DOI QR코드

DOI QR Code

Prediction models of compressive strength and UPV of recycled material cement mortar

  • Wang, Chien-Chih (Department of Civil Engineering and Geomatics, Cheng Shiu University) ;
  • Wang, Her-Yung (Department of Civil Engineering, National Kaohsiung University of Applied Sciences) ;
  • Chang, Shu-Chuan (Department of Civil Engineering, National Kaohsiung University of Applied Sciences)
  • 투고 : 2015.12.16
  • 심사 : 2017.01.13
  • 발행 : 2017.04.25

초록

With the rising global environmental awareness on energy saving and carbon reduction, as well as the environmental transition and natural disasters resulted from the greenhouse effect, waste resources should be efficiently used to save environmental space and achieve environmental protection principle of "sustainable development and recycling". This study used recycled cement mortar and adopted the volumetric method for experimental design, which replaced cement (0%, 10%, 20%, 30%) with recycled materials (fly ash, slag, glass powder) to test compressive strength and ultrasonic pulse velocity (UPV). The hyperbolic function for nonlinear multivariate regression analysis was used to build prediction models, in order to study the effect of different recycled material addition levels (the function of $R_m$(F, S, G) was used and be a representative of the content of recycled materials, such as fly ash, slag and glass) on the compressive strength and UPV of cement mortar. The calculated results are in accordance with laboratory-measured data, which are the mortar compressive strength and UPV of various mix proportions. From the comparison between the prediction analysis values and test results, the coefficient of determination $R^2$ and MAPE (mean absolute percentage error) value of compressive strength are 0.970-0.988 and 5.57-8.84%, respectively. Furthermore, the $R^2$ and MAPE values for UPV are 0.960-0.987 and 1.52-1.74%, respectively. All of the $R^2$ and MAPE values are closely to 1.0 and less than 10%, respectively. Thus, the prediction models established in this study have excellent predictive ability of compressive strength and UPV for recycled materials applied in cement mortar.

키워드

참고문헌

  1. Bilir, T., Gencel, O. and Topcu, I.B. (2015), "Properties of mortars containing fly ash as fine aggregate", Constr. Build. Mater., 93(9), 782-786. https://doi.org/10.1016/j.conbuildmat.2015.05.095
  2. Chen, S.H., Chang, C.S., Wang, H.Y. and Huang, W.L. (2011), "Mixture design of high performance recycled liquid crystal glasses concrete (HPGC)", Constr. Build. Mater., 25(10), 3886-3892. https://doi.org/10.1016/j.conbuildmat.2011.04.012
  3. Chen, W. and Brouwers, H.J.H. (2007a), "The hydration of slag, part 1: Reaction models for alkali-activated slag", J. Mater. Sci., 42(2), 428-443. https://doi.org/10.1007/s10853-006-0873-2
  4. Chen, W. and Brouwers, H.J.H. (2007b), "The hydration of slag, part 2: Reaction models for blended cement", J. Mater. Sci., 42(2), 444-464. https://doi.org/10.1007/s10853-006-0874-1
  5. Cojbasic, L., Stefanovic, G., Sekulic, Z. and Heckmann, S. (2005), "Influence of the fly ash chemical composition on the Portland cement and fly ash mixture hydration mechanism", FACTA Universit., 3(1), 117-125.
  6. Du, H. and Tan, K.H. (2013), "Use of waste glass as sand in mortar: Part II-alkali-silica reaction and mitigation methods", Cement Concrete Compos., 35(1), 118-126. https://doi.org/10.1016/j.cemconcomp.2012.08.029
  7. Gesoglu, M., Guneyisi, E. and Oz, H.O. (2012), "Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag", Mater. Struct., 45(10), 1535-1546. https://doi.org/10.1617/s11527-012-9855-9
  8. Gesoglu, M., Guneyisi, E., Mahmood, S.F., Oz, H.O. and Mermerdas, K. (2012), "Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete", J. Hazard. Mater., 235, 352-358.
  9. Hwang, C.L. (2007), Pozzolan Concrete Manual, Sinotech Engineering Consultants Inc., Taipei, Taiwan.
  10. Kolani, B., Buffo-Lacarriere, L., Sellier, A., Escadeillas, G., Boutillon, L. and Linger, L. (2012), "Hydration of slag-blended cements", Cement Concrete Compos., 34(9), 1009-1018. https://doi.org/10.1016/j.cemconcomp.2012.05.007
  11. Lewis, C.D. (1982), Industrial and Business Forecasting Methods, Butterworth Scientific Publishers, London, U.K.
  12. Li, G.Y. and Zhao, X.H. (2003), "Properties of concrete incorporating fly ash and ground granulated blast-furnace slag", Cement Concrete Compos., 25(3), 293-299. https://doi.org/10.1016/S0958-9465(02)00058-6
  13. Mishra, A.K. and Ravindra, V. (2015), "On the utilization of fly ash and cement mixtures as a landfill liner material", J. Geosynt. Ground Eng., 1(17), 1-7.
  14. Papadakis, V.G. (2000), "Effect of fly ash on Portland cement systems part II: High-calcium fly ash", Cement Concrete Res., 30(10), 1647-1654. https://doi.org/10.1016/S0008-8846(00)00388-4
  15. Public Construction Commission Executive Yuan (1999), Public Works Fly Ash Concrete Manual, Taiwan.
  16. Public Construction Commission Executive Yuan (2001), Public Works Blast Furnace Fly Ash Concrete Stone Manual, Taiwan.
  17. Sakai, E., Miyahara, S., Ohsawa, S., Lee, S.H. and Daimon, M. (2005), "Hydration of fly ash cement", Cement Concrete Res., 35(6), 1135-1140. https://doi.org/10.1016/j.cemconres.2004.09.008
  18. Schwarz, N. and Neithalath, N. (2008), "Influence of a fine glass powder on cement hydration: Comparison to fly ash and modeling the degree of hydration", Cement Concrete Res., 38(4), 429-436. https://doi.org/10.1016/j.cemconres.2007.12.001
  19. Schwarz, N., Cam, H. and Neithalath, N. (2008), "Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash", Cement Concrete Compos., 30(6), 486-496. https://doi.org/10.1016/j.cemconcomp.2008.02.001
  20. Shayan, A. and Xu, A. (2004), "Value-added utilization of waste glass in concrete", Cement Concrete Res., 34(1), 81-89. https://doi.org/10.1016/S0008-8846(03)00251-5
  21. Shi, C.J., Wu, Y.Z., Riefler, C. and Wang, H. (2005), "Characteristics and pozzolanic reactivity of glass powders", Cement Concrete Res., 35(5), 987-993. https://doi.org/10.1016/j.cemconres.2004.05.015
  22. Tan, K.H. and Du, H. (2013), "Use of waste glass as sand in mortar: Part I-fresh, mechanical and durability properties", Cement Concrete Compos., 35(1), 109-117. https://doi.org/10.1016/j.cemconcomp.2012.08.028
  23. Wang, C.C., Chen, T.T., Wang, H.Y. and Huang, C. (2014a), "A predictive model for compressive strength of waste LCD glass concrete by nonlinear-multivariate regression", Comput. Concrete, 13(4), 531-545. https://doi.org/10.12989/cac.2014.13.4.531
  24. Wang, C.C., Wang, H.Y. and Huang, C. (2014b), "Predictive models of hardened mechanical properties of waste LCD glass concrete", Comput. Concrete, 14(5), 577-597. https://doi.org/10.12989/cac.2014.14.5.577
  25. Wang, C.C., Wang, H.Y., Chen, C.H. and Huang, C. (2015a), "Prediction of compressive strength using ultrasonic pulse velocity for CLSM with waste LCD glass concrete", J. Civil Eng. Architect., 9(5), 691-700.
  26. Wang, C.C., Wang, H.Y., Chen, S.H. and Huang, C. (2015b), "Analytical model of ultrasonic pulse velocity of waste LCD glass concrete", J. Mar. Sci. Technol., 23(5), 732-740.
  27. Wang, H.Y. (2009), "A study of the effects of LCD glass sand on the properties of concrete", Waste Manage., 29(1), 335-341. https://doi.org/10.1016/j.wasman.2008.03.005
  28. Yeonung, J., Park, H., Jun Y.B., Jeong, J.H. and Oh, J.E. (2015), "Microstructural verification of the strength performance of ternary blended cement systems with high volumes of fly ash and GGBFS", Constr. Build. Mater., 95, 96-107. https://doi.org/10.1016/j.conbuildmat.2015.07.158
  29. Zhang, T.S., Yu, Q., Wei, J.X. and Li, J.X. (2011), "Investigation on mechanical properties, durability and micro-structural development of steel slag blended cements", J. Therm. Anal. Calorim., 110(2), 633-639. https://doi.org/10.1007/s10973-011-1853-6