DOI QR코드

DOI QR Code

자유곡면 CFRP 판형 가공물 신속고정용 유연지그 및 엔드 이펙터

End Effectors and Flexible Fixtures for Rapidly Holding Freeform-Surface CFRP Workpieces

  • Son, Younghoon (School of Mechanical Engineering, Chung-Ang University) ;
  • Do, Minh Duc (School of Mechanical Engineering, Chung-Ang University) ;
  • Choi, Hae-Jin (School of Mechanical Engineering, Chung-Ang University)
  • 투고 : 2017.03.08
  • 심사 : 2017.03.23
  • 발행 : 2017.04.01

초록

In this study, flexible fixtures and end effectors are conceptually designed for the holding of thin-walled carbon-fiber reinforced-plastic (CFRP) workpieces in machining processes. Firstly, the fixture scenarios and system requirements for the conceptual designs of flexible-fixture and core units are proposed, including the propounding of the workpiece-holding mechanism and the core-unit requirements. A ball-joint pneumatic system is determined as a locking mechanism of the flexible-fixture system for the machining of thin-walled components. Secondly, conceptual designs of the core units are suggested with the driven requirements from the fixture scenarios. A self-tilting mechanism and an end-effector return mechanism are also proposed. Finally, the prototypes of the core units are manufactured, and the workpiece-holding capacity of each prototype is measured.

키워드

참고문헌

  1. Konig, W. and Grass, P., "Quality Definition and Assessment in Drilling of Fibre Reinforced Thermosets," CIRP Annals-Manufacturing Technology, Vol. 38, No. 1, pp. 119-124, 1989. https://doi.org/10.1016/S0007-8506(07)62665-1
  2. Sihn, S., Kim, R. Y., Kawabe, K., and Tsai, S. W., “Experimental Studies of Thin-Ply Laminated Composites,” Composites Science and Technology, Vol. 67, No. 6, pp. 996-1008, 2007. https://doi.org/10.1016/j.compscitech.2006.06.008
  3. Douglas, W. A. and Ozer, T., "Universal Holding Fixture," US Patents, 4684113A, 1987.
  4. Martinez, M. T., "Machine Tool Installation for Supporting and Machining Workpieces," US Patents, 5163793A, 1991.
  5. Bumgarner, K., Lebakken, C., Vando, C., Reddie, W., and Jacovetti, G., "Universal Holding Fixture," US Patents, 8079578 B2, 2011.
  6. Infinite Tool Systems, "A Tale of Two Flexible Tooling Systems," http://infinitetool.com/turnkey-automated-systems-portfolio/flexibletooling-system/ (Accessed 22 MAR 2017)
  7. MTorres, "Multiflexible Universal Holding Fixture," http://www.mtorres.es/en/aeronautics/products/carbon-fiber/torrestool/ (Accessed 28 MAR 2017)
  8. MODIG Machine Tool Sweden, "Modig Universal Holding Fixture Skin," http://www.mtorres.es/en/aeronautics/products/carbon-fiber/torrestool/ (Accessed 28 MAR 2017)
  9. CMS North America Inc., "CMS Advanced Materials," http://www.cmsna.com/cms-advanced-materials-c-54_201_202_208.html/ (Accessed 28 MAR 2017)
  10. Hu, F. and Li, D., "Process Planning and Simulation Strategies for Perimeter Milling of Thin-Walled Flexible Parts Held by Reconfigurable Fixturing System," Proc. of 3rd International Conference in Measuring Technology and Mechatronics Automation, pp. 922-926, 2011.
  11. Choi, H. J., "End Effector of Fixture for Walled Workpieces," Chung-Ang University Industry-Academy Cooperation Foundation, 2017.

피인용 문헌

  1. Effect of Dome Curvature on Failure Mode of Type4 Composite Pressure Vessel vol.19, pp.3, 2018, https://doi.org/10.1007/s12541-018-0048-5