DOI QR코드

DOI QR Code

Design and fabrication of SSPA module in Ku band for satellite terminals

Ku 대역 위성단말기용 SSPA 모듈 설계 및 제작

  • Received : 2016.07.09
  • Accepted : 2016.08.05
  • Published : 2016.08.31

Abstract

In this paper, a 10W GaN MMIC was designed and fabricated using the Ku-band SSPA module. For Design and fabrication of the SSPA module using Rogers(RO4003C) substrate was used for Branch-line structure. SSPA modules on budget Divider/Combiner was designed and fabricated less than the maximum insertion loss - 0.7dB. In addition, because it must be applied to the structural nature of GaN MMIC Gate Bias-Drain Bias circuit was implemented to apply the Gate-Drain sequential circuit, implemented the RF Power Detect, Temperature Detect, HPA On/Off function. Design and fabrication Ku-band SSPA Module got the measurement results that satisfy a maximum output of 15.6W, Gain 45.7dB, 19.0% efficiency.

본 논문에서는 10W급 GaN MMIC를 이용하여 Ku-band SSPA 모듈을 설계 및 제작하였다. 설계 및 제작한 SSPA 모듈의 분배/합성을 위해 Rogers(RO4003C)기판을 이용하여 Branch-line 구조를 이용하였다. SSPA 모듈 버짓상 Divider/Combiner는 삽입손실이 최대 -0.7dB 이하로 설계 및 제작하였다. 또한 GaN MMIC 구조 특성상 Gate Bias-Drain Bias로 인가되어야 하기 때문에 Gate-Drain 순차회로를 적용한 Bias 회로를 구현하였으며, RF Power Detect, Temperature Detect, HPA On/Off 기능등을 구현하였다. 설계 제작된 Ku-band SSPA는 최대 출력 15.6W, Gain 45.7dB, 효율 19.0%로 만족하는 측정 결과를 얻었다.

Keywords

References

  1. K. Datta, J. Roderick, and H. Hashemi, "A 22.4dBm Two-way Wilkinson Power Combined Q-Band SiGe Class-E Power Amplifier with 23% Peak PAE" 2012 IEEE Compound Semiconductor Integrated Circuit Symp. (CSICS), Oct. 2012.
  2. A. Abbosh and B. Henin, "Planar wideband inphase power divider/combiner using modified Gysel structure" IET Microwaves, Antennas & Propagation, vol. 7, July 2013, pp.783-787. https://doi.org/10.1049/iet-map.2013.0037
  3. L. Chongzhe and D. Ricketts, "A low-loss, impedance matched ${\lambda}$/4 compact T-junction power combiner," 2012 7th European EuMIC, Oct. 2012, pp. 147-150.
  4. A. Wentzel, V. Subramanian, A. Sayed, and G. Boeck, "Novel Broadband Wilkinson Power Combiner," 2006 36th European Microwave Conf., Sept. 2006, pp. 212-215.
  5. N. Feng, F. Jianhong, F. Hao, W. Chaoyang, and L. Jianwei, "Design of an X-band High Power Solid State Power Ampilfier Based on GaN HEMT," 2010 Int. Conf. on Microwave and Millimeter Wave Technology (ICMMT), May 2010, pp. 1916-1918.
  6. Ryung-sep Koo, "A Design for Solid-state Rader SSPA with Sequential Bias Circuits," Journal of the Korea Institute of Information and Communication Engineering, vol. 17, no. 11, Nov. 2013., pp.2479-2485 https://doi.org/10.6109/jkiice.2013.17.11.2479
  7. Ki-Won Kim, Ju-Young Kwack, Samuel Cho, "A Design of High Power Pulsed Solid State Power Amplifier for S-band RADAR System Using GaN HEMT," Journal of the Korea Academia-Indstrial cooperation Society (JKAIS):Proceedings of the KAIS Fall Conference, 2010., pp.168-171