한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제26권1호
  • /
  • Pages.44-49
  • /
  • 2017
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

레이저빔을 이용한 티타늄 표면에서의 선택적 구리 전해도금

Selective Electrodeposition on Titanium Surface Using Laser Beam

  • Shin, Hong Shik (Department of Energy System Engineering, Korea National University of Transportation)
  • 투고 : 2016.12.01
  • 심사 : 2017.01.16
  • 발행 : 2017.02.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Titanium has been used in various fields due to its good corrosion and erosion resistance, and superior mechanical properties. The process for selective electro-deposition on a titanium surface using laser beam is proposed in this paper. The process consists of laser irradiation, electro-deposition, and ultrasonic cleaning. Laser irradiation can change the surface morphology of titanium. Through laser irradiation, the surface cleaning effect and a rough surface can be achieved. The surface roughness of titanium was measured according to the laser beam conditions. The characteristics of selective electro-deposition on titanium surface according to surface roughness are investigated by various analytical methods such as SEM, and EDS.

키워드

참고문헌

  1. Madou, M. J., 2002, Fundamental of Microfabrication, CRC press LLC, Boca Raton.
  2. Paunovic, M., Schlesinger, M., 2006, Fundamentals of Electrochemical Deposition, John Wiley & Sons, NJ.
  3. Schlesinger, M., Paunovic, M., 2010, Modern Electroplating, Wiley, NJ.
  4. Romankiw, L. T., 1997, A path: from Electroplating through Lithographic Masks in Electronics to LIGA in MEMS, Microsyst. Technol. 42:20-22 2985-3005.
  5. Wee, L. M., Li, L., 2005, Multiple-layer Laser Direct Writing Metal Deposition in Electrolyte Solution, Appl. Surf. Sci., 247:1-4 285-293. https://doi.org/10.1016/j.apsusc.2005.01.142
  6. Ashfold, M. N., Claeyssens, F., Fuge G. M., Henley S. J., 2004, Pulsed Laser Ablation and Deposition of Thin Film, Chem. Soc. Rev., 33:1 23-31. https://doi.org/10.1039/b207644f
  7. Cho, C. H., Shin, H. S., Chu, C. N., 2013, Selective Electrodeposition of Copper on Stainless Steel using Laser Irradiation, Surf. Coat. Technol., 222:5 15-24. https://doi.org/10.1016/j.surfcoat.2013.01.046
  8. Shin, H. S., Choi, S. Y., 2015, Selective Electrodeposition using Laser Masking and DC Voltage, Journal of KSMTE., 24:1 75-80. https://doi.org/10.7735/ksmte.2015.24.1.075
  9. Lee, S. W., Shin, H. S., Chu, C. N., 2013, Fabrication of Micro-pin Array with High Aspect Ratio on Stainless Steel using Nanosecond Laser Beam Machining, Appl. Surf. Sci., 264:1 653-663. https://doi.org/10.1016/j.apsusc.2012.10.087
  10. Kwon, M. H., Shin, H. S., Chu, C. N., 2014, Fabrication of a Super-hydrophobic Surface on Metal using Laser Ablation and Electrodeposition, Appl. Surf. Sci., 288:1 222-228. https://doi.org/10.1016/j.apsusc.2013.10.011
  11. Turner, M. W., Crouse, P. L., Li, L., 2006, Comparison of Mechanisms and Effects of Nd:YAG and CO2 Laser Cleaning of Titanium Alloys. Appl. Surf. Sci., 252:13 4792-4797. https://doi.org/10.1016/j.apsusc.2005.06.050
  12. Siano, S., Agresti, J., Cacciari, I., Ciofini, D. L., Mascalchi, M, Osticiloli, I, Mencaglia, A. A., 2012, Laser Cleaning in Conservation of Stone, Metal, and Painted Artifacts: State of the Art and New Insights on the use of the Nd:YAG lasers, Appl. Phys. A., 106:2 419-446.
  13. Sartinska, L. L., Barchikovski, S., Wagenda, N., Rud, B. M., Timofeeva, I. I., 2007, Laser Induced Modification Surface Structures, Appl. Surf. Sci., 253:9 4295-4299. https://doi.org/10.1016/j.apsusc.2006.09.032
  14. Lim, J. D., Susna, Y. S. Y., Daniel, R. M., Leong, K. C., Wong, C. C., 2013, Surface Roughness Effect on Copper-alumina Adhesion, Microelectron. Reliab., 53:9-11 1548-1552. https://doi.org/10.1016/j.microrel.2013.07.016
  15. Sun, R. R., Tryk, D. A., Hashimoto, K., Fujishima, A., 2007, Adhesion of Electroless Deposited Cu on ZnO-coated Glass Substrates: The Effect of the ZnO surface Morphology, J. Electrochem. Soc., 146:6 2117-2122. https://doi.org/10.1149/1.1391901
  16. Lv, M., Liu, J., Zeng, X., Du, Q., Ai, J., 2015, High-adhesion Cu Patterns Fabricated by Nanosecond Laser Modification and Electroless Copper Plating, Appl. Surf. Sci., 353: 1150-1155. https://doi.org/10.1016/j.apsusc.2015.07.046