DOI QR코드

DOI QR Code

Synthesis and Characterization of Waterborne Polyurethane for Water Resistance

내수성 향상을 위한 수성 폴리우레탄의 합성 및 특성

  • Choi, Min Ji (Korea Institute of Footwear and Leather Technology (KIFLT)) ;
  • Jeong, Boo Young (Korea Institute of Footwear and Leather Technology (KIFLT)) ;
  • Cheon, Jung Mi (Korea Institute of Footwear and Leather Technology (KIFLT)) ;
  • Park, Kuenbyeol (Korea Institute of Footwear and Leather Technology (KIFLT)) ;
  • Chun, Jae Hwan (Korea Institute of Footwear and Leather Technology (KIFLT))
  • 최민지 (한국신발피혁연구원 고분자표면연구실) ;
  • 정부영 (한국신발피혁연구원 고분자표면연구실) ;
  • 천정미 (한국신발피혁연구원 고분자표면연구실) ;
  • 박큰별 (한국신발피혁연구원 고분자표면연구실) ;
  • 천제환 (한국신발피혁연구원 고분자표면연구실)
  • Received : 2017.02.14
  • Accepted : 2017.03.03
  • Published : 2017.03.30

Abstract

In this study, waterborne polyurethane was synthesized with polyester polyol, poly(propylene carbonate) (PPC), 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$) and dimethylol propionic acid (DMPA) to improve the water resistance. The properties of the synthesized waterborne polyurethane using poly(propylene carbonate) (WPUP) was evaluated through FT-IR, GPC, DSC and UTM. The mechanical properties were increased with the increase in the amount of PPC. When the ratio of polyester polyol to poly(propylene carbonate) is 9:1, the highest water resistance was showed.

본 연구에서는 polyester polyol을 사용한 수성 폴리우레탄의 내수성을 향상시키기 위해 polyester polyol, poly(propylene carbonate) (PPC), 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA)를 사용하여 수성 폴리우레탄을 합성하였다. PPC를 사용하여 합성된 수성 폴리우레탄의 물성은 FT-IR, GPC, DSC 및 UTM 등을 통해 평가하였다. PPC의 함량이 증가함에 따라 합성된 수성 폴리우레탄의 기계적 물성은 증가하였으며 polyester polyol과 PPC의 비가 9 : 1일 때 가장 높은 값의 내수성을 나타내었다.

Keywords

References

  1. K. H. Jin and U. R. Cho, Elastomers and Composites, 49, 31 (2014). https://doi.org/10.7473/EC.2014.49.1.31
  2. H. J. Kim, Rubber Technology, 4, 77 (2003).
  3. Mark F. Sonnenschein, "Polyurethanes (Science, Technology, Markets, and Trends)", 1, 10, JohnWile&Sonslnc (2014).
  4. S. M. Kim, N. S. Kwak, Y. K. Yang, B. K. Yim, B. Y. Park, and T. S. Hwang, Polymer (Korea), 29, 253 (2005).
  5. C. Y. Park, Elastomers and Composites, 49, 245 (2014). https://doi.org/10.7473/EC.2014.49.3.245
  6. K. J. Ryu and C. Y. Park, Journal of Environmental Science International, 23, 1909 (2011).
  7. Y. S. Chun, Y. K. Hong, and K. H. Chung, J. of Korean Ind. Eng. Chemistry, 7, 194 (1996).
  8. J. S. Youm and H. J. Kang, Polymer (Korea), 36, 119 (2011).
  9. Y. M. Lee, J. C. Lee, and B. K. Kim, Polymer (Korea), 35, 1005 (1994).
  10. S. Choi, S. T. Noh, and B. B. Choi, J. Ind. Eng. Chem., 5, 52 (1999).
  11. K. C. Frisch and D. Kempner, Eds, Advances in Urethane Science and Technology, 10, 121 (1987).
  12. R. Buscalla, T. Coner, and J. F. Stageman, Polymer Colloids, Elsevier, New York.
  13. Y. W. Chang, J. B. Kim, K. H. Chung, Y. S. Chun, and J. S. Jung, Elastomer, 33, 267 (1998).
  14. S. H. Shin, Synthesis and properties of Polyurethane Dispersion containing Monomeric Diol (2010).
  15. S. H. Lee, Anish Cyriac, J. Y. Jeon, and B. Y. Lee, CLEAN TECHNOLOGY, 17, 244 (2011).
  16. D. I. Lim, H. S. Park, J. H. Park, Jonathan. C. Knowles, and M. S. Gong, Journal of Bioactive and Compatible Polymers, 28, 274 (2013). https://doi.org/10.1177/0883911513484572
  17. J. B. Ahn, H. K. Cho, C. N. Jeong, and S. T. Nho, J. of Korean Ind. Eng. Chem., 8, 230 (1989).
  18. A. W. McLennaghan and R. A. Petherick, Eur. Polym. J., 24, 1063 (1988). https://doi.org/10.1016/0014-3057(88)90066-3
  19. J. C. Lee and B. K. Kim, Polymer, 19, 223 (1995).
  20. H. X. Xiao, K. C. Frisch, and N. MAlwitz, J. Appl. Polym. Sci., 54, 1643 (1994). https://doi.org/10.1002/app.1994.070541107
  21. A. Eceiza, M. D. Martin, K. de la Caba, G. Kortaberria, N. Gabilondo, M. A. Corcuera, and I. Mondragon, Polym. Eng. Sci., 48, 297 (2008). https://doi.org/10.1002/pen.20905

Cited by

  1. 삼관능 모노머의 종류 및 함량에 따른 자외선 경화형 감압 점착 필름의 특성 vol.20, pp.1, 2017, https://doi.org/10.17702/jai.2019.20.1.15
  2. 소수성 UV 경화형 우레탄 아크릴레이트와 아크릴 점착제 사이의 계면 부착력 향상을 위한 에폭시 실란의 영향 vol.31, pp.2, 2020, https://doi.org/10.14478/ace.2020.1005