한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제28권1호
  • /
  • Pages.98-105
  • /
  • 2017
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

Stepwise 방식을 이용한 압축 착화 디젤 엔진의 반응 표면 모델 구축

Construction of Response Surface Model for Compression Ignition Engine Using Stepwise Method

  • WAHONO, BAMBANG (Graduate School of Mechanical Engineering University of Ulsan) ;
  • PUTRASARI, YANUANDRI (Graduate School of Mechanical Engineering University of Ulsan) ;
  • LIM, OCKTAECK (School of Mechanical Engineering, University of Ulsan)
  • 투고 : 2017.02.10
  • 심사 : 2017.02.28
  • 발행 : 2017.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In recent years, compression ignition engine has been equipped with some control devices such as common rail injection system and turbocharger. In order to control the large number of input parameter appropriately in consideration of $NO_x$, HC and engine power as the engine output objectives. The model construction which reproduces the characteristic value of $NO_x$, HC and engine power from input parameter is needed. In this research, the stepwise method was applied to construct the compression ignition engine model. By using the preliminary experimental data of single cylinder compression ignition engine, the prediction model of $NO_x$, HC and engine power on single injection compression ignition engine was built and compared with the main experimental data.

키워드

참고문헌

  1. P.K. Karra, S.C. Kong, "Diesel Engine Emissions Reduction Using Particle Swarm Optimization", Combustion Science and Technology, vol. 182:7,Taylor and Francis, pp. 879-903. 2010. https://doi.org/10.1080/00102200903418260
  2. T. Kitamura, T. Ito, J. Senda and H. Fujimoto, "Mechanism of Smokeless Diesel Combustion with Oxygenated Fuels Based on The Dependence of The Equivalence Ratio and Temperature on Soot Particle Formation", Int. J. Engine. Research, 3, pp.223-248, 2002. https://doi.org/10.1243/146808702762230923
  3. Z. Lu, M. Ogawa and H. Ogai, "Response Surface Modeling of Multiple Injection Diesel Engine", The 54th Conference of the Automatic Control Federation, Toyohashi University of Technology, November 19-20, 2011.
  4. Box, G. E. P., and K. B. Wilson. "On the Experimental Attainment of Optimum Conditions". Journal of the Royal Statistical Society. Series B (Methodological) 13, no. 1 pp. 1-45, 1951.
  5. Asadi, Nooshin; Zilouei, Hami. "Optimization of Organosolv Pretreatment of Rice Straw for Enhanced Biohydrogen Production using Enterobacter Aerogenes". Bioresource Technology. 227: 335-344. doi:10.1016/j.biortech.2016.12.073, March 2017.
  6. J. B. Hurke and A. S. Padalkar, "Performance Optimization of CI Engine Fuelled with Waste Fried Oil Methyl Ester-Diesel Blend Using Reponse Surface Methology", Fuel, pp.266-273, 2014.
  7. C. Poompipatpong and A. Kengpol, "Design of a Decision Support Methodology Using Response Surface for Torque Comparison: An Empirical Study on An Engine Fueled with Waste Plastic Pyrolisi Oil", Energy, pp. 850-856, 2015.
  8. N. Zhou, Z. Huang and F. Tuffner, "A Modified Stepwise Linear Regression Method for Estimating Modal Sensitivity", IEEE Power and Energy Society General Meeting, pp. 1-7, 24-29 July 2011.
  9. N. Amral, C.S.Ozveren and D. King, "Short Term Load Forecasting using Multiple Linear Regression", 42nd International Universities Power Engineering Conference, pp.1192-1198, Brighton, 4-6 Sept. 2007.
  10. Apaslan Atmanli, Bedri Yuksel, Erol Ileri and A. Deniz karaoglan. "Response Surface Methodology Based Optimization of Diesel-n-Butanol-Cotton Oil Ternary Blend Ratios to Improve Engine Performance and Exhaust Emission Characteristics". Energy Conversion and Management, pp. 383-394, 2015.
  11. B. Rajesh Kumar, S. Saravanan, D. Rana and A. Nagendran. "Combined Effect of Injection Timing and Exhaust Gas Recirculation (EGR) on Performance and Emissions of a DI Diesel Engine Fuelled with Next Generation Advanced Biofuel-Diesel Blends using Response Surface Methodology". Energy Conversion and Management, pp.470-486, 2016.