DOI QR코드

DOI QR Code

Development of a Software Program for the Automatic Calculation of the Pulp/Tooth Volume Ratio on the Cone-Beam Computed Tomography

  • Lee, Hoon-Ki (Department of Oral Medicine and Oral Diagnosis, School of Dentistry, Seoul National University) ;
  • Lee, Jeong-Yun (Department of Oral Medicine and Oral Diagnosis, School of Dentistry, Seoul National University)
  • 투고 : 2016.06.03
  • 심사 : 2016.09.23
  • 발행 : 2016.09.30

초록

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

키워드

참고문헌

  1. Cameriere R, De Luca S, Aleman I, Ferrante L, Cingolani M. Age estimation by pulp/tooth ratio in lower premolars by orthopantomography. Forensic Sci Int 2012;214:105-112. https://doi.org/10.1016/j.forsciint.2011.07.028
  2. Fritsch FL, Willershausen B, Gleissner C. Human dental age estimation by cone beam computed tomography-an in vitro study. J Forensic Odontostomatol 2013;31 Suppl 1:149-150.
  3. Star H, Thevissen P, Jacobs R, Fieuws S, Solheim T, Willems G. Human dental age estimation by calculation of pulp-tooth volume ratios yielded on clinically acquired cone beam computed tomography images of monoradicular teeth. J Forensic Sci 2011;56 Suppl 1:S77-S82. https://doi.org/10.1111/j.1556-4029.2010.01633.x
  4. Vandevoort FM, Bergmans L, Van Cleynenbreugel J, et al. Age calculation using X-ray microfocus computed tomographical scanning of teeth: a pilot study. J Forensic Sci 2004;49:787-790.
  5. Yang F, Jacobs R, Willems G. Dental age estimation through volume matching of teeth imaged by cone-beam CT. Forensic Sci Int 2006;159 Suppl 1:S78-S83. https://doi.org/10.1016/j.forsciint.2006.02.031
  6. Jeon HM, Kim JH, Heo JY, Ok SM, Jeong SH, Ahn YW. Age estimation by radiological measuring pulp chamber of mandibular first molar in Korean adults. J Oral Med Pain 2015;40:146-154. https://doi.org/10.14476/jomp.2015.40.4.146
  7. Lee TH, Hong JH, Lee SS, Kwon JS, Choi JH. Validation of age estimation methods using pulpal volume changes in radiographs for Korean adults. J Oral Med Pain 2014;39:69-77. https://doi.org/10.14476/jomp.2014.39.2.69
  8. Lascala CA, Panella J, Marques MM. Analysis of the accuracy of linear measurements obtained by cone beam computed tomography (CBCT-NewTom). Dentomaxillofac Radiol 2004;33:291-294. https://doi.org/10.1259/dmfr/25500850
  9. Jianzhuang L, Wenqing L, Yupeng T. Automatic thresholding of gray-level pictures using two-dimension Otsu method. Paper presented at: 1991 International Conference on Circuits and Systems; 1991 Jul 16-17; Shenzhen, China.
  10. Farrell J. Object-oriented programming using C++. Boston: Course Technology Press; 2008.
  11. Mery D. Crossing line profile: a new approach to detecting defects in aluminium die casting. Image analysis. Berlin: Spronger; 2003. pp. 725-732.
  12. Tomasi C, Manduchi R. Bilateral filtering for gray and color images. Paper presented at: the Sixth International Conference on Computer Vision; 1998 Jan 4-7; Bombay, India.
  13. Otsu N. A threshold selection method from gray-level histograms. IEEE Trans Syst Man Cyb 1979;9:62-66. https://doi.org/10.1109/TSMC.1979.4310076
  14. Bradley D, Roth G. Adaptive thresholding using the integral image. J Graph Tool 2007;12:13-21. https://doi.org/10.1080/2151237X.2007.10129236
  15. Canny J. A computational approach to edge detection. IEEE Trans Pattern Anal Mach Intell 1986;8:679-698.
  16. Chan FY, Lam FK, Zhu H. Adaptive thresholding by variational method. IEEE Trans Image Process 1998;7:468-473. https://doi.org/10.1109/83.661196
  17. Lee JS. Digital image enhancement and noise filtering by use of local statistics. IEEE Trans Pattern Anal Mach Intell 1980;2:165-168.