DOI QR코드

DOI QR Code

3-Axial Isotropic Electric-Field Probe Design with Resistor-Loaded Short Dipole

저항 부하된 소형 다이폴을 이용한 3축 등방성 전기장 프로브 설계

  • Received : 2016.12.20
  • Accepted : 2017.03.16
  • Published : 2017.03.31

Abstract

In this paper, we designed the 3-axis isotropic electric-field measurement probe using resistor-loaded short dipole with lumped chip resistors. The designed probe shows good isotropic characteristics as well as wideband and low sensitivity. The isotropic characteristics of ${\pm}0.39dB$ from 100 kHz to the 3 GHz band were derived and the reception sensitivity was 0.1 V/m. The frequency response is within 3 dB of the whole section, especially ${\pm}1.3dB$ from 150 kHz to 3 GHz, which is superior to the conventional electric field probe with short dipoles.

References

  1. 김혁제, 박동철, 이애경, 심환우, "소형 이극안테나를 이용한 전계강도 프로브의 설계 및 제작", 한국전자파학회논문지, 6(1), pp. 3-9, 1995년 3월.
  2. 김윤명, 이승배, 김기회, "전자파비흡수율(SAR) 측정용 전기장 프로브의 검파 전압 특성", 한국전자파학회논문지, 16(2), pp. 217-221, 2005년 2월.
  3. K. Kalyanasundaram, K. Arunachalam, "A low cost broadband probe for electric field measurement", Proceeding of NDE2011, Dec. 2011.
  4. M. Kanda, "Standard probes for electromagnetic field measurement", IEEE Trans. Antennas Propagate, vol. 41, pp. 1349-1364, 1993. https://doi.org/10.1109/8.247775
  5. Motohisa Kanda, "A relatively short cylindrical broadband antenna with tapered resistive loading for picosecond pulse measurements", IEEE Trans. Antennas Propagate., vol. 26, pp. 439-447, 1978. https://doi.org/10.1109/TAP.1978.1141853
  6. IEEE Std 1309-1996, "IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz".