DOI QR코드

DOI QR Code

Automatic Optimal Scheduler for Multiproduct Batch Processes

다제품 회분식 공정 생산계획 자동화 및 최적화

  • Yi, Gyeongbeom (Department of Chemical Engineering, Pukyong National University)
  • 이경범 (부경대학교 화학공학과)
  • Received : 2016.07.27
  • Accepted : 2016.10.31
  • Published : 2016.12.01

Abstract

An inventory control system was developed for multiproduct batch plants with an arbitrary number of batch processes and storage units. Customer orders are received by the plant at intervals and in quantities that are subject to random fluctuations. The objective of the plant operation is to minimize the total cost while maintaining inventory levels within the storage or warehouse capacity by adjusting the startup times, the quantities of raw material orders, and production batch sizes. An adaptive model-based control algorithm was developed that uses a periodic square wave model to represent the flows of material between the processes and the storage units. The effectiveness of this approach was demonstrated by performing simulations.

Keywords

References

  1. G. Yi, "Optimal design of non-sequential batch-storage network," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 9, no. 5, pp. 407-412, 2003. https://doi.org/10.5302/J.ICROS.2003.9.5.407
  2. G. Yi and G. V. Reklaitis, "Optimal design of batch-storage network with multitasking semi-continuous processes," AIChE Journal, vol. 52, pp. 269-281, 2006. https://doi.org/10.1002/aic.10582
  3. G. Yi, "Optimal design of process-inventory network considering backordering costs," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 20, no. 7, pp. 750-755, 2014. https://doi.org/10.5302/J.ICROS.2014.14.0033
  4. G. Yi and G. V. Reklaitis, "Model based feedback inventory controller for Intermediate storage in batch processes," Journal of Process Control, vol. 4, pp. 227-237, 1994. https://doi.org/10.1016/0959-1524(94)80044-8
  5. G. Yi, "Warehouse inventory control system using periodic square wave model," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 21, no. 11, pp. 1076-1080, 2015. https://doi.org/10.5302/J.ICROS.2015.15.0168