The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Verification of High Speed Performance for the Electronic Pedal using a Rotor

회전체를 이용한 전자페달의 고속 성능 검증

  • KIM, Yong-Kyu (Signaling & Communication research team, Korea Railroad Research Institute) ;
  • GO, Jun-Young (Electrical Planning team, Electrical Division, Korea Railroad) ;
  • YOON, Yong-Ki (Signaling & Communication research team, Korea Railroad Research Institute) ;
  • KIM, Ju-Yeop (Signaling & Communication research team, Korea Railroad Research Institute) ;
  • LEE, Jong-Hyun (Railroad Electrical system Engineering Dept. Woosong University)
  • Received : 2016.06.07
  • Accepted : 2016.07.22
  • Published : 2016.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we have checked a method of performance evaluation for electronic pedal, which is a core technology of HBD for detecting the axle temperature of high-speed train. As it is practically impossible to conduct train speed test of 500 km/h, we utilize a high speed rotor for evaluating high speed performance of the electronic pedal instead. According to this method, we found that the measurement results by the velocity measuring instrument is similar with the ones from this research through the high speed rotor. In conclusion, it will be possible to conduct reliability evaluation for high speed performance for Beacon, Balise and RFID, which are utilized for transmitting vital information of train control systems through using the rotor.

Keywords

References

  1. G. M. Lee, J. H. Baek, D. H. Shin, "Review on HSL Safety Equipment Improvement to Train Speed Enhancement", 2010 summer conference of IEIE, pp 1796-1798, 2010.
  2. T. W. Moynihan, G. W. English, "Railway Safety Technologies", Research and Traffic Group report, Transport canada, 2007.
  3. A. Bracciali, "Wayside train monitoring systems : A state-of-the-art and running safety implications", International Journal of Railway Technology, Volume 1, Issue 1, Pages 231-247, 2012. https://doi.org/10.4203/ijrt.1.1.11
  4. Eckehard Schnieder, Geza Tarnai, "FORMS/FORMAT 2010 Formal methods for automation and safety in railway and automotive systems : Metodology for assessing safety system application for a railway hot box protection system" Springer-Verlag, Berlin, pp. 125-133, 2010.
  5. Olegas Lunys, Stasys Dailydka, Gintautas Bureika, "Investigation on features and tendences of axle-box heating", TRANSPORT PROBLEMS, Volume 10 Issue 1, page 105-114, 2015. https://doi.org/10.21307/tp-2015-011
  6. J. S. Choi, H. S. Kim, J. Y. Ko, J. H. Lee, "A Study Design Axle Counter with Hot Box Detector for the measurement position train wheel", 2014 Autumn conference of the Korean Society of Mecanical engineers, pp. 107-108, 2014.
  7. J. W. Lim, J. S. Choi, S. H Yoon, J. H Shin, H. T Lim, S. Y. Kwak, "Study on Optical System of 4 Pixel Infrared Detector for detecting heat of Axle", 2013 Spring conference of the Korean Society for Railway, pp. 864-869, 2013.
  8. J. H. Shin, S. H. Yoon, J. S. Choi, J. W. Lim, H. T. Lim, S. Y. Kwak, "Research on development of HBD velocity simulation device using a Rotor", 2013Spring conference of the Korean Society for Railway, pp. 897-902, 2013.
  9. Eukorail, "Corrective maintenance sheet train control system Hot box detectors sensor and processing", WBS No K663-3-U2610-GL+T-007, 2005.
  10. T. H. Lee, S. B. Lee, H. P. Hong, H. S. Lee, K. B. Park, "A review of the train position detection method for neutral section with energized condition", 2010 Summer conference of the Korean Society for Railway, pp. 1100-1105, 2010.
  11. S. C. Ryu, I. C. Yeo, S. C. Rho, K. K. Yoo, "Study on the circuit for off-rail detection of axle counter sensor", KIEE Summer conference 2015, pp. 1615-1616, 2015.
  12. Simeon Cox, "A review of axle counter application; Reset restore methods, their history, their current application and future", IRSE Australasia Technical meeting, 2011.
  13. John Gifford Firse, Trevor Moore Firse, Joe Borg, "Axle counters for heavy traffic applications", Institution of Railway Signal Engineers Technical Conference, 2007.
  14. D. A. Norris B. E, "Integrating an axle counting function into the VPI computer based interlocking", IRSE Integrated Axle Counter System, 1993.
  15. I. C. Yeo, S. C. Rho, Y. H. Kim, "Shape optimization of the traim wheel detecting sensor according to a magnetic field gradient", 2014 Autumn conference of the Korean Society for Railway, pp. 445-450, 2014.
  16. J. S. Choi, B. Kim, S. C. Rho, " A train locating device using the current phase difference upon magnetic field variation", Journal of the Korean Society for Railway, Vol 15, No 6, pp. 604-608, 2012. https://doi.org/10.7782/JKSR.2012.15.6.604
  17. Eukorail, "Data sheet train control system electronic pedals", WBS No K663-3-U2310-GL+T-004, 2005.
  18. Eukorail, "Preventive maintenance sheet train control system electronic pedals", WBS No K663-3-U2510 -GL+T-003, 2005.
  19. Eukorail(2005), "Corrective maintenance sheet train control system electronic pedals", WBS No K663-3-U2610-GL+T-003, 2005.
  20. Eukorail, "Description and functional manual train control system, train monitoring and environmental condition checking functions", WBS No K663-3-U2210-GL+T-061, 2003.
  21. J. Y. Ko (2016), "A study on the test for the performance verification in development for a HBD for HST", Ph. D thesis, WooSong University, 2014.
  22. S. B. Lee, Y. S. Ihn, D. H. Oh, H. Y. Kim, H. S. Lee, J. C. Koo, "Correction of mass unbalance of a high precision rotor", Transaction of the Korean Society for Noise and Vibration engineer, Vol 17, No 8, pp. 720-725, 2007. https://doi.org/10.5050/KSNVN.2007.17.8.720