DOI QR코드

DOI QR Code

Reduction Properties of Environment-friendly Mortar for Indoor Air Contaminant Using Phytoncide and Palm Active Carbon

피톤치드와 야자활성탄을 사용한 친환경 모르타르의 실내 공기 오염 물질 저감 특성

  • 이용 (한밭대학교 건설환경조형대학 건축공학과) ;
  • 이승호 (한밭대학교 건설환경조형대학 건축공학과) ;
  • 경인수 (한밭대학교 건설환경조형대학 건축공학과) ;
  • 이상수 (한밭대학교 건설환경조형대학 건축공학과)
  • Received : 2016.02.04
  • Accepted : 2016.05.10
  • Published : 2016.06.30

Abstract

The life of people in the modern-day society has been improved in terms of both quality and quantity owing to the rapid industrial technology advancement and economic growth today. The use of building materials harmful to environments, however, has resulted in deterioration of health, indoor conditions, and air pollution, which involve various environmental and social problems. Since modern people would stay in indoor places such as school, office, and residence, during the most of the time in a day, the effect of such materials on health is of significance. Thus, this study proposes a building material that can enhance the quality of indoor air and reduce harmful substances indoors. The material used in this study consists of phytoncide and palm active carbon, which are well-known for the effect of indoor air quality improvement. As a result of the experiment, it turned out that when palm active carbon and phytoncide were used, the higher addition ratio, the higher absorption ratio. The density decreased accordingly. Strength properties gradually decreased as the addition ratio of phytoncide and palm active carbon increased. As for the measurements of VOCs, HCHO, and radon gas, as phytoncide and palm active carbon were added, the ratio of indoor air contaminants decreased accordingly.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Kang, H. (2009). Engineering Characteristics of Concrete Using Waste Activated Carbon, Thesis, CHUNGNAM National University
  2. Kim, U. (2010), Phytoncide extraction and processing Technology, The Korean Society of Dyers and Finishers, Dyeing and Finishing 5, 71-82
  3. Lee, K. (2009). Ambient Adsorption of Low-level Carbon Dioxide by Metal Treated Activated Carbon, Journal of Korean Society for Atmospheric Environment, V.25 N. 4, 316-324 https://doi.org/10.5572/KOSAE.2009.25.4.316
  4. Mun, J. (2005). Adsorption of Anionic Species on Clay Minerals. Journal of Korean Society of Environmental Engineers, V.27 N. 10, 1058-1064
  5. O, S. (2015). Characteristic of the Environment-Friendly Mortar Using the Adsorbent Reducing the Radon gas, Journal of the Architectural Institute of Korea Structure & Construction, 31(7), 51-58 https://doi.org/10.5659/JAIK_SC.2015.31.7.51
  6. Park, C. (2007). Emission Characteristics of Volatile Organic Compounds(VOCs) on Concrete, Journal of Korea Concrete Institute, 19(2), 789-792
  7. Park, K. (2014). Radon Mitigation of Building materials using Radon Reducing Paint, Thesis, Heo-Seo University
  8. Yoon, K. (2008). Experimental Study on Formaldehyde Removal of Concrete by Using Activated Carbon and Functional Catalyst Materials, Journal of Korea Concrete Institute, 20(1), 729-732