한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제16권6호
  • /
  • Pages.75-80
  • /
  • 2017
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

4C의 MM Optical Fiber를 수용 가능한 Fiber Guide의 구조해석

A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber

  • 정윤수 (조선대학교 일반대학원 기계시스템공학과) ;
  • 고가진 (조선대학교 일반대학원 기계시스템공학과) ;
  • 김재열 (조선대학교 기계시스템.미래자동차공학부) ;
  • 유관종 (조선대학교 ICT 융합학부)
  • Jung, Yoon-soo (Dept. of Mechanical System Engineering, Graduate School of Chosun University) ;
  • Gao, Jia-Chen (Dept. of Mechanical System Engineering, Graduate School of Chosun University) ;
  • Kim, Jae-Yeol (School of Mechanical System & Automotive Engineering, Chosun University) ;
  • You, Gwan-Jong (Dept. of ICT Convergence, Chosun University)
  • 투고 : 2017.11.12
  • 심사 : 2017.11.29
  • 발행 : 2017.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The use of optical fiber makes it possible to transfer a large amount of data, thereby enabling a high-speed image transmission with a high response speed and a large number of frames. The need for an optical fiber HDMI System has grown in importance due to the rapid development of displays with large sizes and high-resolution images. In this paper, we have studied the structural design and FEM analysis of a 4C fiber guide for hybrid interconnection implementation. According to the structural analysis of the fiber guide, we have confirmed the safety of the design and we will make additional design changes to minimize the optical loss and fabricate a fiber guide for photoelectric composite HDMI in the future.

키워드

참고문헌

  1. Takanashi, C., , Lee, K. J., "Standard development by committees and communities: a comparative case study of IEEE1394 and USB," Technology analysis & strategic management, Vol. 25, No. 1, pp. 91-105, 2013. https://doi.org/10.1080/09537325.2012.751013
  2. Kang, S. H., "Development of 10W Optical isolator part for optical fiber laser," 2011.
  3. Sahu, Y. J., Payne, D. and Nilsson, J., "Ytterbium-doped Large-core Fiber Laser with 1 kW of Continuous Output Power," Electron Letters, Vol. 40, No. 8, pp. 470-471, 2004. https://doi.org/10.1049/el:20040298
  4. Kim, J. W., "Study on opical Fiber Cleaving by Using Femtosecond and Picosecond Laser," 2014.
  5. Ahn, D. G., Kim, M. S., "A Study on Heat Transfer Characteristics of Laser Cutting for the CSP 1N Sheet Using High-power CW Nd:YAG Laser," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 1, pp. 51-58, 2006.
  6. Kim, J. Y, You, K. J., Park, R., "Study on the Photoelectric Composite Cable for Hybrid Interconnection Implementation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 138-145, 2017. https://doi.org/10.14775/ksmpe.2017.16.3.138
  7. Lee, S. T., Park, S. G., Choi, H. W., "CFRP Laser Joining Computer Simulation in a Parallel Kinematic Machine", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 77-82, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.077
  8. Cho, J. H., Moon, D. J., Lee, J. C., "A Study om the CAE Analysis of Bed of Multi-Tasking Machine for Automotive Power Train Shafts," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No.1, pp. 9-14, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.009
  9. Kang, B. S., Ahn, D. G., Shin, B. S., Shin, J. K., "A Fundamental Study on Polymer/Metal Additive Method using a UV Laser for Consumer-oriented 3D Helmet Products", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 89-94, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.089
  10. Ye, K. H., Choi, H. W.,, "Laser Head Design and Heat Transfer Analysis for 3D Patterning", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 46-50, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.046
  11. Kim, S. T., Lee, S. J. and Choi, Y. H., "Thermal Characteristics Analysis of a High Speed Spindle System by Using FSI Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 83-88, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.083
  12. Kim, W. H., Jung, B. H., Oh, M. H., Choi, S. W. and Kang, D. M., "Effect analysis in Laser Metal Deposition of SKD61 using AISI M2 Power," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 50-56, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.050
  13. Kim, K. M., and Park, J. C., "Optimal Design of Injection Molding Process using the Mahalanobis Taguchi System," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 1-8. 2017. https://doi.org/10.14775/ksmpe.2016.16.1.001
  14. Yoo, D. S, "Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 122-128. 2015 https://doi.org/10.14775/ksmpe.2015.14.6.122
  15. Jeong, J. U., Kwon, S. J., Chu, B. S., Park, J. Y., "Unified-type Design and Structural Analysis for Mecanum Wheel Performance Improvement," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 117-123, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.117
  16. Kang, D. C., Kim, J. H., "A Study on the Corrosion Characteristics of a Metal Surface by Laser-Induced Breakdown Spectroscopy", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 83-89, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.083
  17. Choi, Y. S., Lee, W. S., Hwang, I. H., Park, H. K., Jo, H. T., Lee, Y. S., Kim, K. J., Song, S. T., Lee, J. C., "A Study on the Structural Analysis of Automotive Crankshaft Multi Grinding Machine," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 20-25, 2012.
  18. Han, M. S., Jo, J.u., "A Study on Durability of Under Bar at car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
  19. Kim, J. Y., Park, D. K, Lee, G. I, Gao, J. C, "Research on the Design of the Ultra-high-precision Positioning Control Error Compensation" IJPEM pp. 1351-1358, 2016.
  20. Kim, J. Y., Lee, H. N., Kwac, L. K., Han, J. H., Cho, Y. T., Jun C. G., "Control Performance Evaluation of Ultra Precision Positioning Apparatus," Proc. ISIM 2000, pp. 252-255, 2000.
  21. Lee, G. L., and Kim, J. Y., Yoon, S. U., Jung, Y. S., "Assessment of soundness by applying of Optimal design hybrid CURVIC gear and IRT technique" Journal of Advanced Engineering and Technology, Vol. 9, No. 4, pp. 309-314, 2016.
  22. Kim, J. Y., and Roh, C. S., Lee, G. I., Jung, Y. S., "Integrity Evaluation By IRT Technique And FEM Analysis Of Spur Gear" Journal of The Korean Society of Tribologists & Lubrication Engineering, Vol. 32, No. 4, pp. 113-118, 2016. https://doi.org/10.9725/kstle.2016.32.4.113

피인용 문헌

  1. 자전거 핸들의 강도 해석에 의한 내구성 연구 vol.18, pp.10, 2019, https://doi.org/10.14775/ksmpe.2019.18.10.001
  2. Structural Safety by Shape of Motorcycle Muffler vol.19, pp.1, 2017, https://doi.org/10.14775/ksmpe.2020.19.01.072
  3. Durability Analysis of Automotive Seat Frame by Shape vol.19, pp.3, 2017, https://doi.org/10.14775/ksmpe.2020.19.03.014
  4. 랜딩기어의 구조적 내구성 해석에 의한 융합 연구 vol.11, pp.6, 2017, https://doi.org/10.15207/jkcs.2020.11.6.191
  5. 중형 자동차의 배기매니폴드 형상에 따른 내구성에 관한 융합 연구 vol.12, pp.1, 2017, https://doi.org/10.15207/jkcs.2021.12.1.199
  6. 경차와 대형차에서의 스테빌라이저들의 구조해석에 관한 융합연구 vol.12, pp.2, 2021, https://doi.org/10.15207/jkcs.2021.12.2.173