DOI QR코드

DOI QR Code

Design and Implementation of a Control System for the Phase Shift Full-bridge Converter of the On-board Charger for Electric Vehicles

전기자동차 탑재형 배터리 완속 충전기의 위상천이 풀-브릿지 컨버터 제어시스템 설계 및 구현

  • Lee, Jun Hyok (Dept. of Electronics Engineering, Kookmin University) ;
  • Jung, Kwang-Soon (Dept. of Secured Smart Electric Vehicles, Kookmin University) ;
  • Kim, Ho Kyung (Electronics R&D Center S/W Design Team, Yura Corporation) ;
  • Hong, Sung-Soo (Dept. of Secured Smart Electric Vehicles, Kookmin University) ;
  • Ahn, Hyun-Sik (Dept. of Electronics Engineering, Kookmin University)
  • Received : 2016.08.11
  • Accepted : 2016.09.27
  • Published : 2016.11.01

Abstract

In this paper, first, a linearized modeling of a phase shift full-bridge converter used in chargers of electric vehicles is derived by using state-space approach and transfer functions from the duty ratio to output voltage and the inductor current are also verified. second, control systems for the output voltage and the inductor current are designed using the root locus technique. It is illustrated by experimental results that the control performance on the output variables is satisfied with the designed digital control system based on a automobile qualified 32-bit microcontroller.

Keywords

References

  1. S. Y. Li, "Exploring the History of New Energy Vehicles,"Advances in Automation and Robolics, Vol. 2, pp. 141-146, 2011.
  2. M. Yilmaz and P. T. Krein, "Review of the impact of vehicle-to-grid technologies on distribution systems and utility interfaces," IEEE Trans. Power Electron, Vol. 28, pp. 2151-2169, 2012.
  3. K. J Joo, S.R Jang, F. K. A. Mostafa and G.H Rim, "Technical Trend of Electric Vehicle," KIEE 40th Annual Conference, pp. 947-948, 2009.
  4. Kim, Eun-Soo, and Yoon-Ho Kim. "A ZVZCS PWM FB DC/DC converter using a modified energy-recovery snubber." IEEE Transactions on Industrial Electronics 49.5 (2002): 1120-1127. https://doi.org/10.1109/TIE.2002.803237
  5. J.A. Sabate, V. Vlatkovic, R.B. Ridley, F.C. Lee and B.H Cho, "Design considerations for high-voltage high-power full-bridge zero-volatage-switched PWM converter", in Proc IEEE APEC, pp. 275-284, 1990
  6. S. Choudhury, "Average current mode controlled power factor correction converter Using TMS320LF2407A", Texas Instruments Application Note SPRA902A, pp. 1-14, 2005.
  7. Y. Y. Tzou, S. Y Hwang, H. J. Wu, and I. K. Wang, "Design and inpementation of and interactive digital controller development system," Industrial Electronics Society, IECON'89., 15th Annual Conference of IEEE, Vol. 4, pp. 792-798, 1989.
  8. Chae, H. J., et al. "3.3 kW on board charger for electric vehicle." Power Electronics and ECCE Asia (ICPE & ECCE), 2011 IEEE 8th International Conference on IEEE, 2011.
  9. D.S. Gautam, "An Automotive On-Board 3.3 kW Battery Charger for PHEV Application" IEEE Transactions on Vehicular Technology, Vol.61, No.8, pp. 3466-3474, 2012. https://doi.org/10.1109/TVT.2012.2210259
  10. V. Vlatkovic, J. A. Sabate, R. B. Ridley, F. C. Lee, and B. H. Cho, "Small-signal analysis of the phase-shifted PWM converter," IEEE Transaction on Power Electronics, Vol. 7, No. 1, pp. 128-130, 1992. https://doi.org/10.1109/63.124585
  11. G. Di Capua, S. A. Shirasavar, M. A. Hallworth, and N. Femia, "An enhanced model for small-signal analysis of the phase-shifted full-bridge converter," IEEE Trans. Power Electron., vol. 30, no. 3, pp. 1567-1576, 2015. https://doi.org/10.1109/TPEL.2014.2314241
  12. B. Choi, Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs. Hoboken, NJ, USA: Wiley, pp. 303-304, 2013.
  13. J. A. Sabate, V. Vlatkovic, R. Ridley, and F. C. Lee, "High-voltage, high-power, ZVS, full-bridge PWM converter employing an active switch," in IEEE Applied Pouser Electronics Conf Proc, pp. 158-163, 1991.