Deokjung Lee, T.K. Kim, Design of ultralongcycle fast reactor employing breed-and-burn strategy, Nucl. Technol. 183 (2013) 427-435. https://doi.org/10.13182/NT13-A19430
  5. D. Hartanto, Y. Kim, A Compact Breed-and-burn Fast Reactor Using Spent Nuclear Fuel Blanket, Proceedings of PHYSOR 2012, Knoxville (TN), 2012.
  6. D. Hartanto, Y. Kim, Characterization of a Metallic-fuelled B&BR with Non-uniform Smear Density, Transactions of the Korean Nuclear Society Autumn Meeting 2012, Gyeongju (Korea), 2012.
  7. D. Hartanto, Y. Kim, Alternative reflectors for a compact sodium-cooled breed-and-burn fast reactor, Ann. Nucl. Energy 76 (2015) 113-124. https://doi.org/10.1016/j.anucene.2014.09.048
  8. G.L. Hofman, L.C. Walters, T.H. Bauer, Metallic fast reactor fuels, Prog. Nucl. Energ. 31 (1997) 83-110. https://doi.org/10.1016/0149-1970(96)00005-4
  9. R.G. Pahl, R.S. Wisner, M.C. Billone, and G.L. Hofman, Steadystate irradiation testing of U-Pu-Zr fuel to >18% burnup, Proceedings of the International Conference on Fast Reactor Safety IV, Snowbird, Utah, 12-16 August, 1990.
  10. H.J. Shim, C.H. Kim, McCARD user's manual, Version 1.1, Seoul National University, Seoul, 2013.
  11. D. Hartanto, Y. Kim, Neutronics simulation of burnup-dependent swelling of metallic fuel in a linear breed-andburn fast reactor (B&BR), T. Am. Nucl. Soc. 112, San Antonio (TX), 7-11 June, 2015.
  12. T. Ogata, T. Mizuno, Directions of Metal Fuel Development for Fast Reactors, Proceedings of GLOBAL 2009, Paris (France), 2009.
  13. L. Walters, D. Wade, G. Hofman, An Innovative Particulate Metallic fuel for Next-generation Nuclear Energy, Proceedings of ICAPP 2010, San Diego (CA), 2010.
  14. K. Devan, Abhitab Bachchan, A. Riyas, T. Sathiyasheela, P. Mohanakrishnan, S.C. Chetal, Physics design of experimental metal-fuelled fast-reactor cores for fullscale demonstration, Nucl. Eng. Des. 241 (2011) 3058-3067. https://doi.org/10.1016/j.nucengdes.2011.05.016
  15. W.N. Beck, R.J. Fousek, J.H. Kittel, The Irradiation Behavior of High Burnup U-Pu Alloy Prototype Fuel Elements, ANL-7388, Argonne National Laboratory, Lemont (IL), 1968.
  16. J.A. Horak, J.H. Kittel, F.L. Yaggee, Irradiation Behavior of Restrained and Vented Uranium 2 w/o Zirconium Alloy, ANL-6431, Argonne National Laboratory, Lemont (IL), 1962.
  17. P. Medvedev, Fuel-Performance Modeling Results for Representative FCRD Irradiation Experiments: Projected Deformation in the Annular AFC-3A U-10Zr Fuel Pins and Comparison to Alternative Designs, INL/EXT-12-27183, Idaho National Laboratory, Idaho Falls (ID), 2012.

Cited by

  1. An optimization study on the excess reactivity in a linear breed-and-burn fast reactor (B&BR) vol.94, pp.None, 2016, https://doi.org/10.1016/j.anucene.2016.02.017
  2. Development of methods for optimal assembly orificing design and application to a standing-wave Breed-and-Burn reactor vol.365, pp.None, 2016, https://doi.org/10.1016/j.nucengdes.2020.110706
  3. Study on the Sensitivity and Uncertainty of Nuclear Data to the Sodium-Cooled Linear Breed-and-Burn Fast Reactor Using SCALE6.2 Code vol.2021, pp.None, 2016, https://doi.org/10.1155/2021/9997867