DOI QR코드

DOI QR Code

The New Active Voltage Clamp ZVS-PWM Resonant High-frequency Inverter

새로운 액티브 전압 클램프 ZVS-PWM 공진 고주파 인버터

  • Ahn, Yong-Wie (Hanryeo Electric Safety Management Co., Ltd) ;
  • Kim, Hong-Shin (Korea Water Resources Corporation) ;
  • Mun, Sang-Pil (Dept. of Electrical Engineering, Masan University) ;
  • Woo, Kyung-Il (Dept. of Electrical Engineering, Pukyong National University) ;
  • Park, Han-Seok (Dept. of Electrical Engineering, Pukyong National University)
  • Received : 2017.10.18
  • Accepted : 2017.11.22
  • Published : 2017.12.01

Abstract

In this paper, a ZVS-PWM high-frequency inverter with a PWM control function is applied to commercial system 220[Vrms], and a resonator type ZVS-PWM high-frequency inverter circuit with a fixed-two methods were proposed. The parameters of the transformer model equivalent circuit of a copier fixing device, which is an essential element in the parameter optimization of the proposed circuit, are obtained by using a high-frequency amplifier and its frequency characteristics are described. The proposed method compared to the existing single-ended ZVS-PFM high frequency inverter can suppress the voltage and current peak value of the power semiconductor switching device and reduce the switching loss. The efficiency of the proposed method itself is 98[%] at rated power output. Also, the efficiency of 96[%] can be obtained even at low output, so that the proposed high frequency inverter is very efficient inverter. The total efficiency from the commercial AC input to the inverter output is 93[%] at rated, which is considered efficient for use in copying machines. In addition, the diode bridge loss accounts for the largest portion of the overall system efficiency distribution. On the other hand, the nonparallel filter has a very low loss.

Keywords

References

  1. J. G. Cho, C. Y. Jeong, "Zero Voltage and Zero Current Switching Full Bridge PWM Converter Using Secondary Active Clamp," IEEE Trans. on Power Electronics, vol. 13, no. 4, 1998
  2. S. H. Lee, S. K. Lim, S. G. Song, "Design of New Current Full-Bridge Resonant Inverter for Induction Heating System," Journal of the Korean institute of illuminating and electrical installation engineers, vol. 26, no. 7, pp. 59-69, 2012. https://doi.org/10.5207/JIEIE.2012.26.7.059
  3. D. C. Shin, H. M. Kwon, K. H. Kim, Y. J. Kim, "A Study on the Development of Superheater Using High-Frequency Resonant Inverter for Induction Heating," The Transactions of the Korean Institute of Power Electronics, vol. 9, no. 2, pp. 119-125, 2004.
  4. Y. J. KIM, K. H. KIM, D. C. SHIN, "Electromagnetic Indirect Induction Fluid Heating System using Series Resonant PWM Inverter and Its Performance Evaluations," The Transactions of KIPE, vol. 7, no. 1, pp. 48-53, 2002.
  5. J. S. Lee, "(A) design of high frequency parallel-resonant inverter for induction heating," Department of Electrical Engineering, Graduate School of Industry, Pusan National University, pp. 3-25, 2005.
  6. B. S. Lee, "A Study on Development of Power Supply for High Frequency Induction Heating," Journal of Korea Society of Industrial Application, vol. 5, no. 3, pp. 179-186, 2002.
  7. J. M. Ho, M. T. LEE, "A novel PWM inverter control circuitry for induction heating," IEEE International Power Electronics Congress, vol. 10, pp. 113-119, 1996.
  8. S. H. Park, "A study on the characteristics of electric superheater using induction heating," Department of Electrical Engineering, The Graduate School Hoseo University, pp. 5-25, 2012.
  9. S. Llorente, F. Monterde, J. M. Burdio, and J. Acero, "A comparative study of resonant inverter topologies used in induction cookers," Applied Power Electronics Conference and Exposition, APEC, vol. 2, pp. 1168-1174, March 2002.