DOI QR코드

DOI QR Code

PRO 분리막 및 모듈성능에 지지체가 미치는 영향

The effect of backing layer for pro membranes and modules

  • 한만재 (도레이케미칼(주) 기술연구소) ;
  • 전은주 (도레이케미칼(주) 기술연구소) ;
  • 심연주 (도레이케미칼(주) 기술연구소) ;
  • 이종화 (도레이케미칼(주) 기술연구소)
  • 투고 : 2016.08.08
  • 심사 : 2016.09.26
  • 발행 : 2016.10.31

초록

There has been increasing global interest in the environmental pollution problems produced by fossil fuel consumption and greenhouse gas emissions. In order to tackle these issues, new renewable energy such as solar, wind, bio gas, fuel cell and pressure retarded osmosis(PRO) have been developed extensively. Among these energy sources, PRO is one of the salinity gradient power generation methods. In PRO, energy is obtained by the osmotic pressure generated from the concentration difference between high and low concentration solutions separated by a semipermeable membrane. The development for high power density PRO membranes is imperative with the purpose of commercialization. This study investigates development of thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on power density was identified, and the characteristic factors of PRO membranes was determined. Different backing layers were used to improve power density. As expected, the PRO membrane with more porous backing layer showed higher power density.

키워드

참고문헌

  1. A. Tiraferri, N.Y. Yip, W.A. Phillip, J.D. Schiffman, M. Elimelech, (2011), Relating performance of thin-film composite forward osmosis membranes to support layer formation and structure, J. Membr. Sci., 367, 340-352. https://doi.org/10.1016/j.memsci.2010.11.014
  2. A.K. Ghosh, B.-H. Jeong, X. Huang, E.M.V. Hoek, (2008), Impacts of reaction and curing conditions on polyamide composite reverse osmosis membrane properties, J. Membr. Sci. 311, 34-45. https://doi.org/10.1016/j.memsci.2007.11.038
  3. A.K. Ghosh, E.M.V. Hoek, (2009), Impacts of support membrane structure and chemistry on polyamide-polysulfone interfacial composite membrnaes, J. Membr. Sci., 336, 140-148. https://doi.org/10.1016/j.memsci.2009.03.024
  4. J.L. Prante, J.A. Ruskowitz, A.E. Childress, A. Achilli, (2014), An integrated low-energy approach to seawater desalination, Appl. Energy, 120, 104-114. https://doi.org/10.1016/j.apenergy.2014.01.013
  5. K.L. Lee, R.W. Baker, H.K. Lonsdale, (1981), Membranes for power generation by pressure-retarded osmosis, J. Membr. Sci., 8, 141-171. https://doi.org/10.1016/S0376-7388(00)82088-8
  6. L.F. Greenlee, D.F. Lawler, B.D. Freeman, B. Marrot, P. Moulin, (2009), Water sources, technology and today's challenges, Water Res., 43, 2317-2348. https://doi.org/10.1016/j.watres.2009.03.010
  7. M. Elimelech, W.A. Phillip, (2011), The future of seawater desalination: Energy, technology and the environment, Science, 333, 712-717. https://doi.org/10.1126/science.1200488
  8. M. Mulder, (1996), Basic principles of membrane technology, Kluver Academic Publishers, Dordrecht.
  9. S. Loeb, L. Titelman, E. Korngold, J. Freiman, (1997), Effect of porous surpport fabric on osmosis through a Loeb-Sourirajan type asymmetric membrane, J. Membr. Sci.,129, 243-249. https://doi.org/10.1016/S0376-7388(96)00354-7
  10. S. Loeb., (2002), Large-scale power production by pressureretarded osmosis, using river water and sea water passing through spiral modules, Desalination, 143, 115-122. https://doi.org/10.1016/S0011-9164(02)00233-3
  11. T. Thorsen, T. Holt, (2009), The potential for power retarded osmosis, J. Membr. Sci., 335, 103-110. https://doi.org/10.1016/j.memsci.2009.03.003
  12. T. Thorsen, T. Holt, (2009), The potential for power production from salinity gradients by pressure retarded osmosis, J. Membr. Sci., 335, 103-110. https://doi.org/10.1016/j.memsci.2009.03.003
  13. W.A. Phillip, J.S. Yong, M. Elimelech, (2010), Reverse draw solute permeation in forward osmosis: Modeling and experiments, Environ. Sci. Technol., 44, 5170-5176. https://doi.org/10.1021/es100901n

피인용 문헌

  1. The study of a novel SWRO-PRO hybrid desalination technology vol.32, pp.4, 2018, https://doi.org/10.11001/jksww.2018.32.4.317