대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제41권1호
  • /
  • Pages.29-36
  • /
  • 2017
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

이젝터를 이용한 세정기술 개발의 기초연구

Basic Investigation for the Development of Cleaning Technology with Ejector

  • 박상규 (전남대학교 기계설계공학부) ;
  • 양희천 (전남대학교 기계설계공학부)
  • Park, Sang Kyoo (School of Mechanical Design Engineering, Chonnam Nat'l Univ.) ;
  • Yang, Hei Cheon (School of Mechanical Design Engineering, Chonnam Nat'l Univ.)
  • 투고 : 2016.08.16
  • 심사 : 2016.11.14
  • 발행 : 2017.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 환형노즐 이젝터를 이용하여 세정수 공급과 기포생성을 동시에 할 수 있는 세정기술 개발을 위한 기초연구를 목적으로 한다. 환형노즐 이젝터의 피치변화에 따른 구동 및 부유체의 정량적 유동특성과 세정수조에 분출되는 분류의 정성적 가시화 이미지를 분석하였으며, 세정물의 농약 잔류물 성분의 농도를 검증하였다. 피치가 증가하면 구동유량은 증가하는 반면에, 유량비는 감소하였다. 피치가 증가하면 분류는 부력분류나 평형분류 거동을 나타내며, 잔류농약의 농도는 감소 후 증가하였다.

The paper presents a basic investigation for the development of cleaning technology employing an annular nozzle ejector for application to cleaning water supply and air bubble generation. The quantitative flow characteristics of the primary and suction flows, the qualitative visualization behavior of the mixed jet, and the percentage concentration of pesticide residual at different values of the ejector screw pitch were investigated. It was seen that the primary flow rate increased, while the mass ratio decreased with increase in screw pitch. Further, the mixed jet behaved like a buoyancy jet or horizontal bubbly jet, and the residual concentration of pesticide first decreased and then increased with increase in screw pitch.

키워드

참고문헌

  1. Palaniappan, M., Gleick, P. H., Allen, L., Cohen, M. J., Christian-Smith, J. and Smith, C., 2010, Clearing the Waters; A Focus on Water Quality Solutions, UNON Publishing Services Section, Nairobi.
  2. Peng, L., Park, S. K. and Yang, H. C., 2014, "Visualization on Fine Bubble Behavior for Cleaning Application," Proceedings of 2014 KSME Fall Annual Meeting, KSME14F-Th16E034.
  3. Rang, M. J., 2009, "Trend on Development and Application of High Performance Surfactants for Detergents," J. Korean Ind. Eng. Chem., Vol. 20, No. 2, pp. 126-133.
  4. Kim, D. J., Du, H., Jang, D. H. and Yang, H. C., 2013, "Experimental Investigation on Air Bubble Behavior for Development of Cleaning Technology," Proceedings of the KSME 2013 Fall Annual Meeting, pp. 4188-4193.
  5. Reuter, F., Mettin, R., Lippert, A., Holsteyns, F. and Okorn-Schmidt, H., 2013, "Single Bubble Cleaning and Vortex Flow," Solid State Phenomena, Vol. 195, pp. 165-168.
  6. Miyamoto, M., Ueyama, S., Hinomoto, N., Saitoh, T., Maekawa, S. and Hirotsuji, J., 2007, "Degreasing of Solid Surfaces by Microbubble Cleaning," Japanese J. Appl. Phys., Vol. 46, No. 3A, pp. 1236-1243. https://doi.org/10.1143/JJAP.46.1236
  7. Ohl, C. D., Arora, M., Dijkink, R., Janve, V. and Lohse, D., 2006, "Surface Cleaning from Laser-Induced Cavitation Bubbles," Appl. Phys. Lett., Vol. 89, pp. 074102-1-074102-3. https://doi.org/10.1063/1.2337506
  8. Sharma, P. K., Gibcus, M. J., van der Mei, H. C. and Busscher, H. J., 2005, "Influence of Fluid Shear and Microbubbles on Bacterial Detachment from a Surface," Appl. Environ. Microbiol., Vol. 71, No. 7, pp. 3668-3673. https://doi.org/10.1128/AEM.71.7.3668-3673.2005
  9. Song, W. D., Hong, M. H., Lukyanchuk, B. and Chong, T. C., 2004, "Laser-Induced Cavitation Bubbles for Cleaning of Solid Surface," J. Appl. Phys., Vol. 95, No. 6, pp. 2952-2956. https://doi.org/10.1063/1.1650531
  10. Ushida, A., Hasegawa, T., Takahashi, N., Nakajima, T., Murao, S., Narumi, T and Uchiyama, H., 2012, "Effect of Mixed Nanobubble and Microbubble Liquids on the Washing Rate of Cloth in an Alternating Flow," J. Surfact. Deterg., Vol. 15, pp. 695-702. https://doi.org/10.1007/s11743-012-1348-x
  11. Wu, Z., Chen, H., Dong, Y., Mao, H., Sun, J., Chen, S., Craig, V. S. J. and Hu, J., 2008, "Cleaning using Nanobubbles: Defouling by Electrochemical Generation of Bubbles," J. Colloid Interface Sci., Vol. 328, pp. 10-14. https://doi.org/10.1016/j.jcis.2008.08.064
  12. Ikeura, H., Kobayashi, F. and Tamaki, M., 2011, "Removal of Residual Pesticides in Vegetables using Ozone Microbubbles," J. Hazard. Mater., Vol. 186, pp. 956-959. https://doi.org/10.1016/j.jhazmat.2010.11.094
  13. Takahashi, M., Chiba, L. and Li, P., 2007, "Formation of Hydroxyl Radicals by Collapsing Ozone Microbubbles under Strongly Acidic Conditions," J. Phys. Chem. B, Vol. 111, pp. 11443-11446. https://doi.org/10.1021/jp074727m
  14. Takahashi, M., Chiba, L. and Li, P., 2007, "Free-Radical Generation from Collapsing Microbubbles in the Absence of a Dynamic Stimulus," J. Phys. Chem. B, Vol. 111, pp. 1343-1347. https://doi.org/10.1021/jp0669254
  15. Ikeura, H., Kobayashi, F. and Tamaki, M., 2011, "Removal of Residual Pesticide, Fenitrothion, in Vegetables by Using Ozone Microbubbles Generated by Different Methods," J. Food Eng., Vol. 103, pp. 345-349. https://doi.org/10.1016/j.jfoodeng.2010.11.002
  16. Lee, W. J., Lee, C. H., Yoo, J. Y., Kim, K. Y. and Jang, K. I., 2011, "Sterilization Efficiency of Washing Method Using Based on Microbubbles and Electrolyzed Water on Various Vegetables," J. Korean Soc. Food Sci. Nutr., Vol. 40, No. 6, pp. 912-917. https://doi.org/10.3746/jkfn.2011.40.6.912
  17. Kim, Y. J., Jung, J. O. and Jung, Y. J., 2015, "Complex Mal-odor Treatment of Foodwaste with Micro-bubble Generated from Enhanced Wet Scrubber," J. Environ. Sci. Int., Vol. 24, No. 1, pp. 73-79. https://doi.org/10.5322/JESI.2015.24.1.73
  18. Park, S. K. and Yang, H. C., 2013, "Mixed Flow Characteristics of Aeration Process for Recirculation Aquaculture System Using Ejector," Trans. Korean Soc. Mech. Eng. B, Vol. 37, No. 9, pp. 847-854. https://doi.org/10.3795/KSME-B.2013.37.9.847
  19. 2013, Phantom Camera Control Software (Version 2.2.737.0), Vision Research.
  20. Kim, D. J., Park, S. K. and Yang, H. C., 2015, "Mixed Flow and Oxygen Transfer Characteristics of Vertical Orifice Ejector," Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 1, pp. 61-69. https://doi.org/10.3795/KSME-B.2015.39.1.061
  21. Kupiec, T., 2004, "Quality-Control Analytical Methods: High-Performance Liquid Chromatography," Int. J. Pharm. Compd., Vol. 8, No. 3, pp. 223-227.
  22. Du, H., Jang, D. H., Kim, D. J. and Yang, H. C., 2012, "Experimental Study of Oxygen Transfer Characteristics in an Aeration System Using an Annular Nozzle Ejector," Proceedings of the KSME 2012 Fall Annual Meeting, pp. 2926-2931.
  23. Lima Neto, I. E., Zhu, D, Z. and Rajartnam, N., 2008, "Horizontal Injection of Gas-Liquid Mixtures in a Tank," J. Hydraulic Eng., Vol. 134, No. 12, pp. 1722-1731. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:12(1722)