DOI QR코드

DOI QR Code

Electrochemical Study of Three Stainless Steel Alloys and Titanium Metal in Cola Soft Drinks

  • Peralta-Lopez, D. (Facultad de Ciencias Quimicas e Ingenieria, Universidad Autonoma del Estado de Morelos) ;
  • Sotelo-Mazon, O. (Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico (UNAM)) ;
  • Henao, J. (Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico (UNAM)) ;
  • Porcayo-Calderon, J. (CIICAp, Universidad Autonoma del Estado de Morelos) ;
  • Valdez, S. (Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico (UNAM)) ;
  • Salinas-Solano, G. (Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico (UNAM)) ;
  • Martinez-Gomez, L. (Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico (UNAM))
  • 투고 : 2017.07.13
  • 심사 : 2017.09.25
  • 발행 : 2017.12.31

초록

Stainless steels and titanium alloys are widely used in the medical industry as replacement materials. These materials may be affected by the conditions and type of environment. In the same manner, soft drinks are widely consumed products. It is of interest for dental industry to know the behavior of medical-grade alloys when these are in contact with soft drinks, since any excessive ion release can suppose a risk for human health. In the present study, the electrochemical behavior of three stainless steel alloys and pure titanium was analyzed using three types of cola soft drinks as electrolyte. The objective of this study was to evaluate the response of these metallic materials in each type of solution (cola standard, light and zero). Different electrochemical techniques were used for the evaluation of the alloys, namely potentiodynamic polarization, linear polarization, and open-circuit potential measurements. The corrosion resistance of the stainless-steel alloys and titanium in the cola soft drinks was provided by the formation of a stable passive film formed by metal oxides. Scanning electron microscopy was used as a complementary technique to reveal corrosion phenomena at the surface of the materials evaluated.

키워드

참고문헌

  1. A. Alrahlah, N. Silikas, and D. C. Watts, Dent. Mater., 2014, 30(2), 149-154. https://doi.org/10.1016/j.dental.2013.10.011
  2. A. Washio, A. Nakagawa, T. Nishihara, H. Maeda and C. Kitamura, J. Biomed. Mater. Res. Part B., 2015, 103(2), 373-380. https://doi.org/10.1002/jbm.b.33209
  3. A. Verstrynge, J. Van Humbeeck, G. Willems, Am. J. Orthod. Dentofac. Orthop., 2006, 130(4), 460-470 https://doi.org/10.1016/j.ajodo.2004.12.030
  4. M. Niinomi, Metall. Mater. Trans. A, 2002, 33(3), 477-486. https://doi.org/10.1007/s11661-002-0109-2
  5. J. A. Disegi, L. Eschbach, Injury, 2000, 31, D2-D6. https://doi.org/10.1016/S0020-1383(00)80015-7
  6. D.M. Brunette, P. Tengvall, M. Textor, P. Thomsen, Titanium in medicine: material science, surface science, engineering, biological responses and medical applications, Springer Science & Bussiness Media, (2012) 2-10.
  7. V. Kararia, P. Jain, S. Chaudhary, and N. Kararia, Contemp. Clin. Dent., 2015, 6(1), 44-50. https://doi.org/10.4103/0976-237X.149291
  8. Y.X. Zhang, M. Liu, Y. Chen, Q. Xu, Y. Luo, L.Q. Tang, Int. J. Electrochem. Sci., DOI: 10.20964/2017.01.45 2017.
  9. N. Mazinanian, I. O. Wallinder and Y. S. Hedberg, Corros. Sci. Technol., 2015, 14(4), 166-171. https://doi.org/10.14773/cst.2015.14.4.166
  10. H. Kaminaka, M. Abe, S. Matsumoto, K. Kimura, and H. Kamio, Nippon Steel & Sumitomo Metal Technical Report, No, 2014, 106, 34-40.
  11. D. S. Kong, Langmuir, 2008, 24(10), 5324-5331. https://doi.org/10.1021/la703258e
  12. H. Habazaki, K. Fushimi, , K. Shimizu, P. Skeldon, and G. E. Thompson, Electrochem. Commun., 2007, 9(5), 1222-1227. https://doi.org/10.1016/j.elecom.2006.12.023
  13. O. Concha, I. Castaneda, R. Guardian, A. Marban, D. Mayorga, K. Cuentas, and C. Menchaca-Campos, Int. J. Electrochem. Sci., 2015, 10, 6175-6186.
  14. S. Puntarulo, Mol. Aspects Med., 2005, 26(4), 299-312. https://doi.org/10.1016/j.mam.2005.07.001
  15. B. Halliwell, Annu. Rev. Nutr., 1996, 16, 33-50. https://doi.org/10.1146/annurev.nu.16.070196.000341
  16. C. S. Ramsden, T. J. Smith, B. J. Shaw and R. D. Handy, Ecotoxicology, 2009, 18(7), 939-951. https://doi.org/10.1007/s10646-009-0357-7
  17. H. A. Schroeder, J. J. Balassa and W. H. Jr. Vinton, J. Nutr., 1964, 83, 239-250. https://doi.org/10.1093/jn/83.3.239
  18. T. Terachi, T. Yamada, T. Miyamoto, K. Arioka, and K. Fukuya, J. Nucl. Sci. Technol., 2008, 45(10), 975-984. https://doi.org/10.1080/18811248.2008.9711883
  19. S. M. Castro, M. J. Ponces, J. D. Lopes, M. Vasconcelos and M. C. F. Pollmann, J. Dent. Sci., 2015, 10(1), 1-7 https://doi.org/10.1016/j.jds.2014.07.002
  20. I. Gurrappa, D. Venugopala Reddy, J. Alloys Compd., 2005, 390(1-2), 270-274. https://doi.org/10.1016/j.jallcom.2004.08.040
  21. C. Manaranche and H. Hornberger, Dent. Mater., 2007, 23(11), 34-36. https://doi.org/10.1016/j.dental.2005.11.037
  22. C. F. Chen, M. X. Lu, D. B. Sun, Z. H. Zhang and W. Chang, Corros., 2005, 61(6), 594-601. https://doi.org/10.5006/1.3278195
  23. T. Kamimura, and M. Stratmann, Corros. Sci., 2001, 43(3), 429-447. https://doi.org/10.1016/S0010-938X(00)00098-6
  24. M. Mikulewicz, P. Wolowiec, I. Michalak, K. Chojnacka, W. Czopor, A. Berniczei-Royko, A. Vegh and T. Gedrange, Med. Sci. Monit., 2014, 20, 860-865. https://doi.org/10.12659/MSM.890769
  25. K. House, F. Sernetz, D. Dymock, J. R. Sandy and A. J. Ireland, Am. J. Orthod. Dentofac. Orthop., 2008, 133(4), 584-592. https://doi.org/10.1016/j.ajodo.2007.03.021
  26. M. Mikulewicz, P. Wolowiec, B. W. Loster, K. Chojnacka, J. Trace Elem. Med. Biol., 2015, 31, 74-77. https://doi.org/10.1016/j.jtemb.2015.03.007
  27. H. Her, C. Yu, L. Tzu, W. Shih, Y. Hui, S. Kuo, H. Chii, Biomaterials, 2003, 24(20), 3585-3592. https://doi.org/10.1016/S0142-9612(03)00188-1
  28. S. M. Danaei, A. Safavi, S.M.M. Roeinpeikar, M. Oshagh, S. Iranpour, and M. Omidekhoda, Am. J. Orthod. Dentofac. Orthop; 2011, 139(6), 730-734. https://doi.org/10.1016/j.ajodo.2011.03.004
  29. K.H. Lo, C.H. Shek, J.K.L. Lai, Mater. Sci. Eng., R, 2009, 65(4-6), 39-104. https://doi.org/10.1016/j.mser.2009.03.001
  30. M. W. A. Rashid, M. Gakim, Z. M. Rosli, M. A. Azam, Int. J. Electrochem. Sci., 2012, 7, 9465-9477
  31. Y. Gao, C. Zhang, X. Xiong, Z. Zheng, M. Zhu, Eng. Fail. Anal, 2012, 24, 26-32. https://doi.org/10.1016/j.engfailanal.2012.03.004
  32. J. Porcayo, M. Casales, V. M. Salinas, and L. Martinez, Bioinorg. Chem. Appl., DOI:10.1155/2015/930802(2015).
  33. J. Tahmassebi, M. S. Duggal, G. Malik and M. E. J. Curzon, J. Dent., 2006, 34(1), 2-11. https://doi.org/10.1016/j.jdent.2004.11.006
  34. C. Escriva, E. Blasco, D. M. Garcia, J. Garcia and A. Guenbour, Electrochim. Acta, 2012, 80, 248-256. https://doi.org/10.1016/j.electacta.2012.07.012
  35. W. He, O. O. Knudsen and S. Diplas, Corros. Sci., 2009, 51(12), 2811-2819. https://doi.org/10.1016/j.corsci.2009.08.010
  36. D. Rios, H. M. Honorio, A. C. Magalhaes, A. Wiegand, M. A. D. A. M. Machado and M.A.R. Buzalaf, J. Dent., 2009, 37(2), 163-166. https://doi.org/10.1016/j.jdent.2008.11.004
  37. H. Yip, R. Wong, World J. Orthod., 2009, 10(1), 33-40.
  38. M. Shahabi, A. Jahanbin, H. Esmaily, H. Sharifi, S. Salari, J. Clin. Pediatric. Dent., 2011, 35(4), 429-432. https://doi.org/10.17796/jcpd.35.4.m17j2h5827861m55
  39. M. Seruga, D. Hasenay, Z. Lebensm.-Unters. Forsch. A, 1996, 202(4), 308-312.