The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Efficiency Evaluation Standard and Regulation for Electric Motor Systems

전동기 시스템의 효율 평가 규격 및 규제 현황 연구

  • Jun, Hee-Deuk (Dept. of Electrical Engineering, Pukyong National University) ;
  • Park, Han-Seok (Dept. of Electrical Engineering, Pukyong National University) ;
  • Kim, Dea-Kyong (Dept. of Electrical Control Engineering, Sunchon National University) ;
  • Woo, Kyung-Il (Dept. of Electrical Engineering, Pukyong National University)
  • Received : 2016.06.03
  • Accepted : 2016.08.09
  • Published : 2016.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Electric motor systems account for more than half of all electric systems and the amount of energy consumption of those is almost 70 percent of total energy consumption of electric motor systems in industry. As electric motor systems are very responsible for global electricity savings and environment protection. Many international organizations are supporting standards and policy development processes to improve the efficiency of electric motor systems. Many standards are being developed at technical committee of IEC that has been required in order to support the implementation of efficiency regulations. High efficiency standards and levels for electric motor systems are slowly being introduced and compulsory in many countries. Therefore understanding the international efficiency evaluation standards and the regulation of electric motor systems of each country is important. This paper presents the current status and trends of international evaluation standards and regulations about the efficiency of electric motor systems.

Keywords

References

  1. A. de Almeida, Ed., Improving the Penetration of Energy-Efficient Motors and Drives. Coimbra, Portugal : Univ. Coimbra, 2000, prepared for the SAVE Programme, European Commission.
  2. A. De Almeida, F. Ferreira, J. Fong, and P. Fonseca, "EuP Lot 11 Motors, Ecodesign Assessment of Energy Using Products," ISR-Univ. Coimbra, Brussels, Belgium, Final Report for the European Commission, Feb. 2008
  3. IEA(International Energy Agency), Testing Centres Workshop "Policy Guidelines for Electric Motor Systems-Part2: Toolkit for Policy Makers", 2014
  4. IEA(International Energy Agency), "Proposed work plan for energy-efficiency policy opportunities for electric motor-driven systems" 2011
  5. Martin Doppelbauer, "Current Developments in IEC standards for Energy Efficiency of Electric Motors" Eemods 13, 2013.
  6. www.motorsummit.ch., "EMSA Workshops", 2014
  7. www.motorsystems.org, "EMSA Webpage", 2016
  8. Alex Chausovsky: A Global Market Update. In: Proceedings of the 8th International Conference on Energy Efficiency in Motor Driven Systems, 28-30 October 2013
  9. www.iea.org, "Publications". 2016
  10. ISR-University of Coimbra, " Eup Lot 30: Electric Motors and Drivers" 2012
  11. IEC 60034-1 Ed. 12.0b, "Rotating electrical machines - Part 1: Rating and performance", 2010
  12. IEC 60034-2-1 Ed. 1.0b, "Rotating electrical machines - Part 2-1:Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)", 2007
  13. IEC 60034-2-1 Ed. 2.0, "Rotating electrical machines - Part 2-1:Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)", 2014
  14. IEC 60034-2-2 Ed. 1.0b, "Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1", 2010
  15. IEC 60034-2-3 TS, "Rotating electrical machines - Part 2-3 : Specific test methods for determining losses and efficiency of converter-fed AC induction motors", 2013
  16. IEC 60034-30, "Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cageinduction motors (IE code)", 2008
  17. IEC 60034-30-1 Ed. 1.0, "Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)", 2014
  18. IEC60034-30-2 TC2, WG31, "Rotating electrical machines Part 30-2: Efficiency classes of variable speed AC motors (IE-code)", 2/1782/CD, 2015
  19. IEC/TC 60034-31 Ed. 1.0b, "Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide", 2010
  20. EN 50598-2 Ed. 1.0, "Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 2 : energy efficiency indicators for power drive systems and motor starters", 2015
  21. IEC 61800 SC2 22G, "Adjustable speed power electrical drive systems: Energy Efficiency of adjustable speed electric power drive systems - Part 9", 22G/277/NP, 2014
  22. Kyung-II Woo, Han-Seok Park, Hee-Deuk Jun, "A Study on the International Standard and Regulation for Electric Motor and Drivers", KIPE Magazine vol. 63, P. 437-443, 2014
  23. P. Waide and C. Brunner, "Energy-Efficiency Policy Opportunities for Electric Motor Systems," IEA, 2011.
  24. Anibal de Almeida, University of Coimbra, "Electric Motor MEPS Guide", 2009
  25. NISSEI CORPORATION Catalog, "The Regulation Trend of japan and other countries", 2014
  26. "National Resources Canada - Energy Efficiency Regulations - Electric Motors," [Online]. Available:
  27. European Commission, Commission Regulation (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for electric motors, Brussels, 2009
  28. European Commission, Commission Regulation (EC) No 4/2014 of 6 Jan 2014 amending Regulation (EC) No 640/2009, 2014.
  29. MKE, KEMCO, "Korea Energy Standards & Labeling", 2011
  30. MKE, "Minimum Energy Performance Standard ACT", Num. 2015-28, 2015
  31. Ninistry of Economy, Trade and Industry in Japan, "Final Report by Tree-phase Induction Motor Evaluation Standards Subcommittee, Energy Efficiency Standards Subcommittee of the Advisory Committee for Natural Resources and Energy", 2013
  32. GB 18613-2012 Minimum Allowable Values of Energy Efficiency and the Energy Efficiency Grades for Small and Medium Three-phase Asynchronous Motors, People's Republic of China and the Standardization Administration of China, 2012