Journal of Korea Society of Digital Industry and Information Management (디지털산업정보학회논문지)

Korea Society of Digital Industry and Information Management (디지털산업정보학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Transition Metal Oxides Addition on Yttria - stabilized Zirconia for improving Physical and Mechanical Properties

  • Received : 2016.08.16
  • Accepted : 2016.09.12
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Mechanical properties of Y2O3-containing tetragonal ZrO2 polycrystals(Y-TZP) were investigated. Several additives were used to modify the hardness and fracture toughness of Y-TZP. The effects of these individual additives were discussed and their interactions were also analysed. Each additive, such as CoO, Fe2O3, MnO2 was found to deteriorate the mechanical properties of Y-TZP when it was used singly. But the fracture toughness of Y-TZP was significantly improved when these additives and Al2O3 were added in combination at a certain ratio. The addition of CoO, Fe2O3 and MnO2 into Y-TZP resulted in the more complex behavior of fracture toughness and hardness. The specimen with 1.5 wt%-Fe2O3, 3.0 wt% -Al2O3 and 1.5 wt%-CoO showed the monoclinic to tetragonal phase ratio of 18% and the highest toughness of $10.8MPa{\cdot}m1/2$ with Vickers hardness of 1201 kgf/mm2. However, the toughness decreased as the ratio increased and macrocracks developed beyond the ratio of 25%. Sample No. 16 is improved high Physical and Mechanical Properties.

Keywords

References

  1. O. Yamamoto and Y. Taketa, "Electrical Conductivity of Polycrystalline Tetragonal Zirconia $ZrO_2-M_2O_3$ (M=Sc, Y, Yb)," J. Mater. Sci. Lett., 8, 1989, pp. 198-200. https://doi.org/10.1007/BF00730724
  2. P. Duran and P. Recio, "Preparation, Sintering and Properties of Translucent $Er_2O_3$- Doped Tetragonal Zirconia," J.Am. Ceram. Soc., 72(11), 1989, pp. 2088-2093. https://doi.org/10.1111/j.1151-2916.1989.tb06036.x
  3. T. Masaki, "Mechanical Properties of Toughened $ZrO_2-Y_2O_3$ Ceramics," J.Am.Ceram. Soc., 69(8), 1986, pp. 638-640. https://doi.org/10.1111/j.1151-2916.1986.tb04823.x
  4. E.C. Subbarao, "Zirconia-an Overview, in Science and Technology of Zirconia," edited by A.H.Heuer and L.W. Hobbs, The American Ceramic Society, Columbus, Ohio, 1981, pp. 1-24.
  5. W.Pada and K.Haberko, "Zirconia Stabilized with a Mixture of the Rare Earth Oxides," J.Eur.Ceram. Soc., 10, 1992, pp. 453-459. https://doi.org/10.1016/0955-2219(92)90020-E
  6. M.V. Swain and L.R. Rose, "Strength Limitation of Transformation Toughened Zirconia Alloys," J. Am. Ceram. Soc., 69(7), 1986, pp. 511-518. https://doi.org/10.1111/j.1151-2916.1986.tb04785.x
  7. D.Michel, L.Mazerolles and M.Perezjorba, "Fracture of Metastable Tetragonal Zirconia Crystals," J.Mater. Sci, 18, 1983, pp. 2618-2628. https://doi.org/10.1007/BF00547578
  8. 정의영, "반도체 산업의 성과 분석을 통한 메모리 산업의 미래 전략 도출," 디지털산업정보학회, 디지털산업정보학회논문지, 제11권, 제4호, 2015, pp. 1-12. https://doi.org/10.17662/ksdim.2015.11.4.001
  9. 박상혁, 박정선, 이명관, "성공적인 6차산업을 위한 가치사슬 모형과 빅데이터 활용 방안," 디지털산업정보학회, 디지털산업정보학회논문지, 제11권, 제2호, 2015, pp. 141-152. https://doi.org/10.17662/KSDIM.2015.11.2.141
  10. 김정주, "부분안정화 지르코니아 요업체의 상변태에 따른 미세구조 및 기계적 성질," 요업재료의 과학과 기술, 3(3), 1988, pp. 217-223.
  11. J. H. Lee, Y.B. Lee, Y.W. Kim and H.C. Park, "Fabrication and Characteristics of Y-TZP/Ce-TZP Structural Ceramics," J. Kor. Ceram. Soc., 33(10), 1996, pp. 1177-1185.