Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Deformation Induced Martensite on the Damping Capacity of Fe-26Mn-4Co-2Al Alloy

Fe-26Mn-4Co-2Al 합금의 감쇠능에 미치는 가공 유기 마르텐사이트의 영향

  • Jeong, Kyu-Seong (Department of Metallurgical Engineering, Pukyong National University) ;
  • Kang, Chang-Yong (Department of Metallurgical Engineering, Pukyong National University)
  • 정규성 (부경대학교 금속공학과) ;
  • 강창룡 (부경대학교 금속공학과)
  • Received : 2016.08.05
  • Accepted : 2016.08.18
  • Published : 2016.09.27
Download PDF
⟨ Previous Next ⟩

Abstract

This study was carried out to investigate the effect of deformation induced martensite on the damping capacity of Fe-26Mn-4Co-2Al damping alloy. ${\alpha}^{\prime}$ and ${\varepsilon}$-martensite were formed by cold working, and; deformation induced martensite was formed with according to the specific direction and the surface relief. With an increasing degree of cold rolling, the volume fraction of ${\alpha}^{\prime}$-martensite increased rapidly, while the volume fraction of ${\varepsilon}$-martensite decreased after rising to a maximum value at a specific level of cold rolling. Damping capacity was increased, and then decreased with an increasing of the degree of cold rolling. Damping capacity was influenced greatly by the volume fraction of ${\varepsilon}$-martensite formed by cold working, but the effect of the volume fraction of ${\alpha}^{\prime}$-martensite have a actually on effect on the damping capacity.

Keywords

References

  1. N. Chiba, ISIJ., 71, 1742 (1985).
  2. K. K. Lee, W. Y. Jang, S. H. Baik, M. C. Shin and C. S. Choi, Scr Mater., 37, 943 (1997). https://doi.org/10.1016/S1359-6462(97)00198-X
  3. M. K. Kwon and C. Y. Kang, Korean J. Mater. Res., 24, 1 (2014). https://doi.org/10.3740/MRSK.2014.24.1.1
  4. Y. H. Kim, S. H. Lee, S. G. Kim and C. Y. Kang, Korean J. Mater. Res., 25, 9 (2015). https://doi.org/10.3740/MRSK.2015.25.1.9
  5. H. V. Panossian, ASME., 114, 101 (1992).
  6. H. Sahashi, I. S. Kim, C. Y. Kang, N. Igata and K. Miyahara, Kinzoku., 74, 16 (2004).
  7. D. Birchon, D. E. Bromley and D. Healey, Met. Sci. J., 2, 41 (1968).
  8. Y. K. Lee, J. H. Jun and C. S. Choi, ISIJ., 37, 1023 (1997). https://doi.org/10.2355/isijinternational.37.1023
  9. H. Okada, H. Sahashi, I. S. Kim, C. Y. Kang, N. Igata and K. Miyahara, Mater. Sci., 370, 519 (2004).
  10. C. Y. Kang, J. H. Eom and H. J. Kim, Korean J. Met. Mater., 45, 157 (2007).
  11. R. L. Miller, Trans. ASM., 57, 892 (1964).
  12. A. J. Bogers and W. G. Rurgers, Acta Metall., 12, 255 (1964). https://doi.org/10.1016/0001-6160(64)90194-4
  13. JA Venables, Phil. Mag., 7, 35 (1961).
  14. C. Y. Kang and J. H. Sung, J. Korean Soc. Heat Treat., 4, 44 (1991).
  15. J. H. Jun, Y. K. Lee and C. S Choi, Korean J. Met. Mater., 33, 1600 (1995).
  16. D. U. Son, J. H. Kim, I. S. Kim, K. Miyahara, J. H. Sung and C. Y. Kang, Korean J. Met. Mater., 42, 621 (2004).