한국염색가공학회지 (Textile Coloration and Finishing)

  • 제29권4호
  • /
  • Pages.223-230
  • /
  • 2017
  • /
  • 1229-0033(pISSN)
  • /
  • 2234-036X(eISSN)
한국염색가공학회 (The Korean Society of Dyers and Finishers)
권호 표지
DOI QR코드

DOI QR Code

초소수성 형광염료에 의한 고강도/고분자량폴리에틸렌섬유의 염색

Dyeing of High Strength and High Molecular Weight Polyethylene Fiber Using Super Hydrophobic Fluorescence Dyes

  • 김태경 (경북대학교 섬유시스템공학과) ;
  • 박지훈 (경북대학교 섬유시스템공학과) ;
  • 이준헌 (경북대학교 섬유시스템공학과) ;
  • 김태건 (경북대학교 섬유시스템공학과)
  • Kim, Taekyeong (Department of Textile System Engineering, Kyungpook National University) ;
  • Park, Jihoon (Department of Textile System Engineering, Kyungpook National University) ;
  • Lee, Junheon (Department of Textile System Engineering, Kyungpook National University) ;
  • Kim, Taegun (Department of Textile System Engineering, Kyungpook National University)
  • 투고 : 2017.11.10
  • 심사 : 2017.12.06
  • 발행 : 2017.12.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Three super hydrophobic fluorescence dyes were selected to dye high molecular weight polyethylene fiber and their molar absorptivity, emission spectrum, and quantum yield were measured. From the results of color strength on the fiber, all the three dyes exhibited linear increase according to the dye concentration and Fluoro3 dye showed the highest color strength among them. Emission strength of the fluorescence dyes on the fiber was investigated according to the dye concentrations. The emission was increased with the increase of the dye concentration at relatively low dye concentration and then after showing the maximum emission strength the emission was decreased at higher dye concentrations. The highest emission was obtained in Fluoro2 dye. Color fastness to washing and rubbing was generally good enough, however, especially to light, only Fluoro3 dye exhibited rating 3 acceptable practically and Fluoro1 and 2 was ratings 1 which is unacceptable level.

키워드

참고문헌

  1. J. U. Choi, M. H. Jee, M. H. Lee, J. S. Lee, and D. H. Baik, Structure and Property Relations in Heat-treated para-Aramid Fibers, Textile Science and Engineering, 47(1), 15(2010).
  2. H. J. Lee, J. S. Won, S. C. Lim, T. S. Lee, J. Y. Yoon, and S. G. Lee, Preparation and Characterization of PAN-based Carbon Fiber with Carbonization Temperature, Textile Science and Engineering, 53(2), 103(2016). https://doi.org/10.12772/TSE.2016.53.103
  3. H. E. Khaljiri, R. E. Farsani, and K. A. Banaie, The Evaluation of the Thermal and Mechanical Properties of Aramid/Semi-Carbon Fibers Hybrid Composites, Fibers and Polymers, 18(2), 296(2017). https://doi.org/10.1007/s12221-017-6442-2
  4. L. Yao, C. Lee, and J. Kim, Fabrication of Electrospun meta-Aramid Nanofibers in Different Solvent Systems, Fibers and Polymers, 11(7), 1032(2010). https://doi.org/10.1007/s12221-010-1032-6
  5. M. An, H. Xu, Y. Lv, Q. Gu, and Z. Wang, Structural Difference of Gel-spun Ultra-high Molecular Weight Polyethylene Fibers Affected by Cold Drawing Process, Fibers and Polymers, 18(3), 549(2017). https://doi.org/10.1007/s12221-017-6399-1
  6. M. Bartusch, R. D. Hund, H. Hund, and C. Cheri, Surface Functionalisation of UHMW Polyethylene Textile with Atmospheric Pressure Plasma, Fibers and Polymers, 15(4), 736(2014). https://doi.org/10.1007/s12221-014-0736-4
  7. T. Kim, S. Jeon, D. Kwak, and Y. Chae, Coloration of Ultra High Molecular Weight Polyethylene Fibers Using Alkyl-substituted Anthraquinoid Blue Dyes, Fibers and Polymers, 13(2), 212(2012). https://doi.org/10.1007/s12221-012-0212-y
  8. D. Kwak and T. Kim, Dyeing of Ultra High Molecular Weight Polyethylene Fibers with Diaminoanthraquinoid Blue Disperse Dyes Having Linear Long Alkyl Substituents, Textile Coloration and Finishing, 24(3), 180 (2012). https://doi.org/10.5764/TCF.2012.24.3.180
  9. N. Jo, J. Lee, and T. Kim, Synthesis of Bluish-green Dyes for Pure Polyolefin Fibers, Textile Coloration and Finishing, 28(3), 156(2016). https://doi.org/10.5764/TCF.2016.28.3.156
  10. T. Kim and M. Ryu, Synthesis of Super Hydrophobic Orange Dyes Having Maximum Absorption at 450-500nm for Pure Polyolefin Fibers, Textile Coloration and Finishing, 26(3), 165(2014). https://doi.org/10.5764/TCF.2014.26.3.165
  11. N. V. Marinova, N. I. Georgiev, and V. B. Bojinov, Design, Synthesis and pH Sensing Properties of Novel 1,8-naphthalimide-based Bichromophoric System, J. of Photrochemistry and Photobiology A, Chemistry, 222, 132(2011). https://doi.org/10.1016/j.jphotochem.2011.05.012
  12. H. Zollinger, "Color Chemistry", Wiley-VCH, Weinheim, pp.34-37, 2003.
  13. J. Yanga, X. Wang, and L. Xu, The Synthesis and Spectral Properties of Novel 4-phenylacetylene-1,8-naphthalimide Derivatives, Dyes and Pigments, 66, 83(2005). https://doi.org/10.1016/j.dyepig.2004.07.015
  14. C. Jianzhong, H. Suh, and S. Kim, Synthesis and Properties of Conjugated Copolymers with 2-pyran-4-ylidene Malononitrile, Dyes and Pigments, 68, 75(2006). https://doi.org/10.1016/j.dyepig.2005.01.002
  15. O. Oter, K. Ertekin, C. Kirilmis, M. Koca, and M. Ahmedzade, Characterization of a Newly Synthesized Fluorescent Benzofuran Derivative and Usage as a Selective Fiber Optic Sensor for Fe(III), Sensors and Actuators B, 122, 450(2007). https://doi.org/10.1016/j.snb.2006.06.010
  16. J. R. Lakowicz, J. Malicka, S. Dauria, and I. Gryczynski, Release of the Self-quenching of Fluorescence Near Silver Metallic Surfaces, Analytical Biochemistry, 320, 13(2003). https://doi.org/10.1016/S0003-2697(03)00351-8