DOI QR코드

DOI QR Code

Monitoring concrete bridge decks using infrared thermography with high speed vehicles

  • Hiasa, Shuhei (Department of Civil Environmental and Construction Engineering, University of Central Florida) ;
  • Catbas, F. Necati (Department of Civil Environmental and Construction Engineering, University of Central Florida) ;
  • Matsumoto, Masato (NEXCO-West USA Inc.) ;
  • Mitani, Koji (NEXCO-West USA Inc.)
  • Received : 2016.03.05
  • Accepted : 2016.06.08
  • Published : 2016.09.25

Abstract

There is a need for rapid and objective assessment of concrete bridge decks for maintenance decision making. Infrared Thermography (IRT) has great potential to identify deck delaminations more objectively than routine visual inspections or chain drag tests. In addition, it is possible to collect reliable data rapidly with appropriate IRT cameras attached to vehicles and the data are analyzed effectively. This research compares three infrared cameras with different specifications at different times and speeds for data collection, and explores several factors affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspection at normal driving speeds. These results show that IRT can detect up to 2.54 cm delamination from the concrete surface at any time period. It is observed that nighttime would be the most suitable time frame with less false detections and interferences from the sunlight and less adverse effect due to direct sunlight, making more "noise" for the IRT results. This study also revealed two important factors of camera specifications for high-speed inspection by IRT as shorter integration time and higher pixel resolution.

Keywords

Acknowledgement

Supported by : West Nippon Expressway Company Limited

References

  1. AASHTO. (2013), Manual for Bridge Element Inspection, 1st Edition, with 2015 Interim Revisions.pdf.
  2. Abdel-qader, I., Yohali, S., Abudayyeh, O. and Yehia, S. (2008), "Segmentation of thermal images for non-destructive evaluation of bridge decks", 41, 395-405. https://doi.org/10.1016/j.ndteint.2007.12.003
  3. ASTM. (2014), Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography. ASTM International, West Conshohocken, PA, USA.
  4. Catbas, F.N., Hiasa, S., Khuc, T., Matsumoto, M. and Mitani, K. (2015), Development , Implementation and Evaluation of Image-based Technologies for Civil Infrastructure Systems. Report Submitted to West Nippon Expressway Company limited (NEXCO-West), Osaka, Japan.
  5. Cheng, C.C., Cheng, T. and Chiang, C. (2008), "Defect detection of concrete structures using both infrared thermography and elastic waves", Autom. Constr., 18, 87-92. https://doi.org/10.1016/j.autcon.2008.05.004
  6. D. Everett, T., Weykamp, P., Capers, H.A., Cox, W.R., Drda, T.S., Lawrence, H., Jensen, P., Juntunen, D.A., Kimball, T. and Washer, G.A. (2008), Bridge Evaluation Quality Assurance in Europe. FHWA, Washington, D.C., FHWA-PL-08-016.
  7. FHWA. (2013), "Memorandum 'Collection of Element Level Data for National Highway System Bridges''', .
  8. FHWA. (2014), "Highway Bridges by State and Highway System 2014", .
  9. FHWA. (2015), '''Highway Bridges by Deck Structure Type 2015''', (Apr. 27, 2016).
  10. FHWA, and FTA. (2014), 2013 Status of the Nation's Highways, Bridges, and Transit: Conditions & Performance.
  11. FLIR. (2013), The Ultimate Infrared Handbook for R&D Professionals. FLIR AB.
  12. FLIR. (2015), "Cooled or Uncooled?" FLIR Systems, Inc (As of 2015), .
  13. GPO. (2015), "Electronic Code of Federal Regulations", U.S. Government Publishing Officem, Subpart C, Title 23, 650.311, .
  14. Gucunski, N., Kee, S., La, H., Basily, B. and Maher, A. (2015), "Delamination and concrete quality assessment of concrete bridge decks using a fully autonomous RABIT platform", Struct. Monit. Maint., 2(1), 19-34. https://doi.org/10.12989/SMM.2015.2.1.019
  15. Gucunski, N., Nazarian, S., Yuan, D. and Kutrubes, D. (2013), Nondestructive Testing to Identify Concrete Bridge Deck Deterioration. Transportation Research Board, SHRP 2 Report S2-R06A-RR-1, Washington, D.C., USA.
  16. Hashimoto, K. and Akashi, Y. (2010), "Points to consider for photography by infrared cameras with different wavelength detection region", Proceedings of the 65th JSCE Annual Meeting, Japan Society of Civil Engineers (JSCE), Sapporo, Japan, VI-160.
  17. Hiasa, S., Watase, A., Birgul, R., Matsumoto, M., Mitani, K. and Catbas, F.N. (2014). "Utilizing infrared technologies as a non-destructive evaluation for maintenance of concrete structures", Proceedings of the 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014, CRC Press/Balkema, Leiden, Netherlands.
  18. Kee, S.H., Oh, T., Popovics, J.S., Arndt, R.W. and Zhu, J. (2012), "Nondestructive bridge deck testing with air-coupled impact-echo and infrared thermography", J. Bridge Eng., 17(6), 928-939. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000350
  19. Koch, C., Georgieva, K., Kasireddy, V., Akinci, B. and Fieguth, P. (2015), "A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure", Adv. Eng. Informatics, 29(2), 196-210. https://doi.org/10.1016/j.aei.2015.01.008
  20. Maierhofer, C., Brink, A., Ro, M. and Wiggenhauser, H. (2005), "Quantitative impulse-thermography as non-destructive testing method in civil engineering - Experimental results and numerical simulations", 19, 731-737. https://doi.org/10.1016/j.conbuildmat.2005.06.002
  21. Matsumoto, M., Mitani, K. and Catbas, F.N. (2012). "Bridge assessment methods using image processing and infrared thermography", 28th US - Japan Bridge Engineering Workshop.
  22. Matsumoto, M., Mitani, K. and Catbas, F.N. (2015), "NDE for Bridge Assessment using Image Processing and Infrared Thermography The pilot Project", Transportation Research Board 94th Annual Meeting, TRB, Washington, D.C., USA, No. 15-5620.
  23. MLIT. (2014), "The present situation of road structures (Bridges)", Road Bureau, Ministry of Land, Infrastructure, Transport and Tourism, Japan, Tokyo, Japan.
  24. MLTI. (2014), "Manual for Periodic Bridge Inspection", Road Bureau, Ministry of Land, Infrastructure, Transport and Tourism, Japan, Tokyo, Japan.
  25. Nakamura, S., Takaya, S., Maeda, Y., Yamamoto, T. and Miyagawa, T. (2013), "Spalling time prediction by using infrared thermography", J. Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), 69(4), 450-461. https://doi.org/10.2208/jscejmcs.69.450
  26. Nishikawa, T., Hirano, A. and Kamada, E. (2000), "Experimental study on thermography method for external wall removement finished with ceramic tile", Architectural Institute of Japan, 529, 29-35.
  27. Oh, T., Kee, S., Arndt, R.W., Popovics, J.S., Asce, M. and Zhu, J. (2013), "Comparison of NDT methods for assessment of a concrete bridge deck", J. Eng. Mech. - ASCE, 139, 305-314. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000441
  28. OLRC. (2012), Title 23, United States Code. Office of the Law Revision Counsel of the United States House of Representatives.
  29. Public Law 112-141. (2012), Moving Ahead for Progress in the 21st Century Act (MAP-21).
  30. Vaghefi, K., Ahlborn, T. (Tess) M., Harris, D.K. and Brooks, C.N. (2015), "Combined imaging technologies for concrete bridge deck condition assessment", J. Perform. Constr. Fac., 29(4), 04014102. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000465
  31. Washer, G., Fenwick, R. and Bolleni, N. (2009), Development of Hand-held Thermographic Inspection Technologies. Report No. OR10-007.
  32. Washer, G., Fenwick, R. and Bolleni, N. (2010), "Effects of Solar Loading on Infrared Imaging of Subsurface Features in Concrete", J. Bridge Eng., 15, 384-390. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000117
  33. Watase, A., Birgul, R., Hiasa, S., Matsumoto, M., Mitani, K. and Catbas, F.N. (2015), "Practical identification of favorable time windows for infrared thermography for concrete bridge evaluation", Constr. Build. Mater., 101, 1016-1030. https://doi.org/10.1016/j.conbuildmat.2015.10.156
  34. Wu, L., Mokhtari, S., Nazef, A., Nam, B. and Yun, H. (2014), "Improvement of crack-detection accuracy using a novel crack defragmentation technique in image-based road assessment", J. Comput. Civil Eng., 30(1), 04014118.
  35. Yehia, S., Abudayyeh, O., Nabulsi, S. and Abdelqader, I. (2007), "Detection of common defects in concrete bridge decks using nondestructive evaluation techniques", J. Bridge Eng., 12, 215-225. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:2(215)

Cited by

  1. A data processing methodology for infrared thermography images of concrete bridges vol.190, 2017, https://doi.org/10.1016/j.compstruc.2017.05.011
  2. Application of infrared camera to bituminous concrete pavements: measuring vehicle vol.236, 2017, https://doi.org/10.1088/1757-899X/236/1/012104
  3. Experimental and numerical studies for suitable infrared thermography implementation on concrete bridge decks vol.121, pp.None, 2016, https://doi.org/10.1016/j.measurement.2018.02.019
  4. Technology Leveraging for Infrastructure Asset Management: Challenges and Opportunities vol.5, pp.None, 2019, https://doi.org/10.3389/fbuil.2019.00061
  5. Hazard analysis and monitoring for debris flow based on intelligent fuzzy detection vol.7, pp.1, 2016, https://doi.org/10.12989/smm.2020.7.1.059
  6. Thermografie zur Erfassung von Schäden an Brückenbauwerken vol.97, pp.11, 2016, https://doi.org/10.1002/bate.201800057
  7. Monitoring bond-slip behavior of CFRP-RCESC beams using piezoelectric active sensing method vol.2, pp.1, 2016, https://doi.org/10.1186/s43251-021-00046-7
  8. Critical review of data-driven decision-making in bridge operation and maintenance vol.18, pp.1, 2016, https://doi.org/10.1080/15732479.2020.1833946