DOI QR코드

DOI QR Code

중첩모델을 이용한 조명용 LED 렌즈설계 및 분석

The design and the analysis of a LED illumination lens using the overlapped model

  • You, Ilhyun (Department of Information Communication Technology, Semyung University)
  • 투고 : 2016.07.07
  • 심사 : 2016.08.05
  • 발행 : 2017.01.31

초록

본 연구는 균일한 조명을 얻기 위해 중첩 조명 모델(overlapped illumination model)을 사용하여 자유 형상 렌즈(freeform lens)를 제작하였으며, 제작한 LED 렌즈들의 특성을 비교 분석하였다. 제작한 렌즈는 LED 광원의 위치변화, 두께 및 기울임을 이용해 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 측정하였다. 광도 분포의 Z축 방향변화에 대해서는 중첩 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으나, 렌즈두께 변화에 대해서는 중첩모델이 발산모델에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다. 또한, 발산 조명 모델로 설계된 렌즈가 전반적으로 좋은 성능을 나타냈으나, LED 방출에 대한 성능은 중첩 모델에서 그 편차의 폭이 상대적으로 적게 나타났다.

In this research, the overlapped illumination model was used for designing a freeform LED lens with a uniform illuminance distribution on its illuminating plane, and their performances and tolerances were compared. And, the illuminations on a illumination plane was measures for change with average illuminance and illuminance uniformity. As a result of the tolerance analysis about z-axis direction change, thickness change in lens and tilt change of light emission and characteristic change in LED source, overlapped model and divergent illumination model are similar to the performance about Z-axis direction change of light emission in LED source. but the uniformity illumination value in this overlapped model is more remarkably value than it in divergent illumination model about thickness change in LED lens. Also, even though the lens based on a divergent illumination model showed good performance compare to the lens based on an overlapped illumination model, the latter was less the deviation to variation of LED beam radiation ability.

키워드

참고문헌

  1. N. Zheludev, "The life and times of the LED-100-ear history," Nature Photonics, vol. 1, pp189-192, Feb. 2007. https://doi.org/10.1038/nphoton.2007.34
  2. D. Malacara, Z. Malacara, Handbook of optical design, 2nd ed., Marcel Dekker, Inc., Chapter 3,9,18, 2004.
  3. K. Wang, F. Chen, Z. Liu, X. Luo1,4 and S. Liu1, "Design of compact freeform lens for application specific light-emitting diode packaging," Optical. Experiment. vol. 18, pp. 413- 425, Mar. 2010. https://doi.org/10.1364/OE.18.000413
  4. L. Wang, J. M. Sasian, P. Su, and R. J. Koshel, "Generation of Uniform Illumination Using Faceted Reflectors," Proceeding of International Society for Optics and Photonics, vol. 7423, pp1-11, 2009.
  5. Y. Ding, X. Liu, Z. Zheng, and P. Gu, "Freeform LED Lens for uniform illumination, "Optical Experiment, vol. 16, pp.12958-12966, Nov. 2008. https://doi.org/10.1364/OE.16.012958
  6. Z. Zhenrong, H. Xiang, and L. Xu, "Freeform surface Lens for LED uniform illumination," Applied. Optics, vol. 48, no. 35, pp. 6627-6634, Aug. 2009. https://doi.org/10.1364/AO.48.006627
  7. J. Jiang, S. To, W. B. Lee, and Benny Cheung, "Optical design of a freeform TIR lens for LED streetlight," Optik, 121, pp. 1761-1765, June 2010. https://doi.org/10.1016/j.ijleo.2009.04.009
  8. J. Chen, T. Wang, K. Huang, T. Liu, M. Tsai, and C. Lin,, "Freeform lens design for LED collimating Illumination," Optical Experiment, vol. 20, pp. 10984-10995, Dec. 2012. https://doi.org/10.1364/OE.20.010984
  9. X. Yan, J. Yang, F. BU, and G. Zhang, "A Novel LED Lens for Rotationally Symmetric Uniform Illumination," 2011 International Conference on Electronics and Optoelectronics, vol. 3, pp. 82-85, 2011.
  10. B. D. Stone and G. W. Forbes, "Optimal interpolates for Runge-Kutta ray tracing in inhomogeneous media," Journal of Optical. Society. America, vol. 7, no. 2, pp. 248- 254, Feb. 1990. https://doi.org/10.1364/JOSAA.7.000248
  11. H. Y. Jan, W. M. Bergmans, C. W. Tim. S., Jean-Paul, M. G. Linnartz, and R. Rietman, "An analytical model for the illuminance distribution of a power LED," Optical Experiment vol. 16, pp. 21641-21646, Dec. 2008. https://doi.org/10.1364/OE.16.021641
  12. S. Yang, D.C. Kim "Variation of illumination performance with source size and tolerance characteristics of freeform LED lenses," Korean Journal of Optics and photonics, vol. 24, no.1, pp. 29-38, Jan. 2013. https://doi.org/10.3807/KJOP.2013.24.1.029
  13. M. Alan, "Solid state lighting a world of expanding opportunities at LED 2002," III-Vs Review, vol. 16, no.1, pp. 30-33, Jan. 2003. https://doi.org/10.1016/S0961-1290(03)80123-0
  14. C. C. Sun, T. X. Lee, S. H. Ma, and S. M. Huand, "Precise optical modeling for LED lighting verified by cross correlation in the midfield region," Optical Letters, vol. 31, no. 14, pp. 2193-2195, May 2006. https://doi.org/10.1364/OL.31.002193
  15. S. Zhao, K. Wang, F. Chen, D. Wu, and S. Liu, "Lens design of LED searchlight of high brightness and distant spot," Journal of Optical. Society America, vol. 28, pp. 815-820, Aug. 2011. https://doi.org/10.1364/JOSAA.28.000815
  16. G. Wang, L. Wang, F. Li, and D. Kong, "Design of optical element combining Fresnel lens with microlens array for uniform light-emitting diode lighting," Journal of Optical. Society America, vol. 29, pp. 1877-1884, Dec. 2012. https://doi.org/10.1364/JOSAA.29.001877
  17. K. Wang, S. Liu, F. Chen, Z. Liu, and X. Luo, "Effect of manufacturing defects on optical performance of discontinuous freeform lenses," Optical Experiment, vol. 17, pp. 5457-5465, Aug. 2009. https://doi.org/10.1364/OE.17.005457

피인용 문헌

  1. Analysis on High-Power Seaport LED Luminaire with Uniform Light Distribution Based on Optimized Lens and Heatsink vol.11, pp.9, 2017, https://doi.org/10.3390/app11094035