DOI QR코드

DOI QR Code

Preparation and Properties of the Fast-Curing γ-Ray-Shielding Materials Based on Polyurethane

  • Ni, Minxuan (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Tang, Xiaobin (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Chai, Hao (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Zhang, Yun (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Chen, Tuo (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Chen, Da (Department of Nuclear Science and Engineering, Nanjing University of Aeronautics and Astronautics)
  • 투고 : 2016.01.27
  • 심사 : 2016.06.03
  • 발행 : 2016.12.25

초록

In this study, fast-curing shielding materials were prepared with a two-component polyurethane matrix and a filler material of PbO through a one-step, laboratory-scale method. With an increase in the filler content, viscosity increased. However, the two components showed a small difference. Curing time decreased as the filler content increased. The minimum tack-free time of 27 s was obtained at a filler content of 70 wt%. Tensile strength and compressive strength initially increased and then decreased as the filler content increased. Even when the filler content reached 60 wt%, mechanical properties were still greater than those of the matrix. Cohesional strength decreased as the filler content increased. However, cohesional strength was still greater than 100 kPa at a filler content of 60 wt%. The ${\gamma}$-ray-shielding properties increased with the increase in the filler content, and composite thickness could be increased to improve the shielding performance when the energy of ${\gamma}$-rays was high. When the filler content was 60 wt%, the composite showed excellent comprehensive properties.

키워드

참고문헌

  1. S. Chen, M. Bourham, A. Rabiei, Novel light-weight materials for shielding gamma ray, Radiat. Phys. Chem 96 (2014) 27-37. https://doi.org/10.1016/j.radphyschem.2013.08.001
  2. S.Q. Xu, M. Bourham, A. Rabiei, A novel ultra-light structure for radiation shielding, Mater. Des 4 (2010) 2140-2146.
  3. H. Chai, X.B. Tang, M.X. Tang, F.D. Chen, Y. Zhang, D. Chen, Y.L. Qiu, Preparation and properties of flexible flameretardant neutron shielding material based on methyl vinyl silicone rubber, J. Nucl. Mater 464 (2015) 210-215. https://doi.org/10.1016/j.jnucmat.2015.04.048
  4. A.S. Wagh, S.Y. Sayenko, A.N. Dovbnya, A.V. Tarasov, V.A. Shkuropatenko, R.V. Tarasov, A.V. Rybka, A.A. Zakharchenk, Durability and shielding performance of borated Ceramicrete coatings in beta and gamma radiation fields, J. Nucl. Mater 462 (2015) 165-172. https://doi.org/10.1016/j.jnucmat.2015.03.049
  5. V. Harish, N. Nagaiah, H. Kumar, Lead oxides filled isophthalic resin polymer composites for gamma radiation shielding applications, Indian J. Pure Appl. Phys. 50 (2012) 847-850.
  6. S. Mandal, S. Alam, Studies on gamma radiation resistance polyethersulphone films reinforced by lead oxide, Mater. Res. Innov 17 (2013) 373-376. https://doi.org/10.1179/1433075X12Y.0000000056
  7. M. Danowska, L. Piszczyk, M. Strankowski, M. Gazda, J.T. Haponiuk, Rigid polyurethane foams modified with selected layered silicate nanofillers, J. Appl. Polym. Sci. 130 (2013) 2272-2281. https://doi.org/10.1002/app.39432
  8. K. Shimizu, M.L. Abel, C. Phanopoulos, S. Holvoet, J.H. Watts, The characterisation of the interfacial chemistry of adhesion of rigid polyurethane foam to aluminium, J. Mater. Sci. 47 (2012) 902-918. https://doi.org/10.1007/s10853-011-5871-3
  9. J. Kim, J. Cho, Y.S. Lim, Bonding of urethane reactants to aluminum surface, J. Mater. Sci. 40 (2005) 2789-2794. https://doi.org/10.1007/s10853-005-2409-6
  10. S.H. Kim, M.C. Lee, H.D. Kim, H.C. Park, H.M. Jeong, K.S. Yoon, B.K. Kim, Nanoclay reinforced rigid polyurethane foams, J. Appl. Polym. Sci. 117 (2010) 1992-1997. https://doi.org/10.1002/app.32116
  11. S. Harpal, T.P. Sharma, A.K. Jain, Reactivity of the raw materials and their effects on the structure and properties of rigid polyurethane foam, J. Appl. Polym. Sci. 106 (2007) 1014-1023. https://doi.org/10.1002/app.26525
  12. ASTM (American Society for Testing and Materials) D 3574-08: Standard test methods for flexible cellular materialsdslab, bonded, and molded urethane foams, 2008, pp. 1-24.
  13. ASTM (American Society for Testing and Materials) D 1621-10: Standard test method for compressive properties of rigid cellular plastics, 2010, pp. 1-5.
  14. JC/T 998-2006: Spray polyurethane foam for thermal insulation, 2006, pp. 1-4 [In Chinese].
  15. G. Verbist, D. Weaire, A.M. Kraynik, The foam drainage equation, J. Phys. Condens. Matter 8 (1996) 3715-3731. https://doi.org/10.1088/0953-8984/8/21/002
  16. A. Saint-Jalmes, Physical chemistry in foam drainage and coarsening, Soft Matter 2 (2006) 836-849. https://doi.org/10.1039/b606780h

피인용 문헌

  1. Efficient, flexible and lead-free composite based on room temperature vulcanizing silicone rubber/W/Bi2O3 for gamma ray shielding application vol.29, pp.14, 2016, https://doi.org/10.1007/s10854-018-9344-1
  2. Synthesis and characterization of the POSS/PCL-graphene oxide composites; the effects of gamma-radiation on its thermal properties and molecular weight vol.6, pp.12, 2019, https://doi.org/10.1088/2053-1591/ab59b1