DOI QR코드

DOI QR Code

Behaviour of GFRP composite plate under ballistic impact: experimental and FE analyses

  • Ansari, Md. Muslim (Department of Civil Engineering, Indian Institute of Technology Roorkee) ;
  • Chakrabarti, Anupam (Department of Civil Engineering, Indian Institute of Technology Roorkee)
  • 투고 : 2016.05.12
  • 심사 : 2016.09.21
  • 발행 : 2016.12.10

초록

In this paper, experimental as well as numerical analysis of Glass Fiber Reinforced Polymer (GFRP) laminated composite has been presented under ballistic impact with varying projectile nose shapes (conical, ogival and spherical) and incidence velocities. The experimental impact tests on GFRP composite plate reinforced with woven glass fiber ($0^{\circ}/90^{\circ}$)s are performed by using pneumatic gun. A three dimensional finite element model is developed in AUTODYN hydro code to validate the experimental results and to study the ballistic perforation characteristic of the target with different parametric variations. The influence of projectile nose shapes, plate thickness and incidence velocity on the variation of residual velocity, ballistic limit, contact force-time histories, energy absorption, damage pattern and damage area in the composite target have been studied. The material characterization of GFRP composite is carried out as required for the progressive damage analysis of composite. The numerical results from the present FE model in terms of residual velocity, absorbed energy, damage pattern and damage area are having close agreement with the results from the experimental impact tests.

키워드

참고문헌

  1. Ansari, M.M. and Chakrabarti, A. (2016), "Impact behaviour of FRP composite plate under low to hyper velocity impact", Compos. Part B, 95, 462-474. https://doi.org/10.1016/j.compositesb.2016.04.021
  2. Ansari, M.M. and Chakrabarti, A. (2016), "Progressive damage of GFRP composite plate under ballistic impact: experimental and numerical study", Polymer Polymer Compos., 24(7), 579-586.
  3. ANSYS/AUTODYN 14.5 (2012), User's manual, ANSYS Inc. South Pointe.
  4. Bilingardi. G. and Vadori, R. (2003), "Influence of the laminate thickness in low velocity impact behavior of composite material plate", Compos. Struct., 61, 27-38. https://doi.org/10.1016/S0263-8223(03)00027-8
  5. Cantwell, W.J. and Morton, J. (1989), "A comparison of the low and high velocity impact response of CFRP", Compos., 20(6), 545-551. https://doi.org/10.1016/0010-4361(89)90913-0
  6. Evci, C. and Gulgec, M. (2012), "An experimental investigation on the impact response of composite materials", Int. J. Impact. Eng., 43, 40-51. https://doi.org/10.1016/j.ijimpeng.2011.11.009
  7. Hayhurst, C.J., Livingstone, I.H.G., Clegg, R.A. et al. (2001), "Ballistic limit evaluation of advanced shielding using numerical simulations", Int. J. Impact Eng., 26, 309-320. https://doi.org/10.1016/S0734-743X(01)00100-2
  8. Hossainzadeh, R., Shokrieh, M.M. and Lessard, L. (2006), "Damage behavior of fiber reinforced composite plates subjected to drop weight impacts", Compos. Sci. Tech., 66(1), 61-68. https://doi.org/10.1016/j.compscitech.2005.05.025
  9. Johnson, G.R. and Cook, W.H. (1985), "Fracture characteristics of three metals subjected to various strains, strains rates, temperature and pressure", Eng. Frac. Mech., 21, 31-48. https://doi.org/10.1016/0013-7944(85)90052-9
  10. Jordan, J.B. and Naito, C.J. (2014), "An experimental investigation of the effect of nose shape on fragments penetrating GFRP", Int. J. Impact Eng., 63, 63-71. https://doi.org/10.1016/j.ijimpeng.2013.08.002
  11. Kumar, S., Gupta, D.S., Singh, I. and Sharma, A. (2010), "Behavior of Kevlar/Epoxy Composite Plates under Ballistic Impact", J. Rein. Plast. Compos., 29, 2048-2064. https://doi.org/10.1177/0731684409343727
  12. Landa, B.P. and Olivers, F.H. (1995). "An analytical model to predict impact behavior of soft armor", Int. J. Impact Eng., 16, 455-466. https://doi.org/10.1016/0734-743X(94)00054-Z
  13. Nasimuddin, P.E. and Vaidya, U. (2005), "Ballistic testing of polymer composites to manufacture emergency safe house shelters", J. Compos. Constr., 9(4), 369-375. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:4(369)
  14. Sabet, A., Fagih, N. and Beheshty, M.H. (2011), "Effect of reinforcement type on high velocity impact response of GRP plates using a sharp tip projectile", Int. J. Impact Eng., 38, 715-722. https://doi.org/10.1016/j.ijimpeng.2011.03.004
  15. Silva, M.A.G., Cismaciu, C. and Chiorean, C.G. (2005), "Numerical simulation of ballistic impact on composite laminates", Int. J. Impact Eng., 31, 289-306. https://doi.org/10.1016/j.ijimpeng.2004.01.011
  16. Talib, A.R.A., Abbud, L.H., Ali, A. and Mustapha, F. (2012), "Ballistic impact performance of Kevlar-29 and $Al_2O_3$ powder/epoxy targets under high velocity impact", Mater. Des., 35, 12-29. https://doi.org/10.1016/j.matdes.2011.08.045
  17. Tham, C.Y., Tan, V.B.C. and Lee, H.P. (2008), "Ballistic impact of a Kevlar helmet: experimental and simulations", Int. J. Impact Eng., 35, 304-318. https://doi.org/10.1016/j.ijimpeng.2007.03.008
  18. Tiberkak, R., Bachene, M., Rechak, S. and Necib, B. (2008), "Damage prediction in composite plates subjected to low velocity impact", Compos. Struct., 83, 73-82. https://doi.org/10.1016/j.compstruct.2007.03.007
  19. Wen, H.M. (2000), "Predicting the penetration and perforation of FRP laminates struck normally by projectiles with different nose shapes", Compos. Struct., 49, 321-329. https://doi.org/10.1016/S0263-8223(00)00064-7
  20. Wen, H.M. (2001), "Penetration and perforation of thick FRP laminates", Compos. Sci. Tech., 61, 1163-1172. https://doi.org/10.1016/S0266-3538(01)00020-3
  21. Zhang, D., Sun, Y., Chen, L. and Pan, N. (2013), "A comparative study on low-velocity impact response of fabric composite laminates", Mater. Des., 50, 750-756. https://doi.org/10.1016/j.matdes.2013.03.044

피인용 문헌

  1. Effect of boundary condition and impactor nose angle on impact behaviour of FRP composite: Experimental and FE analyses vol.4, pp.9, 2017, https://doi.org/10.1016/j.matpr.2017.06.241
  2. Impact behaviour of GFRP and Kevlar/epoxy sandwich composite plate: Experimental and FE analyses vol.31, pp.2, 2017, https://doi.org/10.1007/s12206-017-0128-y
  3. Dynamic Response of Laminated GFRP Composite under Low Velocity Impact: Experimental and Numerical Study vol.173, 2017, https://doi.org/10.1016/j.proeng.2016.12.052
  4. Ballistic Performance of Unidirectional Glass Fiber Laminated Composite Plate under Normal and Oblique Impact vol.173, 2017, https://doi.org/10.1016/j.proeng.2016.12.053
  5. Localisation of embedded water drop in glass composite using THz spectroscopy vol.21, pp.6, 2018, https://doi.org/10.12989/sss.2018.21.6.751
  6. Mode-I fracture toughness of carbon fiber/epoxy composites interleaved by aramid nonwoven veils vol.31, pp.2, 2016, https://doi.org/10.12989/scs.2019.31.2.113
  7. Stochastic impact responses analysis of functionally graded plates vol.41, pp.11, 2016, https://doi.org/10.1007/s40430-019-2000-8
  8. Ballistic Performance Evaluation of Kevlar-Glass Fibre Hybrid Composite Laminate against Medium Velocity Impact vol.1165, pp.None, 2021, https://doi.org/10.4028/www.scientific.net/amr.1165.47