Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

A Numerical Study to Estimate the Lateral Responses of Steel Moment Frames Using Strain Data

변형률 데이터를 이용한 철골모멘트골조의 횡응답 예측을 위한 해석적 연구

  • 김시준 (경기대학교 플랜트건축공학과) ;
  • 최세운 (대구가톨릭대학교 건축학부)
  • Received : 2016.10.06
  • Accepted : 2016.10.17
  • Published : 2016.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the method to predict the lateral response by using strain data is presented on the steel moment frame. For this, the reliability of the proposed method by applying the example of five-story frame structure were verified. Using the strain value of columns, it predicted the lateral response of structure. It is assumed that all of four strain sensors for one column set up and the strain responses of both end of the column are utilized. The lateral response of member is calculated by using the slope deflection method. Also, using the acceleration response of the one layer, the stiffness of the rotation spring located in the supporting point is predicted. As a result, it was effective to understand the lateral displacement and acceleration responses and to predict local damage and location.

본 연구는 철골모멘트골조를 대상으로 변형률 기반 횡응답 예측 기법 제시한다. 기둥의 변형률 데이터를 이용하여 건물레벨의 횡응답을 예측한다. 변형률 데이터는 한 개의 기둥 당 총 4개의 변형률 센서가 설치된다고 가정하여 기둥의 양 단부의 변형률 응답 값을 이용한다. 양단부의 변형률 값을 통해 단부의 휨모멘트를 계산하고 이를 처짐각법에 적용하면 건물레벨의 횡응답을 예측할 수 있다. 또한 한 개층에 설치된 가속도계의 응답을 이용하여 지점에 위치한 회전스프링의 강성값을 예측하였다. 제시한 기법은 5층 1경간 철골모멘트골조 예제에 적용하여 그것의 신뢰성를 검증하였다. 횡변위 및 횡가속도에 대한 예측 응답이 비교값과 일치하는 결과를 얻었으며, 손상 여부 및 위치를 파악하는데 효과적임을 확인하였다. 반면 고유주기와 같은 동특성은 구조물의 손상을 파악하는데 한계가 있음을 확인하였다.

Keywords

References

  1. Brincker, R., Zhang, L., and Andersen, P. (2001), Modal Identification of Output-only Systems using Frequency Domain Decomposition. Smart Materials and Structures, 10, 441-445. https://doi.org/10.1088/0964-1726/10/3/303
  2. Chang, S. J., and Kim, N. S. (2008), Estimation of Displacement Response from the Measured Dynamic Strain Signals Using Mode Decomposition Technique. KSCE Journal of Civil Engineering, 28(4A), 507-515.
  3. Choi, E. S., Kang, D. H., Chung, W. S., and Kim, H. S. (2006), Estimation of Dynamic Displacement and Characteristics of A Simple Beam from FBG Sensor Signals. Journal of Korean Society of Steel Construction, 18(4), 503-514.
  4. Choi, S. W., and Park H. S. (2012), Multi-objective Seismic Design Method for Ensuring Beam-hinging Mechanism in Steel Frames. Journal of Constructional Steel Research, 74, 17-25. https://doi.org/10.1016/j.jcsr.2012.01.012
  5. Choi, S. W., Kim, Y., Lee, J., Hong, K., and Park, H. S. (2013), Minimum Column-to-beam Strength Ratios for Beam-hinge Mechanisms based on Multi-objective Seismic Design. Journal of Constructional Steel Research, 88, 53-62. https://doi.org/10.1016/j.jcsr.2013.05.004
  6. Hibbeler, R. C. (2011), Structural Analysis, Prentice Hall, 451-486.
  7. Kang, L. H., Kim, D. K., and Han, J. H. (2007), Estimation of Dynamic Structural Displacements Using Fiber Bragg Grating Strain Sensors. Journal of Sound and Vibration, 305, 534-542. https://doi.org/10.1016/j.jsv.2007.04.037
  8. Kim, N. S., and Cho, N. S. (2002), Estimation of Bridge Deflection Using Fiber Optic Bragg-grating Sensors. KSCE Journal of Civil Engineering, 22(6A), 1357-1366.
  9. Lee, H. M., and Park, H. S. (2009), Estimation of the Maximum Stress of a Beam-Column Based on Average Strains from Vibrating Wire Strain Gages, Proceeding of Architectural Institute of Korea, 29(1), 17-20.
  10. Lee, H. M., Kim, J. M., Sho, K., and Park, H. S. (2010), A Wireless Vibrating Wire Sensor Node for Continuous Structural Health Monitoring, Smart Materials and Structures, doi:10.1088/0964-1726/19/5/055004.
  11. Park, H. S., Park, K., Kim, Y., and Choi, S. W. (2015a), Deformation Monitoring of a Building Structure using a Motion Capture System. IEEE/ASME Transactions on Mechatronics, 20, 2276-2284. https://doi.org/10.1109/TMECH.2014.2374219
  12. Park, S. W., Park, H. S., Kim, J. H., and Adeli, H. (2015b), 3D Displacement Measurement Model for Health Monitoring of Structures using a Motion Capture System. Measurement, 59, 352-362. https://doi.org/10.1016/j.measurement.2014.09.063

Cited by

  1. 인공신경망을 이용한 철골모멘트골조 접합부의 회전강성 손상예측 vol.22, pp.1, 2016, https://doi.org/10.11112/jksmi.2018.22.1.107
  2. 기능성 첨가재를 적용한 급경사면용 녹생토의 경도 및 리바운드 특성 vol.19, pp.12, 2016, https://doi.org/10.5762/kais.2018.19.12.258