DOI QR코드

DOI QR Code

변형률 속도에 따른 Fe-24.5Mn-4Cr-0.45C 합금의 인장 특성과 동적 변형시효

Influence of Strain Rate on Tensile Properties and Dynamic Strain Aging of an Fe-24.5Mn-4Cr-0.45C Alloy

  • 이승용 (서울과학기술대학교 신소재공학과) ;
  • 황병철 (서울과학기술대학교 신소재공학과)
  • Lee, Seung-Yong (Department of Materials Science and Engineering, Seoul National University of Science and Technology) ;
  • Hwang, Byoungchul (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
  • 투고 : 2016.03.21
  • 심사 : 2016.04.14
  • 발행 : 2016.05.27

초록

In the present study, the tensile properties and dynamic strain aging of an Fe-24.5Mn-4Cr-0.45C alloy were investigated in terms of strain rate. During tensile testing at room temperature, all the stress-strain curves exhibited serrated plastic flows related to dynamic strain aging, regardless of the strain rate. Serration appeared right after yield stress at lower strain rates, while it was hardly observed at high strain rates. On the other hand, strain-rate sensitivity, indicating a general relationship between flow stress and strain rate at constant strain and temperature, changed from positive to negative as the strain increased. The negative strain-rate sensitivity can be explained by the Portevin Le Chatelier effect, which is associated with dynamic strain aging and is dependent on the strain rate because it is very likely that the dynamic strain aging phenomenon in high-manganese steels is involved in the interaction between moving dislocations and point-defect complexes.

키워드

참고문헌

  1. Y. N. Dastur and W. C. Leslie, Metall. Mater. Trans. A, 12A, 749 (1981).
  2. H. K. Yang, Z. J. Zhang, F. Y. Dong, Q. Q. Duan and Z. F. Zhang, Mater. Sci. Eng. A, 607, 551 (2014). https://doi.org/10.1016/j.msea.2014.04.043
  3. J. E. Jung, J. Park, J. S. Kim, J. B. Jeon, S. K. Kim and Y. W. Chang, Met. Mater. Int., 20, 27 (2014). https://doi.org/10.1007/s12540-014-1008-y
  4. J. S. Kim, J. B. Jeon, J. E. Jung, K. K. Um and Y. W. Chang, Met. Mater. Int., 20, 41 (2014). https://doi.org/10.1007/s12540-014-1010-4
  5. D. Jeong, S. Lee, I. Seo, J. Yoo and S. Kim, Met. Mater. Int., 21, 22 (2015). https://doi.org/10.1007/s12540-015-1004-x
  6. L. Chen, H. S. Kim, S. K. Kim and B. C. De Cooman, ISIJ Int., 47, 1804 (2007). https://doi.org/10.2355/isijinternational.47.1804
  7. B. C. De Cooman, L. Chen, H. S. Kim, Y. Estrin, S. K. Kim and H. Voswinckel, Microstructure and Texture in Steels, Springer, Berlin, Germany (2009).
  8. A. H. Cotterell and B. A. Bilby, Proc. Phys. Soc., A62, 49 (1949).
  9. S. J. Lee, J. Kim, S. N. Kane and B. C. De Cooman, Acta Mater., 59, 6809 (2011). https://doi.org/10.1016/j.actamat.2011.07.040
  10. A. Bintu, G. Vincze, C. R. Picu, A. B. Lopez and J. J. Gracio, Mater. Sci. Eng. A, 629, 54 (2015). https://doi.org/10.1016/j.msea.2015.01.080
  11. P. Rodriguez, Bull. Mater. Sci., 6, 653 (1984). https://doi.org/10.1007/BF02743993
  12. K. Renard, S. Ryelandt and P. J. Jacques, Mater. Sci. Eng. A, 527, 2969 (2010). https://doi.org/10.1016/j.msea.2010.01.037
  13. J. M. Reed and M. E. Walter, Mater. Sci. Eng. A, 359, 1 (2003). https://doi.org/10.1016/S0921-5093(02)00729-3
  14. L. Remy, Acta Metall., 26, 443 (1978). https://doi.org/10.1016/0001-6160(78)90170-0
  15. O. Bouaziz, Scr. Mater., 66, 982 (2012). https://doi.org/10.1016/j.scriptamat.2011.11.029
  16. B. C. De Cooman, J. K. Kim and K. H. Chin, High Mn TWIP Steels for Automotive Applications, INTECH Open Access Publisher (2011).
  17. M. Koyama, T. Sawaguchi, T. Lee, C. S. Lee and K. Tsuzaki, Mater. Sci. Eng. A, 528, 7310 (2011). https://doi.org/10.1016/j.msea.2011.06.011
  18. Y. Nakada and A. S. Keh, Acta Metall., 18, 437 (1970). https://doi.org/10.1016/0001-6160(70)90129-X
  19. P. H. Adler, G. B. Olsen and W. S. Owen, Metall. Trans. A, 17A, 1725 (1986).