DOI QR코드

DOI QR Code

능동형 위상보정을 이용한 정밀 속도리플 제어기의 개발

The Development of Velocity Ripple Controller Using Active Phase Compensation

  • 강석일 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 정재현 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 김정한 (서울과학기술대학교 기계시스템디자인공학과)
  • Kang, Seok Il (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Jeong, Jae Hyeon (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Kim, Jung Han (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology)
  • 투고 : 2016.07.14
  • 심사 : 2017.01.11
  • 발행 : 2017.04.01

초록

Velocity ripple in manufacturing processes reduces productivity and limits the precision of the product. In practice, the frequency and phase of velocity ripples always change minutely, which makes it impossible to compensate for the ripple by simply inserting an opposite feed-forward signal in the system. In this study, an active-phase compensation algorithm was developed to enable the velocity-ripple controller to track the phase change of the ripples in real time. The proposed controller can compensate for the velocity ripple whatever its cause, including disturbance by the torque ripple. The algorithm consists of three functional modules: the velocity-ripple extractor, the synchronized integrator, and the phase shifter. Experimental results showed that the proposed controller clearly reduces velocity ripples with phase variation.

키워드

참고문헌

  1. Kim, D. H., Choi, J. H., Son, C. W., and Baek, Y. S., “Theoretical Analysis and Experiments of Axial Flux PM Motors with Minimized Cogging Torque,” Journal of Mechanical Science and Technology, Vol. 23, No. 2, pp. 335-343, 2009. https://doi.org/10.1007/s12206-008-0814-x
  2. Kwack, J. H. and Min, S. J., "Structural Optimization of Interor Permanent Magnet Motor for Torque Ripple Reduction Considering Speed Range," Proc. of the Korean Society of Automotive Engineers Annual Conference, pp. 3045-3049, 2009.
  3. Bianchi, N., Bolognani, S., and Cappello, A., “Reduction of Cogging Force in PM Linear Motors by Pole-Shifting,” IEE Proceedings-Electric Power Applications, Vol. 152, No. 3, pp. 703-709, 2005. https://doi.org/10.1049/ip-epa:20045082
  4. Lee, D. H., “A Torque Ripple Reduction of Miniature BLDC Using Instantaneous Voltage Control,” Journal of The Korean Society of Mechanical Engineers, Vol. 31, No. 1, pp. 18-25, 2007. https://doi.org/10.3795/KSME-A.2007.31.1.018
  5. Song, J. H., Jang, J. S., and Kim, B. T., "Reduction of Torque Ripple in a BLDC Motor Using an Improved Voltage Control," Journal of Institute of Control, Robotics and Systems, Vol. 16, No. 2, pp. 145-150, 2010. https://doi.org/10.5302/J.ICROS.2010.16.2.145
  6. Lee, G. H., Choi, W. C., Kim, S. I., Kwon, S. O., and Hong, J. P., “Torque Ripple Minimization Control of Permanent Magnet Synchronous Motors for EPS Applications,” International Journal of Automotive Technology, Vol. 12, No. 2, pp. 291-297, 2011. https://doi.org/10.1007/s12239-011-0034-8
  7. Won, T. H., Park, H. W., and Lee, M. H., “Torque Ripple Minimization of BLDC Motor including Flux-Weakening Region,” Journal of Institute of Control Robotics and Systems, Vol. 8, No. 6, pp. 445-454, 2002. https://doi.org/10.5302/J.ICROS.2002.8.6.445
  8. Kim, H. B., Lee, B. H., Han, S. O., and Huh, K. S., “Nonlinear Adaptive Control for Linear Motor through the Estimation of Friction Forces and Force Ripples,” The Korean Society of Mechanical Engineers, Vol. 31, No. 1, pp. 18-25, 2007. https://doi.org/10.3795/KSME-A.2007.31.1.018
  9. Choi, Y. M., Gweon, D. G., and Lee, M. G., “Adaptive Force Ripple Compensation and Precision Tracking Control of High Precision Linear Motor System,” J. Korean Soc. Precis. Eng., Vol. 22, No. 12, pp. 51-60, 2005.
  10. Butler, H., “Magnetic Disturbance Compensation for a Reticle Stage in a Lithographic Tool,” Mechatronics, Vol. 23, No. 6, pp. 559-565, 2013. https://doi.org/10.1016/j.mechatronics.2013.04.011
  11. Kim, H. M., Choo, Y. B., and Lee, D. H., “Design of the Modified PID Speed Controller to Reduce the Speed Ripple,” Journal of the Transactions of Korean Institute of Power Electronics, Vol. 17, No. 2, pp. 135-145, 2012. https://doi.org/10.6113/TKPE.2012.17.2.135
  12. Jang, H. Y., Park, K. C., and Jang, P. H., "Compensation of Torque Ripple of Brushless DC Motor Usign Feedforward Method," Journal of Institute of Control Robotics and Systems, No. 10, pp. 736-739, 1997.
  13. Zhao, S. and Tan, K. K., "Adaptive Feedforward Compensation of Force Ripples in Linear Motors," Control Engineering Practice, Vol. 13, No. 9, pp. 1081-1092, 2005. https://doi.org/10.1016/j.conengprac.2004.11.004