참고문헌
- Goldstein, R. J., 1971, "Film Cooling," Advances in Heat Transfer, Vol. 7, pp. 321-379. https://doi.org/10.1016/S0065-2717(08)70020-0
- Goldstein, R. J., Eckert, E. R. G., and Ramsey, J. W., 1968, "Film Cooling With Injection Through Holes: Adiabatic Wall Temperatures Downstream of a Circular Hole," J. Eng. Power, Vol. 90, No. 4, pp. 384-393.
- Haven, B. A., Yamagata, D. K., Kurosaka, M., Yamawaki, S., and Maya, T., 1997, "Anti-Kidney Pair or Vortices in Shaped Holes and Their Influence on Film Cooling Effectiveness," ASME Paper 97-GT-045.
- Heidmann, J. D., 2008, "A Numerical Study of Anti-Vortex Film Cooling Designs at High Blowing Ratio," ASME Turbo Expo 2008: Power for Land, Sea, and Air, Paper NO. GT2008-50845.
- Kim, J. H., Kim, S. M., and Kim, K. Y., 2014, "Effects of Geometry of Anti-Vortex Holes on Film-Cooling Effectiveness," The KSFM Journal of Fluid Machinery, Vol. 17, No. 2, pp. 12-23. https://doi.org/10.5293/kfma.2014.17.2.012
- Park, S. S., Park, J. S., Lee, S. H., Moon, Y. G., and Kwak, J. S., 2014, "Effect of Anti-Vortex Hole Angle on the Flat Plate Film Cooling Effectiveness," The KSFM Journal of Fluid Machinery, Vol. 17, No. 5, pp. 5-10. https://doi.org/10.5293/kfma.2014.17.5.005
- Dhungel, A., Lu, Y., Phillips, W., Ekkad, S. V., and Heidmann, J., 2007, "Film Cooling From a Row of Holes Supplemented With Anti Vortex Holes," ASME Turbo Expo 2007: Power for Land, Sea, and Air, Paper NO. GT2007-27419.
- Goldstein, R. J. and Eckert, E. R. G., 1972, "Effect of Hole Geometry and Density on Three-Dimensional Film Cooling," Int. J. Heat Mass Transfer, Vol. 17, No. 5, pp. 595-607. https://doi.org/10.1016/0017-9310(74)90007-6
- Colban, W. F., Thole, K. A., and Bogard, D., 2011, "A Film-Cooling Correlation for Shaped Holes on a Flat-Plate Surface," J. Turbomach., Vol. 133, Iss. 1, Paper NO. 011002(1-11).
- Thole, K., Gritsch, M., Schulz, A., and Wittig, S., 1996, "Flowfield Measurements for Film-Cooling Holes With Expanded Exits," ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition, Paper NO. 96-GT-174.
- Saumweber, C., Schulz, A., and Wittig, S., 2002, "Free-Stream Turbulence Effects on Film Cooling With Shaped Holes," ASME Turbo Expo 2002: Power for Land, Sea, and Air, Paper NO. GT2002-30170.
- Brauchmann, D. and von Wolfersdorf, J., 2005, "Infulence of Compound Angle on Adiabatic Film Cooling Effectiveness and Heat Transfer Coefficient for a Row of Shaped Film Cooling Holes," ASME Turbo Expo 2005: Power for Land, Sea, and Air, Paper NO. GT2005-68036.
- Bunker, R. S., 2005, "A Review of Shaped Hole Turbine Film Cooling Technology," ASME, J. Heat Transfer, Vol. 127, No. 4, pp. 441-453. https://doi.org/10.1115/1.1860562
- Schroeder, R. P. and Thole, K. A., 2014, "Adiabatic Effectiveness Measurements for a Baseline Shaped Film Cooling Hole," ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Paper NO. GT2014-25992.
- Narzary, D. P., Liu, K. C., Rallabandi, A. P., and Han, J. C., 2011, "Influence of Coolant Density on Turbine Blade Film-Cooling Using Pressure Sensitive Paint Technique," ASME Turbo Expo 2010: Power for Land, Sea, and Air, Paper No. GT2010-22781.
- Park, S. D., Lee, K. S., Kim, H. B., Kwak, J. S., and Kim, J. H., 2008, "Measurement of the Film Cooling Effectiveness on a Flat Plate using Pressure Sensitive Paint," The Korean Society of Propulsion Engineers, Vol. 12, No. 5, pp. 67-72.
- Han, J. C. and Rallabandi, A., 2010, "Turbine Blade Film Cooling Using PSP Technique," Frontiers in Heat and Mass Transfer(FHMT), 1-013001.
- Charbonnier, D., Ott, P., Jonsson, M., Cottier, F., and Kobke, T., 2009, "Experimental and Numerical Study of the Thermal Performance of a Film Cooled Turbine Platform," ASME Turbo Expo 2009: Power for Land, Sea, and Air, Paper No. GT2009-60306.
- Gao, Z., Narzary, D., and Han, J. C., 2009, "Turbine Blade Platform Film Cooling With Typical Stator-Rotor Purge Flow and Discrete-Hole Film Cooling," ASME Turbo Expo 2008: Power for Land, Sea, and Air, Paper No. GT2008-50286.
- Park, S. S., Moon, Y. G., Park, J. S., and Kwak, J. S., 2016, "Effect of Anti-Vortex Holel Angle on the Film Cooling Effectiveness," accepted for publication in Heat Transfer Research.