References
- H.W. Park and Y.M. Jo, "Regulation standard of fine particles and control techniques of emission sources", J. Kor. Soc. Atmos. Env. 29 (2013) 486. https://doi.org/10.5572/KOSAE.2013.29.4.486
- M. Nifuku, T. Matsuda and H. Enomoto, "Resent development of standardization of testing methods for dust explosion in Japan", J. Loss Prevent. Proc. 12 (2000) 243.
- N. Mohurle and N.R. Thakare, "Analysis on fabric filtration material for pulse jet fabric filter", Int. J. Emg. Tech. Adv. Eng. 3 (2013) 603.
-
M. Takeda and J.I. Sakimoto, "Thermal stability of the low-oxygen-content silicon carbide fiber,
$Hi-Nicalon^{TM}$ ", Comp. Sci. Tech. 59 (1999) 813. https://doi.org/10.1016/S0266-3538(99)00012-3 - S. Yajima, Y. Hasegawa, K. Okamura and T. Matsuzawa, "Development of high tensile strength silicon fiber using an organosilicon polymer precursor", Nature 273 (1978) 525. https://doi.org/10.1038/273525a0
- H.Q. Ly, R. Taylor and R.J. Day, "Conversion of polycarbosilane (PCS) to SiC-based ceramic Part 1. Characterisation of PCS and curing products", J. Mat. Sci. 36 (2001) 4037. https://doi.org/10.1023/A:1017942826657
- M. Takeda, A. Urano, J.I. Sakamoto and Y. Imai, "Microstructure and oxidative degradation behavior of silicon carbide fiber Hi-Nicalon type S", J. Nucl. Mat. 258-263 (1998) 1594. https://doi.org/10.1016/S0022-3115(98)00223-2
- S. Yajima, Y. Hasegawa, J. Hayashi and M. limura, "Synthesis of continuous silicon carbide fiber with high tensile strength and high Young's modulus", J. Mat. Sci. 13 (1978) 2569.
- M. Takeda and Y. Imai, "Thermomechanical analysis of the low oxygen silicon carbide fibers derived from polycarbosilane", Cer. Eng. Sci. Proc. 14 (1993) 540.
-
P.F. Becher, "Strength degradation in SiC and
$Si_3N_4$ ceramics by exposure to coal slags at high temperatures", J. Mat. Sci. 19 (1984) 2805. https://doi.org/10.1007/BF01026956 - J.E. Marra, E.R. Kreidler, N.S. Jacobson and D.S. Fox, "Reactions of silicon-based ceramics in mixed oxidation chlorination environments", J. Am. Ceram. Soc. 71 (1988) 1067. https://doi.org/10.1111/j.1151-2916.1988.tb05793.x
-
C. Onneby and C.G. Pantano, "Silicon oxycarbide formation of SiC surfaces and at the
$SiC/SiO_2$ interface", J. Vac. Sci. Technol. A 15 (1997) 1597. https://doi.org/10.1116/1.580951 - A. Guo, M. Rose, M. Modesti, J. Liu and P. Colombo, "Hierarchically structured polymer-derived ceramic fibers by electrospinning and catalyst-assisted pyrolysis", J. Eur. Ceram. Soc. 34 (2014) 549. https://doi.org/10.1016/j.jeurceramsoc.2013.08.025
- R.G. Munro and S.J. Dapkunas, "Corrosion characteristrics of silicon carbide and silicon nitride", J. Res. Natl. Inst. Stand. Technol. 98 (1993) 607. https://doi.org/10.6028/jres.098.040