Journal of Welding and Joining

  • 제34권3호
  • /
  • Pages.17-22
  • /
  • 2016
  • /
  • 2466-2232(pISSN)
  • /
  • 2466-2100(eISSN)
대한용접접합학회 (The Korean Welding and Joining Society)
권호 표지
DOI QR코드

DOI QR Code

이종재 Al5083-O/DP590 마찰교반점용접시 툴의 삽입깊이(Plunge Depth)가 용접성에 미치는 영향

Effect of Tool Plunge Depth on Weldability of Dissimilar Al5083-O/DP590 Friction Spot Joint

  • 정수옥 (조선대학교 용접.접합과학공학과 대학원) ;
  • 방한서 (조선대학교 용접.접합과학공학과) ;
  • 방희선 (조선대학교 용접.접합과학공학과)
  • Jeong, Su-Ok (Graduate School of Welding and Joining Science Engineering, Chosun University) ;
  • Bang, Han-Sur (Dept. of Welding and Joining Science Engineering, Chosun University) ;
  • Bang, Hee-Seon (Dept. of Welding and Joining Science Engineering, Chosun University)
  • 투고 : 2016.05.30
  • 심사 : 2016.06.21
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In terms of mechanical and metallurgical characteristics, the effect of tool plunge depths(0.2, 0.5, 0.7, 1.0, 1.5mm) on weldability in dissimilar Al5083-O/DP590 friction spot joint has been clarified. From the results, it is found that the stirred nugget was stably formed at a plunge depth of more than 0.7mm, which is caused by improved stirring action against each other material. With increasing a plunge depth, the thickness of intermetallic compound(IMC) layer in Al5083-O/DP590 joint has a tendency to increase. The tensile shear strength reaches to the maximum failure load of 6.5kN at a plunge depth of 0.7mm due to relatively small decrease in the thickness of Al5083-O sheet and relatively minute thickness of IMC layer, compared with those of other plunge depth conditions.

키워드

참고문헌

  1. Y. S. Kim, Future of the friction stir spot welding technology for non-ferrous metal, Journal of KWJS, 30(3) (2012), 4-14 (in Korean)
  2. S. H. Chowdhury, D. L. Chen, S. D. Bhole, X. Cao, and P. Wanjara, Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive, Materials Science and Engineering: A, 562 (2013), 53-60 https://doi.org/10.1016/j.msea.2012.11.039
  3. H. S. Shin, Y. C. Jung and K. Choi, Effects of tool speed on joining characteristics during friction stir spot welding of Mg-alloy (AZ31B) sheet, Journal of KWJS, 29(2) (2011), 80-87 (in Korean)
  4. S. H. Kim, S. W. Kim, S. J. Park and W. S. Chang, Dissimilar Friction Spot Joining : A5052-H32 / A6022-T4, RIST Journal of R&D, 21(2) (2007), 153-159 (in Korean)
  5. C. K. Chun, H. J. Kim and W. S. Chang, Friction Stir Spot Joining on Aluminum Alloy for Transportation, Journal of KWJS, 26(6), (2008), 23-29 (in Korean)
  6. E. Fereiduni, M. Movahedi and A. H. Kokabi, Aluminum/steel joints made by an alternative friction stir spot welding process, Journal of Materials Processing Technology, 224 (2015), 1-10 https://doi.org/10.1016/j.jmatprotec.2015.04.028
  7. W. H. Lee, Y. G. Lim, H. G. Ryu and B. J. Park, Characters of Zinc-coated steel and Al 6061 using FSW, RIST Journal of R&D, 22(4) (2008), 254-258 (in Korean)
  8. R. S. Mishra, and Z. Y. Ma, Friction stir welding and processing, Materials Science and Engineering :Reports, 50(1) (2005), 1-78 https://doi.org/10.1016/j.mser.2005.07.001
  9. Y. M. Yeon, C. Y. Lee, W. B. Lee, S. B. Jung, and W. S. Chang, Spot Friction Stir Welding and Characteristics of Joints in Aluminium Alloys, Journal of KWJS, 23(3) (2005), 16-20 (in Korean)
  10. G. Buffa, L. Fratini, and MARIO. Piacentini, On the influence of tool path in friction stir spot welding of aluminum alloys, Journal of materials processing technology, 208(1) (2008), 309-317 https://doi.org/10.1016/j.jmatprotec.2008.01.001
  11. T. K. Han, K. Y. Lee, and J. S. Kim, Recent developments and weldability of advanced high strength steels for automotive applications, Journal of KWJS, 27(2) (2009), 13-18
  12. J. M. Piccinia, H. G. Svoboda, Effect of pin length on Friction Stir Spot Welding (FSSW) of dissimilar Aluminum-Steel joints, Procedia Materials Science, 9 (2015), 504-513 https://doi.org/10.1016/j.mspro.2015.05.023
  13. C. K. Chun, H. J. Kim, T. K. Kim and W. S. Chang, Dissimilar Friction Spot Joining : A5052-H32 / A6022-T4, RIST Journal of R&D, 21(4) (2007), 281-286 (in Korean)
  14. T. Pan, A. Joaquin, D. E. Wilkosz, L. Reatherford, J. M. Nicholson, Z. Feng and M. L. Santella, Spot friction welding for sheet aluminum joining, In Proceedings of the 5th international symposium of friction stir welding, 1416 (2004)
  15. M. Tutar, H. Aydin, C. Yuce, N. Yavuz, and A. Bayram, The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array, Materials & Design, 63 (2014), 789-797 https://doi.org/10.1016/j.matdes.2014.07.003
  16. T. J. Luo, B. L. Shi, Q. Q. Duan, J. W. Fu, and Y. S. Yang, Fatigue behavior of friction stir spot welded AZ31 Mg alloy sheet joints, Transactions of Nonferrous Metals Society of China, 23(7) (2013), 1949-1956 https://doi.org/10.1016/S1003-6326(13)62682-5
  17. Y. Q. Zhao, H. J. Liu, S. X. Chen, Z. Lin, and J. C. Hou, Effects of sleeve plunge depth on microstructures and mechanical properties of friction spot welded alclad 7B04-T74 aluminum alloy, Materials & Design, 62, (2014), 40-46 https://doi.org/10.1016/j.matdes.2014.05.012
  18. N. H. Kang, Y. G. Yoo, C. W. Lee, and J. H. Kim, Intermetallic Compounds Behavior at Laser Overlay Interface of Aluminum and Fe-based Powder, Journal of KWJS, 25(3) (2007), 51-56 (in Korean)
  19. E. H. Kim, K. J. Lee, and K. H Song, Evaluation of mechanical properties on friction stir lap jointed Al6061/HT590 alloys, J. of Welding and Joining, 33(2) (2015), 8-13 (in Korean) https://doi.org/10.5781/JWJ.2015.33.2.8

피인용 문헌

  1. Effects of processing parameters on the friction stir spot joining of Al5083-O aluminum alloy to DP590 steel vol.23, pp.3, 2017, https://doi.org/10.1007/s12540-017-6574-3