DOI QR코드

DOI QR Code

Vibration Analysis of Multi Cracked Nonuniform Nanobeam by using Differential Transformation Method

미분변환법을 이용한 다중 크랙을 갖는 비균일 나노빔의 진동해석

  • 신영재 (안동대학교 기계설계공학과) ;
  • 박성현 (안동대학교 대학원 기계설계공학과) ;
  • 김진홍 (안동대학교 대학원 기계설계공학과) ;
  • 유영찬 (안동대학교 건축공학과)
  • Received : 2016.05.30
  • Accepted : 2016.07.29
  • Published : 2016.09.01

Abstract

In this study, the governing equations of motion for multi-cracked nonuniform nanobeam based on nonlocal elasticity theory and embedded in an elastic medium were derived. DTM(differential transformation method) was applied to vibration analysis of multi-cracked nonuniform nanobeam based on nonlocal elasticity theory and embedded in an elastic medium. The non-dimensional natural frequencies of this nanobeam were obtained for eoe, crack stiffness and elastic medium stiffness with various boundary conditions. The results obtained by this method was compared with previous works and showed the close agreement between two methods. The important conclusions obtained by this study are as follows : 1. As the length of nanobeam is shorter, the effect of scale coefficient is greater. 2. The locations of crack change non-dimensional natural frequency, In the case of fixed-fixed ends, the non-dimensional natural frequency is the biggest in the first crack location of 0.6L of nanobeam length, and the smallest in both ends. In the case of fixed-free ends, the closer the location of first crack go tho the free end, the bigger the non-dimensional natural frequency. 3. As the stiffness of crack is greater, the non-dimensional natural frequency is smaller, And the effect of crack stiffness is similar on both fixed-free ends and fixed-fixed ends. 4. The bigger the stiffness of elastic medium, the greater the non - dimensional natural frequency.

본 연구에서는 비국지 탄성이론과 미분변환법을 이용하여 탄성매질속 다중 크랙을 가진 비균질 나노빔의 지배방정식을 유도하고, 유도된 지배방정식과 경계조건에 미분변환법을 적용하여 나노빔의 축방향의 진동해석을 하며, 나노빔의 첫단과 끝단의 경계조건이 각각 고정단(Clamped end)과 자유단(Free end)의 경우에 대하여 수치해석을 수행하였다. 수치해석 결과를 기존 연구결과와 비교하여 타당성을 입증한 후, 비국지 작은 척도효과 (Nonlocal small scale effect), 탄성매질의 강성, 크랙의 위치, 크랙의 강성 그리고 비국지 탄성이론의 나노빔에 대한 진동해석 결과를 고찰하였다.

Keywords

References

  1. Aydogdu, M. (2012), Axial Vibration Analysis of Nanorods Embedded in an Elastic Medium using Nonlocal Elsticity, Mechanics Research Communications 43, 34-40. https://doi.org/10.1016/j.mechrescom.2012.02.001
  2. Eringen, A. C. (1983), On Differential Equations of Nonlocal Elasticity and Solutions of Screw Dislocation and Surface Waves, Journal of Applied Physics, 4703-4710.
  3. Hsu, J. C., Lee, H. L., and Chang, W. J. (2011), Longitudinal Vibration of Cracked Nanobeams using Nonlocal Elasticity Theory, Current Applied Physics, 1384-1388.
  4. Jeong, K. Y. (2012), Electrically driven nanobeab lasers, KAIST, TD 530-12-69.
  5. Kim, M. J., and Kang, N. C. (2010), Vibration Analysis of a Rotating Cantilever Beam with Tip Mass using DTM, Transactions of the Korean Society for Noise and Vibration Engineering, 1058-1063.
  6. Kim, S. J. (2014), Study on the Photonic Nanobeam Laser and its Applications, KAIST, TD 530-14-297.
  7. Kumar Vikram Singh (2009), Transcendental Inverse Eigenvalue Problems in Damage Parameter Estimation, Mechanical Systems and Signal Processing, 23, 1870-1883. https://doi.org/10.1016/j.ymssp.2008.05.009
  8. Malik, M., and Dang, H. H. (1998), Vibration Analysis of Continuous Systems by Differential Transformation, Applied Mathematics and Computation, 96, 17-26. https://doi.org/10.1016/S0096-3003(97)10076-5
  9. Shin, Y. J., Hwang, K. S., Yun, J. H., and Yoo, Y. C. (2003), Vibration Analysis of Euler-Bernoulli Beam with Open Cracks on Elastic Foundations using Differential Transformation Method, The autumn scholarship conference of the Korean Society for Noise and Vibration Engineering, 690-695.
  10. Zhou, J. K. (1986), Differential Transformation and its Application for Electrical Circuits, Huazhong University Press, Wuhan China (in Chinese).