DOI QR코드

DOI QR Code

Determination of bearing type effect on elastomeric bearing selection with SREI-CAD

  • Atmaca, Barbaros (Karadeniz Technical University, Department of Civil Engineering) ;
  • Ates, Sevket (Karadeniz Technical University, Department of Civil Engineering)
  • 투고 : 2016.06.15
  • 심사 : 2016.11.03
  • 발행 : 2017.01.25

초록

The aim of this paper is to develop software for designing of steel reinforced elastomeric isolator (SREI) according to American Association for State Highway and Transportation Officials Load and Resistance Factor Design (AASHTO LRFD) Specifications. SREI is used for almost all bridge types and special structures. SREI-structures interface defines support boundary conditions and may affect the seismic performance of bridges. Seismic performance of the bridge is also affected by geometrical and materials properties of SREI. The selection of SREI is complicated process includes satisfying all the design constraints arising from code provisions and maximizing performance at the lowest possible cost. In this paper, design stage of SREI is described up to AASHTO LRFD 2012. Up to AASHTO LRFD 2012 analysis and design program of SREI performed different geometrical and material properties are created with C# object-oriented language. SREI-CAD, name of the created software, allows an accurate design for economical estimation of a SREI in a short time. To determine types of SREI effects, two different types of bearings, rectangular and circular with similar materials and dimension properties are selected as an application. Designs of these SREIs are completed with SREI-CAD. It is seen that ensuring the stability of circular elastomer bearing at the service limit state is generally complicated than rectangular bearing.

키워드

참고문헌

  1. Akoglu, C. and Celik, O.C. (2008), "Effect of elastomeric bearing modeling parameters on the seismic design of RC highway bridges with precast concrete girders", World Conference on Earthquake Engineering, China, October.
  2. American Association of State Highway and Transportation Officials (1961), AASHTO LRFD bridge design specifications, Washington, DC.
  3. American Association of State Highway and Transportation Officials (2012), AASHTO LRFD bridge design specifications, Washington, DC.
  4. Atmaca, B., Yurdakul, M. and Ates, S. (2014), "Nonlinear dynamic analysis of base isolated cable-stayed bridge under earthquake excitations", Soil Dyn. Earthq. Eng., 66, 314-318. https://doi.org/10.1016/j.soildyn.2014.07.013
  5. Buckle, I.G. and Kelly, J.M. (1986), "Properties of slender elastomeric isolation bearings during shake table studies of a large-scale model bridge deck", Joint Seal. Bear. Syst. Concrete Struct., American Concrete Institute, Detroit, Mich., 1, 247-269.
  6. Chen, Z., Zhao, H. and Lou, M. (2015), "Seismic performance and optimal design of framed underground structures with lead-rubber bearings", Struct. Eng. Mech., 58(2), 259-276. https://doi.org/10.12989/SEM.2016.58.2.259
  7. Danielle, L., Mariacristina, S. and Giorgio, S. (2014), "Optimal design of the seismic protection system for isolated bridges", Earthq. Struct., 6(7), 969-999.
  8. Forcellini, D. and Kelly, J.M. (2014), "Analysis of the large deformation stability of elastomeric bearings", J. Eng. Mech., 140(6), 04014036. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000729
  9. Green, T., Yazdani, N., Spainhour, L. and Cai, C.S. (2007), "Effect of bearing stiffness and skew angle on performance of precast concrete bridge", Transport. Res. Record, 1770, 27-33.
  10. Harper, Z.S. and Consolazio, G.R., (2013), "Calculation method for quantifying axial and roll stiffnesses of rectangular steel-reinforced elastomeric bridge bearing pads", Transport. Res. Record, 2331, 3-13. https://doi.org/10.3141/2331-01
  11. Islam, S., Hussain, R.R., Jumaat, M.Z. and Darain, K.M. (2014), "Implication of rubber-steel bearing nonlinear models on soft storey structures", Comput. Concrete, 13(5), 603-619. https://doi.org/10.12989/cac.2014.13.5.603
  12. Jian, F., Xiaohong, L. and Yanping, Z. (2015), "Optimum design of lead-rubber bearing system with uncertainty parameters", Struct. Eng. Mech., 56(6), 959-982. https://doi.org/10.12989/sem.2015.56.6.959
  13. Kim, D., Oh, J., Do, J. and Park, J. (2014), "Effects of thermal aging on mechanical properties of laminated lead and natural rubber bearing", Earthq. Struct., 6(2), 127-140. https://doi.org/10.12989/eas.2014.6.2.127
  14. Manos, G.C., Mitoulis, S.A. and Sextos, A.G. (2011), "Preliminary design of seismically isolated R/C highway overpasses-features of relevant software and experimental testing of elastomeric bearings", III ECCOMAS Thematic Conference on Computational Methods in Struct. Dynamics and Earthquake Engineering, Corfu, Greece, May.
  15. Melkumyan, M.G. (2013), "New approach in design of seismic isolated buildings applying clusters of rubber bearings in isolation systems", Earthq. Struct., 6(4), 587-606.
  16. Moon, B.Y., Kang, G.J., Kang, B.S. and Kelly, J.M. (2002), "Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation", J. Mater. Proc. Technol., 130(131), 145-150.
  17. Muscarella, J.P. (1995), "An experimental study of elastomeric bridge bearings with design recommendations", Degree of Doctorate of Philosophy, Civil Engineering Department, The University of Texas at Austin, USA, August.
  18. Olmos, B.A. and Roesset J.M. (2010), "Effects of the nonlinear behavior of lead-rubber bearings on the seismic response of bridges", Earthq. Struct., 2(1), 215-230.
  19. Patrick, L.Y., Azlan, A., Ahmad, B.A., Rahman and Abdul, K.M. (2014), "Seismic base isolation of precast wall system using high damping rubber bearing", Earthq. Struct., 6(7), 1141-1169.
  20. Roeder, C.W., Stanton, J.F. and Taylor, A.W. (1987), "Performance of elastomeric bearings", National Cooperative Highway Research Program Report #298, Transportation Research Board, National Research Council, Washington, DC.
  21. Yazdani, N., Eddy, S.M. and Cai, C.S. (2000), "Validation of AASHTO bearing stiffness for standard precast concrete bridge girders", ACI Struct. J., 97(3), 436-443.

피인용 문헌

  1. Bearing Repair and Monitoring for Poyanghu Cable-Stayed Bridge vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8819360